How to make a stand for a boar with your own hands in many ways?

The Bulgarian is an electric tool with which you can perform a large amount of construction work. It cuts metal parts, stone and other hard materials. It can be cleaned and polished surfaces, cut to size ceramic tiles. This tool is irreplaceable for installation, construction and repair work. Use it for home and workplace.

Safety regulations

The Bulgarian is a dangerous thing, having huge turns. If you do not follow the rules of use, then you can be severely injured. Before starting work and making a self-made stand for a Bulgarian, be sure to read the safety rules.

1. When cutting hard materials from under the abrasive wheel, different particles of metal or stone, sharp fragments fly out. The first reliable remedy for the wreckage flying in the face of the master is the goggles of a closed type. There are cases of rupture of the circle itself. Fragments can hit the glass and break them, so the glasses should be reinforced, with a protective mesh. Do not be stingy, this is your health.

2. On the Bulgarian it is necessary to have a screen surrounding the knives. Some workers, putting on a circle of large diameter, remove the hood, which hinders the movement. Also, when making a stand for a Bulgarian, they can get rid of it by themselves. In no case it can not be done. It is put in a mandatory manner and in such a way that the operator is behind it. In this way, the fragments fend off the casing and fly in the opposite direction.

Stand for Bulgarian

In the work with this tool many masters have to perform uniform identical cuts. Holding it in your hand, the smoothness of the band is very difficult to achieve. Strong turns and vibration do not allow a person to hold the product in exactly one position, the hand will necessarily move. To prevent this from happening, they buy a stand for the Bulgarian.

But with strong permanent loads and vibrations, the parts of the stand loosen and crack. Yes, and it is designed mainly to work with a circle with a maximum of 125 mm. Big there can not fit. If you want a strong and reliable stand for a Bulgarian, the best option is to make it yourself. Independent manufacture will add confidence in the quality of fastenings, the master will work quietly.

Small device for home use

This stand for the Bulgarian is made for own use only at home, for small works. It is made of plywood and wooden bars. The instrument itself is fixed and does not move. Take two sheets of plywood. The lower square is strengthened by the clips of the Bulgarian and the bar is bolted in the form of a stand.

The second part is placed on top of the furniture loops. A slit is cut for the abrasive wheel. The advantage of this arrangement is that the master does not hold the tool in his hands. Also, the circle is partially visible and will not be able to fly out, causing injury to the operator. Suitable is an easy-to-use device for cutting small metal corners, aluminum profiles, ceramic tiles.

Welded construction of metal

When manufacturing this model, you need to have a drawing of the rack for the bulgarian of your size. Work is carried out from the metal profile and tubes using a welding machine. The platform for the stand must be heavy, it is capable of withstanding high power vibrations. Further, the upper part is carried out, to which the tool itself is attached together with the casing. On bolts the design is installed to the welded corner on two metal legs.

In order for the stand for the Bulgarian to move smoothly, the upper and lower panels are connected by a strong spring, for which holes are drilled. On the platform, the guide angle is welded at a right angle to the circle.

The pendulum pillar

What is good for a bulgark stand in the shape of a pendulum, so this is a simplification of the sawing process. Due to the stop on the table and the system of this design, it is possible to perform works of different complexity and to cut materials of any density. With such a device you do not need to exert any special effort, pressing is carried out by the mass of the tool itself.

To manufacture this version of the stand you will need a spring, two hinges, a metal profile, corners and a welding machine. It is also desirable to have a sturdy iron table, on which the entire structure can be installed. Having skills of such works, the master will quickly make such a pendulum. It is much easier to work if the handle is long and comfortable. The fingers of the hand are at a safe distance. You do not need to bend. Sparks and debris fly in the opposite direction. And having a free approach to the table, you can work with large-sized materials and products. This is convenient and allows you to perform a variety of processes.

Choosing a rack that is suitable for you in all respects, do not forget about safety. Then the work will bring only joy.