How to make a cone of paper for a Christmas tree with your own hands

If you decide to make a Christmas tree by the New Year with your own hands, you will have to learn how to make a cone of paper for a Christmas tree. All products are usually performed on this frame. Of course, you can buy a ready-made foam cone, but, firstly, it is not too cheap option, and, secondly, you will be limited by the size of the product you found. The best idea is to make an independent basis. Study the possible options. Use the appropriate method of work.

Production methods

If you are thinking how to make a cone of paper for a Christmas tree with your own hands, you can be pleased, as there are several possibilities for making the basis for decorating:

1. Collapse from the sheet on the principle of a bag.
2. Glue on a pattern drawn on the basis of a circle.
3. Make a papier-mache method using the bulk billet.

In the following sections, you will learn in more detail how to make a cone of paper for a Christmas tree. The photos will clearly illustrate the process of work and the result obtained. Each of the methods is quite simple in work, and which is more convenient - it's up to you.

Tools and materials

Whichever method of manufacture you choose to make a cone of paper for a Christmas tree, you will need the following:

• A sheet of paper, cardboard or colored paper.
• Pencil.
• Compasses or stencil (plate, dish, basin).
• Scissors.
• Glue or thermo-gun (you can take a double-sided adhesive tape or a stapler).

This is all that is needed. In some cases, you will also have to use a knife.

How to minimize a cone from a sheet

This method is simple and easy. A child can also make a blank. To understand how to make a cone of paper for a tree in this way, it is enough to take a rectangular or square (what is available) sheet of thick paper and roll it in the form of a bag. The harder you wrap the workpiece, the narrower (slimmer) the cone will be.

To fix the product, you can glue the PVA seam, thermo-gun, staple it, use double-sided adhesive tape.

The next important step is the undercutting of the bottom, since when the rectangular sheet is twisted, not an even edge will appear below, but with a corner on one side. Cut the part as neatly as possible, because it will depend on how much the base of your tree is parallel to the horizontal plane.

How to perform an even bottom

From the previous section you learned how to make a cone of paper for a Christmas tree by the method of twisting from a rectangular workpiece. If you can not make a neat bottom, just cut it with scissors, and the Christmas trees need to be done a lot, you can make an aid for leveling. It represents a pattern of cardboard with a round hole corresponding to the diameter of the base of the cone. To make such tool it is possible so:

1. Take a thick cardboard, for example, corrugated or glue the workpiece from several layers.
2. Draw a circle with a compass or draw a suitable pattern around the contour (a plate).
3. Cut out the hole.

Use this tool as follows:

1. Insert the cone folded from the sheet into the hole so that the contour of the tool circle matches the bottom of the cone.
2. Take a sharp knife and cut off excess paper.

Before you ready cone with a neat bottom.

How to make a cone of paper for a Christmas tree: step by step instruction

You can also make a base in another way using a pre-prepared template. In this case, you do not have to align the bottom part, since it will turn out neat. To work with this method, you need to do the following:

1. Draw a circle on the cone making sheet, the radius of which corresponds to the height of the tree.
2. Through the center, draw the diameter guides perpendicular to each other.
3. Cut the circumference along the contour.
4. Determine and cut out the part of the circle that you will use for the cone. You can take a quarter (for a cone of small diameter, that is, slim), half for an average and three quarters for a wide one). For the fir tree, the first two options are more suitable, since the third is more like a cap or a house roof.
5. Join the workpiece by gluing the seam.

A neat cone is ready.

How to glue the base

In any of the presented ways of manufacturing the cone, the result is a hollow billet that is the thickness of the selected sheet of paper or cardboard. If you are satisfied with this option, you can start decorating. However, most often the fir-cones are not hollow, but have a solid foundation. It not only gives the finished form a finished appearance, but also gives additional strength on the basis, which is important, since it will be decorated with a decor that has a certain weight, and the structure should not fall apart under it.

The options are:

1. If you fold a cone from a rectangle, circle the circle of the base on the prepared cardboard.
2. If you used a tool to level the bottom, use a hole in it as a stencil for the bottom.
3. Working with the template, you can also trace the base of the manufactured cone or calculate the diameter of the circle by the formula, measuring the circumference (the bottom of the cone).

As for the gluing of parts, it can be done with a thermo-pistol without additional allowances for gluing, but simply by butt (connect the thickness of the cone wall to the base circle). If you use a conventional PVA, it is worthwhile to provide allowances for gluing, since the strength and setting speed of this composition is less than that of hot melt adhesive. The allowances can be made both on the base part and on the lower part of the cone. It is better to hide allowances inside the billet.

How to make a cone of paper for a big Christmas tree with a photo

If you decide to make an interior tree, which you plan to put on the floor to decorate the room, then with the creation of the frame you will have to work a little more than for the desktop version. The most important for such a cone is strength, therefore, in addition to the cardboard wall, it is necessary to provide for the frame elements. It can be a wire or rod made of another material (a wooden stick, for example). It will go through the center of the cone, performing the role of an axis. Well, if you fasten it hard at the bottom.

It is also easy to make additional stiffeners in the form of circles of cardboard of the appropriate diameter, which will be pasted over the whole height of the cone at an equal distance.

If you are going to make a cone for a big tree, a certain difficulty can cause a drawing of a circle of the appropriate diameter, which can not be made a usual office tool. In this case, you can select one of the following methods:

1. Take a basin or other piece of suitable diameter (bucket, mirror, stool, countertop - what is on the farm).
2. Find the compasses that are chalked on the school board with chalk, and use a marker.
3. Make the drawing tool yourself from the rod, which can be fixed in the center of the circle (a stick with a needle or stud), and a writing instrument attached to a thread or rope to the top of the axis.

Technique of papier-mache

This section also teaches you how to make a cone of paper for a Christmas tree. Big or small you need size, in this case it does not matter. The workpiece is firm and firm even without an additional frame. This option is suitable for those who do not have a single thick sheet for making a cone of the appropriate size.

To work with this method, any paper, even newspaper or old magazines, will fit, however, you need a base-workpiece. You can use the plastic cone from the children's designer (the original part will not spoil and return to the place), plasticine, gypsum, foam. With one template, you can make a lot of papier-mâché workpieces. Proceed as follows:

1. Cut or tear newspapers to small items.
2. Wrap the prepared template with a plastic wrap and cover with PVA.
3. Apply a layer of paper pieces on the dried adhesive.
4. Dry the first layer and then apply a second one using the same technology.
5. Work until the required thickness of the workpiece.
6. Cut the resulting carapace and remove the original part.
7. Install the core-frame if necessary.
8. Apply a few more layers to bond the halves.

All is ready.

You learned how to make a cone of paper for a Christmas tree. Begin by making the base, and then proceed to decorating it.