Humidifier own hands instead of climate technology

Unbearable heat, standing in the summer on the street, can force to build a humidifier with their own hands, because the climate technology for a home is quite expensive.

Homemade devices are usually based on the principle of cold steam. To reduce the temperature of the air in the house, plastic bottles, glass jars, computer fans, as well as rags, gauze and clothespins are used. Reckless inventors perform their own even air purifiers for the home. At the same time, waste baskets, various covers and other trifles are placed in the pantry.

The easiest way to make an air humidifier with your own hands is to put a simple jar full of cold water in the room and put a rag in it. Thus, the water will evaporate, and the air will gradually start to moisten. This method works without fail, however it is ineffective: a liter of water can evaporate only for a long time. An alternative is a wet towel located on a rope. It is also capable of creating a similar effect. And yet the performance of such technologies is practically zero, so those suffering from stuffiness began to invent all kinds of devices.

If there is a desire to produce an air humidifier with your own hands, you need to clearly define the components. In fact, the design of the homemade device is very simple and consists of some water tank, a special cover, a fan with a diameter of about 140 mm, filters made of cloth and a voltage regulator necessary for the operation of the rotating element. As a container for the device is most often used a plastic bottle, which is an excellent receptacle for water supply. Its volume does not matter much.

Make an air humidifier with your own hands is not at all a problem. True, in many cases, the inventions are cumbersome, unaesthetic and noisy. However, this does not prevent them from performing the basic function, moistening the air up to seventy percent. Some models work thanks to self-moistening discs, which are constantly wetted with water. Another version of the device is a design that operates on the basis of a computer fan that converts individual droplets into water vapor.

So, how to create a simple homemade device for moisturizing? For this purpose, a plastic bottle is taken, in which a hole is cut 5x10 cm. Then it is suspended by a notch up on the battery tube, which is located vertically. For fastening, fabric ribbons are used, fixed on the bottle with usual tape. One end of the gauze folded in the form of a wick is lowered into the slot, and the other is wound on a hot battery. The bottle itself is filled with ordinary water. If you need to buy an air purifier, but the money is not enough for the device, then it can also be made from improvised means.