How to make a tennis table by yourself: the sequence of works

Table tennis is a very exciting game. She helps to relax, in addition, she trains agility, attention and speed. Part of the inventory can be done by yourself. So, before you begin to follow the instructions "How to make a tennis table with your own hands," you need to prepare all the necessary tools and material. For the main surface, you can buy a sheet of particle board, cement chipboard or OSB, the thickness of which should not be less than 2 cm. In addition, you will need a primer (resistant to moisture), putty and paint for outdoor work. The material of the countertop must be sufficiently dense to allow the ball to bounce off its surface well.

Before you begin to solve the problem of how to make a tennis table with your own hands, it is advisable to draw a drawing of it on paper, in which to specify the exact dimensions of the main field, the location of the grid, and the height and dimensions of the legs. The easiest way is to make wooden supports, although small diameter pipes can be used. They must ensure the highest possible level of surface. The place of installation of the table must be protected from wind, rain and direct UV rays. In addition, the base on which the table will stand and the area around it should be well tamped.

When deciding how to make a tennis table yourself, do not neglect some of the nuances of its installation. Care should be taken to ensure that the field rests firmly on the legs. If the design is on the street, then fix the countertop to the racks is not worth it, since you have to hide the table for the winter in the room. For the subsequent correct installation, the bottom surface of the field must be marked.

If you do not know how to make a tennis table with your own hands to the end, then read the article next. The final stage of the production will be the application of paint and necessary lines to the surface of the field. So, first the top should be primed with a water resistant product. If necessary, it can be puttyped. Then it is necessary to put a layer of paint on the plate. In this case, you should choose a material for the finish, which will not shine - it is better to take a sufficiently dark color. Otherwise, the ball simply will not be visible on the surface of the field.

If you do not know all the same, how to make the tennis table on, then read the instructions to the end. It provides for marking the edges of the table with white paint. The thickness of the line should be small, only 2 cm. Then, just in the middle of the field, a grid with small cells is installed. Its height should be 15 cm. It can be fixed on wooden or metal slats, fastened to the plate.

It is not difficult to make a table with your own hands, you only need to observe certain sizes. For example, the height of the countertop is 76 cm. The width of the slab should be 1.52 m, and its length is about 2.74 m.

It should be noted that the table can be stationary or collapsible. The first option is made if the design is installed in the room. In this case, it is necessary to fasten all parts of the structure using metal brackets. In principle, these are all the features of arrangement of a table for ping-pong. Good luck!