How to program the console from the gate, the principle of operation

Today in the world market there are many manufacturers who are engaged in automation. It must be able to correctly program, so that the necessary technologies work well and well.

Now we will look at the remotes from the gate. If you perform their fine-tuning, then you will protect yourself from penetration by intruders and make life much more comfortable. Also, you can use the key chain not only to open the gate, but also for other devices. Let's look at how to program the console from the gate.

Remote controls from CAME

This company occupies a leading place in the production of universal consoles. They withstand different climatic conditions, and they are easy to program.

TOP-432NA

CAME today is considered the most high-quality and reliable. You can find many good remotes from her. According to consumers, the best quality model is TOP-432NA. What is the reason for this? This console is two-channel, which allows you to work with several devices at the same time, namely it is possible to open several devices at once, for example, a gate and a barrier. Its frequency is 433.92 MHz. This model is able to work at a rather large distance - 140 meters. How to program the remote from the gate CAME?

1. At the first stage, you need to close the console to the gate.
2. Then you need to press 2 buttons. Hold them until the indicator light starts flashing.
3. After that, click on any button, only you need to choose what will be used for the gate. If the indicator starts to burn exactly and stops blinking, then you have done everything correctly.
4. Take the old console that came with the gate, and click on the button to overwrite the code. It should be remembered that everything must be done quickly while the light on the CAME is lit.
5. When the indicator on the new remote control flashes several times, the overwrite will end. Now you can use it to work with the gate.

Four-channel TOP-434NA

This remote is similar to the first model. The only difference is the size and number of devices that can be programmed. The frequency remains the same. TOP-434NA - the remote control from a gate. How to program it?

1. As in the first case, it is necessary to bring the console to the gate and press simultaneously on two keys. We wait until the LED starts to glow.
2. We click on one of the buttons to start recording on it.
3. Then we press the button on the special panel to rewrite the code.
4. After the indicator flashes 3 times, you can start using this remote. The data was successfully overwritten.

TOP-432ЕЕ

Recently there was a new keychain from the TOP-TOP-432ЕЕ series. It can allow you to work with devices that have been programmed with different encodings, such as TAM and TOP. To get started with this remote:

1. It is necessary to press the key on the new key fob, which you want to use later for working with the gate. We wait until the flashes on the indicator appear and release the button.
2. Repeat this button.
3. After the performed actions it is necessary to quickly bring the old remote to the TOP-432ЕЕ. Press the key on it, which allows you to open the gate. When the LED blinks 3 times, you can start using the device for its intended purpose.

TOP-432EV

This console is considered an improved version of the previous model. It has a fairly small size, which allows you to carry it in your pocket. Also TOP-432EV can contain 4,096 code operations. How to program this key chain?

1. As before, we pinch two keys until you see the light bulb flashing. Then release them and proceed to the next step.
2. Select the button on which the data will be moved.
3. We are waiting for a few seconds until the LED is constantly on.
4. We bring a new panel to the bottom of the other keychain and wait for the overwrite to be executed. This usually takes about 10-20 seconds. When the LED blinks 3 times, you can be sure that the recording has been completed successfully.

Came Twin

Another novelty is the keychain Came Twin. It has one feature - code protection. Outsiders can not just grab the code to open your gate. They are also available in different variations - two and four buttons. Came Twin is capable of working with dynamic code. How to program the remote control from the gate?

1. First you need to make sure that this keychain can already be used and there is a button for receiving the signal.
2. We bring the console as close as possible to the receiver.
3. Next, take the old key chain and press the key, where the necessary code is written. We wait until the LED lights up.
4. After 10 seconds click on the key, which is on the old remote.
5. After about 20 seconds, the process of writing the code will end.

Nice Company

Italian company Nice is in the top for the production of automated systems for various equipment. Their products are high-quality and reliable. Of course, they have universal remote controls that allow you to control some processes at the same time. How to program remote controls from the Nice gate?

