On a private plot there may be a water shortage problem. The fact is that not all dacha cooperatives have centralized engineering communications. In this case, you can make a well on the water with your own hands. This procedure is quite heavy physically and requires the use of special devices (drills). Naturally, in order to dig such a structure, you must always find the right place. The fact is that the groundwater can be too deep, and you can not dig a hole yourself. In addition, on your choice depends on the purity of water, the durability of the structure, as well as the laboriousness of the work. And in the ground there may be stones or too hard rocks that can not be pierced by hand. Also, the upcoming facility should be located away from sewage pits, sewage systems, burial grounds and other places that contribute to contamination and contamination of water.
Independent digging of the well will cost much less than hiring special equipment. This way you can achieve a depth of 30 meters. Let us examine in more detail the two main ways of carrying out this procedure. For example, often the wells are drilled by their own hands, using a rotary technique. However, in this case, it is necessary to ensure the release of excess soil to the surface, and this requires a large number of augers. It is very difficult to construct such equipment on its own, therefore most often only one screw is used, which is rotated by several people. In this case, every half a meter, the bur should be removed, and the hole should be cleaned of excess land. To raise the auger it is necessary to build a special wooden structure on three legs and a simple winch.
The construction of a well on water by one's own hands is a painstaking process that can be carried out using a rock-and-wire method. Its main advantage is that you can work independently. However, digging a well in this case will be much longer. The presented method requires the use of primitive equipment, which can be manufactured independently. For this, a pipe of metal of the required diameter is needed, which is attached to a three-legged wooden structure using a rope. If you want to do wells on water with your hands in this way, remember that the first half a meter must still be drilled with a garden drill, which should have a small diameter. Now you need to run a homemade "glass" in the prepared pit and let it go. This is how the forward movements are made: the lifting of the pipe and its sharp lowering. After 3-4 such movements, you should get a glass and clean the well from the ground.
The peculiarity of this process is that you can work without a tripod. Although for this you must be very strong physically. A well under the water with their own hands is built in the warm season. After the trench is ready, and you have reached the liquid, it is necessary to strengthen the walls of the structure, equip the bottom with a special filter net, and also to lower into the well a pump, through which water will be supplied to the surface. On top of the well should be covered, so that it does not get debris. The design is ready for use.
A homemade water well, the technology of construction of which is not difficult, will help provide you with clean liquid, and in the amount that you need.