How to glue wallpaper on a non-woven basis, the fineness of the process

Among a wide variety of wallpapers, wallpaper on a non-woven base will be an excellent choice. This type of wallpaper will regularly last a long time, and the question of how to glue wallpaper on a non-woven base, will not be as difficult and tedious as sticking a paper type. Flizelinovye - this wallpaper with a high degree of environmental safety, on the wall they look like an ideal holistic surface without fractures and seams. But that the whole process of pasting from the beginning to the end was correct and pleased with the ideal result, you need to figure out how to glue the wallpaper.

On a fleece base, many beautiful wallpapers are produced. But what is it? This is a fairly popular form, they differ from others by their high strength, they have noise-proof properties. In addition, they are very flexible, which facilitates the process of pasting walls. The basis for such wallpaper is made of a mixture of mineral fibers and cellulose, and as a front part, foamed vinyl is used. The variety of types of relief pattern is amazing. Among them you can find exclusive wallpapers for walls, wallpaper with intricate, geometric, floral patterns and a variety of color variants of canvases.

Perhaps those who have never done a repair of the walls with their own hands before, our recommendations will lead to a dead end. But for those who are not afraid of work, we will explain how to glue wallpaper on a non-woven basis.

The first stage of gluing is the preparation of walls. Proper surface preparation will ensure an easy gluing process. Similarly, the surface is prepared for Japanese wall-paper. A peeling layer of paint or old wallpaper is removed from the wall, dust is removed, chips and cracks are filled with alabaster. After that, the entire surface is primed with a special adhesive antiseptic primer.

The second stage consists in that by means of a plumb or level it is necessary to draw a straight vertical line which will serve as a starting point of pasting. By the way with flizeline wallpaper you can forget that the pasting should start from the window deep into the room, so that the joints of the wallpaper are not too noticeable. Wallpaper on a non-woven base perfectly fit at the joints, so you can start work from anywhere in the room.

The third stage is the cutting of wallpaper and, in fact, the process of pasting. Apply glue to the wall, along the vertical the first wallpaper cloth is applied and smoothed out with a roller or a rag. Excess glue, crawled out from under the edges of the canvas, carefully and neatly removed. This is especially important if the wallpaper is then painted. Subsequent webs are glued to butt.

The peculiarity of the whole process is that the wallpaper itself does not lubricate with glue, they remain dry, and the adhesive layer is applied only to the wall. This greatly facilitates the whole process. It should be noted that the glue must be special, for this type of wallpaper. On the wall or ceiling it is applied by any method (brush, roller, brush), not abundant, but there is no need to save here. Another nuance is the corners, here the wallpaper is glued with separate canvases from each side of the corner, in the corner is made a small allowance so that the edge of the top canvas clearly walked along the angle line. That's all there is to say briefly about how to glue wallpaper on a non-woven base.

Flizelinovye wallpaper is very convenient to work, have a lot of advantages and serve for a long time, decorating the interior of a modern home.