HomelinessRepairs

How to remove vinyl wallpaper from walls without problems?

In order to form a new decorative coating of walls, you must first get rid of the old. As a material for decoration, vinyl wallpaper could be used. Before you start deleting them, you need to familiarize yourself with what this material represents. As its main positive feature is the possibility of washing the walls.

Vinyl wallpaper can be produced on a non-woven or paper basis. The structure of the material is similar to a pie, the top layer of which consists of vinyl, the second layer is made of porous plastic, while the bottom layer is the base. This structure allows you to hide the unevenness of the walls, which should be taken into account when applying a new finish. After all, it may require leveling the surface, sealing up cracks and chips.

If you are faced with the question of how to remove vinyl wallpaper from the walls, you should know that they are classified into two varieties. The first is represented by a material resistant to mechanical influences, whereas the second variety is a coating that is resistant to moisture.

Preparatory work

If you are wondering how to remove vinyl wallpaper from the walls, then first you need to clean the room, if possible, for this are carried out pieces of furniture, and those that are too oversized, covered with a film. Floor can be covered with polyethylene and newspapers, so as not to slip on the surface during the work.

At the exit of the room, a wet rag is laid in order not to spread dust around the house. In order to exclude accidents, it is necessary to turn off electricity, while lighting devices should be removed from the walls. As for switches and sockets, the wallpaper under them should also be removed. For this, self-tapping screws are loosened, and the wallpaper is torn off, after the switches can be re-installed in place.

Preparation of tools

If you are wondering how to remove vinyl wallpaper from the wall, you will need to stock up a certain set of tools, among them:

  • Roller;
  • bucket;
  • Foam rubber sponge;
  • putty knife;
  • Painting Scotch tape;
  • ladder;
  • Gloves.

When choosing a roller it is necessary to prefer one that has spikes, it is also called a wallpapered tiger. The bucket will need to be filled with warm water, adding a detergent for washing dishes. This will remove the wallpaper in a short time. The foam sponge can be replaced with a spray gun or roller with a pile. In order to exclude damage to the sockets, they are usually sealed with paint tape, after the work it can be easily removed.

Ways to remove vinyl wallpapers: use of water

Quite often, home masters are wondering how to remove vinyl wallpaper from the walls. When it comes to conventional paper coating, then removing it will be quite simple. For this, the surface is only wetted with water and left for a while for impregnation. After this, the spatula or scraper material can be cleaned from the walls.

But if vinyl walls on the walls of the room, then they can have the properties of resistance to moisture. However, to remove them you can still use water. In the first case, use a spiked roller. If you can not purchase it, then you can use a metal brush or an ordinary knife, but such tools are less convenient to use.

The wallpaper has a multi-layer structure, so when you remove them you can save the wall without damaging it. Using one of the above tools, you need to perforate the top layer of the coating. Once it was done, the wallpaper should be dampened with water. You can add to it impurities, such as a dishwashing liquid or a special liquid.

Recommendations for work

Quite often, the owners of apartments and houses are wondering how to remove vinyl wallpaper from the walls quickly. Do not neglect the recommendation to add special solutions to water. In this case, the composition on which the gluing of the wallpaper was applied will dissolve more easily and quickly.

To wet the surface, you can use a spray gun or a conventional rag. However, do not use water in excessive quantities, as you can damage the walls and flooring. Once the material is impregnated, you can proceed with the removal. Better to move from bottom to top. The remaining pieces of material should be removed with a spatula.

If the finish does not lend itself, then it must be moistened again with water, it is necessary to do this as the surface dries. In some cases, the wizards decide to leave a layer of vinyl wallpaper on the wall, this is true in the case when the finish is held fairly tightly.

Removing wallpaper using steam

If during the repair you also faced with the question of how to remove old vinyl wallpaper from the wall, then you can resort to an alternative solution - use the time. However, for this it will be necessary to find the steam generator, the easiest solution will be an iron that has a stripping function. This method can be applied only after the perforation of the protective decorative layer, only after it is possible to start the surface treatment with steam.

Under its influence, the glue will start to swell, so the wallpaper will quickly succumb to the removal. Having resorted to this method, you not only clean the walls quickly, but also without dirt. Add steam to the wall with a wet rag. The walls in this case are heated by the iron through a wet rag. The effect will be the same as the steam.

Application of wallpaper glue

If you are faced with the question of how easy it is to remove vinyl wallpaper from the walls, then you can consider another technology that involves the use of wallpaper glue. In the water not only add it, but also a special liquid for removing vinyl wallpapers. This method is relevant, when the old finish does not want to move away from the walls. The resulting composition must be treated with a surface and left for a couple of hours.

After the wallpaper can be removed with solid stripes. Remove the coating with a metal brush, sandpaper or grinder. These methods, however, are more labor-intensive. Use them with the utmost care, because there is a possibility of damage to the walls.

Removing vinyl wallpaper from gipsokartonnyh sheets

Quite often novice home masters are wondering how to properly remove vinyl wallpaper from the walls. Such a problem can be posed also in the case when the wallpaper was pasted onto plasterboard sheets. This material does a poor job of dealing with the effects of moisture.

Even if you used a moisture-resistant drywall, then excessive moisturizing for it can be traumatic. Old wallpaper in this case must be removed very carefully. Their top layer is perforated and wetted with water. It is better to use special tools. The technology remains the same as with water, but in this case its volume should be significantly reduced.

Long to decide how to remove vinyl wallpaper from the wall, do not have to, if the surface was previously covered with putty. Therefore, before starting repairs, you need to take care of this. Wallpaper on non-woven base in some cases can be stratified, removing only the top layer, which does not allow moisture. To do this, the edges need to be pierced with a spatula or knife, but the base is then removed by soaking. If you used PVA glue for gluing wallpapers, then it's unlikely that the integrity of the drywall will be preserved.

Recommendations of a specialist

In order to easily cope with the work on removing the old decorative cover, which does not look like it used to be, you first need to determine on what basis the wallpaper was created. In addition, it is not necessary to wet the whole surface of the walls at once, only small areas need be treated. Otherwise, the wetted material will dry quickly, and the work will have to be done anew. When solving this issue, it does not mean better. Wet need plenty, but do not overdo it. This rule especially applies to plasterboard walls.

Conclusion

Removing vinyl wallpaper from walls is not too difficult. However, sometimes it turns out to be monotonous and time-consuming. In order to quickly start to rejoice in new repair, it is necessary to take out of the room all things and cover heavy pieces of furniture with polyethylene or newspapers. Do not forget about safety, for this, electricity is cut off. The use of special liquids will simplify the task, they should be taken care of in advance.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.atomiyme.com. Theme powered by WordPress.