How to make and how to fill a slide from the snow?

A slide of snow with your own hands is ideal for adults and children. After all, you only have to spend a few hours building a structure. But for the whole winter your children will get a beautiful ice attraction.

Together we begin

How to fill a hill with snow? To do this, you need a little - snow, desire and enthusiasm. Well, a few more hands. It is good to involve the children in this matter. After all, a hill made of snow, made by your own hands, will be especially loved if it contains a part of your work. More small children can be assigned the simplest and most elementary work, for example, to bring snow in children's buckets or to roll snowballs. The older children can be puzzled by the construction of the steps. But the more experienced one can even be entrusted with the pouring of the descent with water. Believe me, the process of building slides from ice and snow to children will be remembered for life. It's so exciting!

Required inventory

Before building a slide from the snow, we will prepare the tools and devices that will be needed for work. There should be a lot of snow, so that a frame and steps can be built from it, and also slides in the process of operation. Also it is necessary to prepare:

• Shovels (by number of employees);
• Pieces of plywood (you can take used, not necessarily whole);
• Water.

It is advisable to equip children well, who will help you with the construction. After all, the main thing in this business is not getting sick, and not just the solution of the question: "How to fill a hill with snow?" Therefore, children should wear waterproof overalls, and also have several pairs of mittens. Take care that the kids do not sweat and do not unfasten at the same time, otherwise it's very easy to catch a cold.

Specifications

Any building object must have its own parameters. They depend on the age of those who will ride on a makeshift hill. If it's teenagers and adults, you can safely build a hill a half to two or two meters high. If the children ride on this snow attraction, then the height of the hill must not be more than one meter.

The length of the descent, so that it is easy and not dangerous to ride, should be about 5 meters. It is very important to calculate the angle of descent. The hills should not be made too steep, the slope should be about 40 degrees. If you make it more, then the pleasures of The descent will be less, in addition, at the end of the descent on a steep hill child can get a tangible blow. But too sloping hill will be uninteresting, because then the speed of the departing will considerably decrease.

The width of the roller coaster should be sufficient so that it can be rolled off the sled. This is about half a meter, not more. Thinking about how to fill a hill with snow, do not forget about the ledges on the descent to ensure safety. Otherwise, kids risk falling, not reaching the end.

Do not forget about reliable steps - it will be easy for them to climb the hill, and if they are sprinkled with sand, they will cease to be slippery.

Advantages of snow slides

If you make a slide in the beginning of winter, then later throughout the snowy time it can be improved and modernized, adding arches, turns, making branches, pouring and decorating with snow sculptures. The advantages of this design are obvious:

• Construction can be carried out with children of all ages;
• No special costs for expensive materials or specific tools are required;
• You can experiment and apply your own design.

Before you fill the hill from the snow, you must choose a convenient place. It is very important to place it away from the roadway and away from the paths. See how well it will be lit in the evening, because it's getting dark early in the winter. Choose its location so that there are no bushes and trees nearby, no fences and hatches, no pillars, nothing that could be dangerous for skiers.

Shovels in hand - and forward

It is better, of course, to guess when a relatively warm day comes. Then the snow will be sticky and the construction process will be greatly facilitated. How to make a slide from the snow? To start, we roll a few snowballs of different sizes. The biggest one is put in the base, then we install a smaller ball and so on until the very descent. Empty space between them is covered with snow and densely packed.

Then we form the steps. They should be wide enough and not too high. On the line of descent is recommended to lay sheets of plywood - then the surface will be smooth and smooth. Plywood should be covered with snow and densely tampered with a surface approximately 10-15 centimeters thick. Then, after pouring the water, the descent will not sink and no holes and bumps on it will appear.

Fill it several times

When the frame of the hump is ready, it remains only to fill the descent with water. It is best to repeat this several times within a few days so that the ice layer is strong. Otherwise the ice will quickly break the sledge. Do not pour water with a strong stream, so as not to blur the snow, do it carefully and leisurely.

If there are already frosts on the street and you can not choose a warm day for the construction of a slide because of meteorological conditions, then plywood and wooden shields can be installed and filled with snow.

Also from snowdrifts that are well pressed, it will be convenient to cut out snow bricks. They are laid, for example, in the base of the steps.

Steps initially also worth pouring water - then they will acquire a fortress and will not crumble under your feet. Once they are well frozen, they must necessarily be sprinkled with sand, so that the children can safely climb them.

Think about the top of the snow slide. It should be smooth, safe and relatively large, so that the child does not fall off it. You can also put boards or plywood on top of it. But be sure to ensure that the site is not slippery.

You can make two descents from one site: one steeper, the other more gentle. Do not forget to decorate your hill with an arch or a merry snowman - your attraction should not only be functional, but also aesthetically attractive.