How to tint glass car correctly

Tinting is the simplest and most affordable way to change the look of a car. On the pros and cons are often argued, but the fact that with the right selection of such a film can make cars more attractive and original, they say more and more often. So, let's say you decided to put a tint film on the glass of your "iron horse". Where to start, and in general, how to properly tint glass, we'll try to figure it out.

Before you buy a darkening coating, find out which glasses may undergo a change in light transmittance and which ones do not. According to the law of the Russian Federation, the shading of the windshield with a film whose light transmission coefficient is less than 85% is forbidden. In addition, when you get to another country, you obey its laws, so the norms and what and how to tint glasses can be different. Before traveling, it is better to clarify this point in order to protect yourself from unnecessary problems abroad.

Let's say you decide to buy a film and start transforming your car yourself. The action is really uncomplicated. The material with which you will work, consists of a transparent polyester film (it is attached to the glass), which is specially coated on a metal base. Tinting is fixed on the inner (!) Part of the glass, which reduces the likelihood of mechanical damage to the obscuring coating and protects it from various weather phenomena.

Having learned how to tint glasses, many begin to treat this process without due seriousness. Indeed, everything looks rather simple, but this is only the first impression, and it is deceptive. For a beautiful and high-quality result will have to work.

The procedure for darkening the windows starts with the fact that it is necessary to degrease and clean the windscreen from the dirt. This should be done without regretting the time, since in places where there is even a speck of dust, an air bubble begins to form in a short time, and this leads to peeling of the entire coating. Do not forget to remove the radio and cellular antennas from the glass. If in this case with the front and side windows everything is quite simple, then the rear will have to suffer. If you are faced with a situation where you do not know how to carefully remove the brake light or damage the heating, and also do not know well how to tint the rear window, it is better to consult a specialist. In this case, the effect will be excellent and long, which everyone desires.

If you managed to visit at least once in a professional workshop, then for sure you happened to see that the masters are working with the glasses removed from the car. To argue about how to properly tint glass, half-board or do without dismantling is not worth it. Real masters know what they are doing, but the usual car owner, the removal-installation process itself can bring a lot of troubles. From this it follows that we will not shoot anything, and therefore we will use a template. For him, we need a tissue paper. Apply it to the (rear, for example) glass and carefully draw the outline. We cut out, apply the template to the film and cut off all unnecessary. Now we have a toning that exactly corresponds to the required dimensions.

About how to tint glass and what to use as an adhesive, provided a lot of information, but the most common way is the one that uses soapy water. The advantages of such a solution are several. Firstly, when the tint is placed on the surface of a glass soaked with such a liquid, it is fairly easy to move around the surface, make the necessary adjustments, etc. Secondly, it is cheap and reliable.

On the issue of adjusting the darkening film, in particular over a large area, the instruction "how to tint the rear window" is also worth adding one more item. Unlike wallpapering, which is compared to toning, many "masters" film, although stretched from the center, but it needs to be done very carefully, since even a small effort can lead to deformation of the entire coating. Pull the film over the tips.

Knowing how to tint glass, do not expect that everything will turn out the first time. Consider that it is easier to work with a more expensive film, therefore, the choice should be made not according to the "so go away" principle, but it is better to immediately get high-quality material. It is not afraid of scratches and serves at least 5-7 years longer than cheap analogs. Good luck to you!