Nice FLO and FLOR

Keyrings from Nice are quite simply programmed. All models of the FLO and FLOR line can work with a dynamic code at a frequency of 433.92 MHz. They can work even if they are at a distance of 140 meters from the desired object. The consoles are released with one, two or four keys. Consider, for example, how to program the console from the Nice FLO2R gate.

1. First you should go to the receiver.
2. It is necessary to arrange the consoles in series.
3. Next, select the key to write the code and click on it.
4. After 5 seconds, you can press the button that is used to open the gate on the old remote.
5. It only remains to repeat the key press on the first remote. The programming of the button is completed.

Hormann

This is a German firm that relies on quality. Its products are quite reliable and beautiful. The manufacturer colors different buttons in different colors to determine certain frequencies for them (blue - 868 MHz, green - 26.975 MHz, gray - 40 MHz).

Hormann HSM 4

This model is equipped with four buttons that allow you to control various equipment. Hormann HSM 4 has a frequency of 868 MHz and the ability to use dynamic code. You can also note the fairly small size of the key fob. How to program the console from the Hormann HSM 4 gate?

1. We place a new remote near the old one.
2. After that it is necessary to press the key, which will be read. We wait until the light illuminates.
3. Then you need to press the key that you need to use later. After 5 seconds, the LED will flash rapidly. The code transfer is complete.

Hormann HSE2 and HSM

HSE2 has a two-channel mode of operation, and HSM - two and four-channel modes. It has a small size that allows you to cling it to the keys. The first model operates at a frequency of 868 MHz, and the second - 40.680 MHz. To program them:

1. First you need to arrange the consoles close to each other.
2. Take the old key chain and click on the key with which you want to read the data.
3. Next, press the key that you select for use in the new remote.
4. It remains only to wait for the LED to blink. Let's release the keys and we can start using this remote.

Doorhan

Doorhan is a Russian company. It has already entered the world market for a long time and supplies high-quality equipment for automation of work with gates and radio receivers.

Doorhan Transmitter 2, Transmitter 4

These models work with a dynamic code at a frequency of 433 MHz. As you already noticed from the title, key fobs can work with 2 or 4 different devices. How to program the remote from Doorhan?

1. First you need to delete the old entries. To do this, click on the key with which you can record, and wait. After 15 seconds all will be deleted.
2. Next, you need to press the SW1 button (or any other that you need to program) and on the old key fob to write data. We are waiting for a few seconds.
3. This concludes the recording. You can start using it.

Company BFT

The most common consoles of this company are BFT Mitto 2-12, BFT Mitto 4-12. They are two and four-channel respectively. Are capable to work on frequency 433,92 MHz. How to program the remote from the BFT gate?

1. To transfer data, press the OK key.
2. Next, go to the PARAMETER item and press the "-" button a couple of times.
3. Repeat the click on OK. After that you will be in the menu where you can add the device.
4. Press the AD start button and click on the desired button.
5. Next, click on the corresponding key in the old keychain and wait for the data to be overwritten.

Faac Company

It is quite a popular Italian company. Its products are used in many countries of the world.

Faac XT2-868 SLH and XT4-868 SLH

These models are used to control two or four devices. XT2-868 SLH and XT4-868 SLH operate at 868 and 35 MHz respectively. They can also be used in different climatic conditions. How to program the console from the Faac Gate?

1. First, you must simultaneously press the buttons P1 and P2 to program the key chain.
2. Next, you need to arrange the consoles together.
3. As soon as the LED starts to light, you must hold the key on the old device that will be used in the recording.
4. In the new remote control, select the Slave button. After 15 seconds, the recording will end. Then you can start using this remote.

Conclusion

Today, you can program the discussed remotes for many devices. How to program the remote control from the gate? As you can see, this is done quite simply. In many consoles, the actions are very similar. For everything to go well, follow the instructions. The console you can choose any company that you like best. Of course, you should choose the right frequency. This will be an important parameter when selecting a remote.