How to choose a cooler for water with a refrigerator: a review, models and reviews

The human body is 70% water. And the water balance needs to be constantly replenished and maintained, the quality of life and productivity depend on it. There is no doubt that the better the water that people drink, the healthier these people will be. Long gone are the days when water was consumed directly from the tap. Today, for this purpose, there are special devices.

The technical equipment allows to purify water or to buy in the store already ready and packed. But the container and hand pump are not always convenient to use. In addition, a bottle of water does not always look aesthetic, so it is unacceptable for office premises or any other organization. A great way out of this situation is a water cooler with a refrigerator.

Cooler or dispenser?

A cooler is a system that doses bottled water. Professionals call this device only as a dispenser. Distinguish household and professional apparatus.

In general, the dispenser is a strictly dosage device. Its main task is to give out something in small portions. Dispenser or cooler for water with a refrigerator is a special household appliance designed, depending on the functional features, for pouring water, cooling it or heating it. Some devices also allow to gasify or ionize water.

The device of the water cooler with a refrigerator

Household and professional coolers, which need to be connected to electricity for operation, consist of a housing, a water chamber, a check valve, a heating element, a refrigerator, electronic sensors.

Depending on the technical equipment, several types of these apparatuses are distinguished. They can also vary in size and performance. So, differentiate floor and desktop devices. In this case, the desktop is designed exclusively for domestic use, while the floor cooler for water with a refrigerator is only office equipment.

Principle of operation

These devices work very simply. Water from plastic containers is fed into the cooling and heating compartments. When the water level in these tanks decreases, a new portion is fed there.

Features of office dispensers

Any floor model is produced taking into account intensive use every day. They are very advantageous to put in offices where there are always a lot of employees or visitors. They are acquired and installed in office premises, medical institutions, places of public catering.

Due to the size and the possibility of a stationary installation, floor models are often multifunctional. First, for a floor system, no special platforms or supports are needed. In addition, in the lower part of the manufacturers build a refrigerator or other functional elements.

Advantages and disadvantages of floor solutions

Among the advantages of this group of equipment is multifunctionality. Manufacturers offer devices for almost any task of modern offices or any other institution. The majority of devices are equipped with refrigerating chambers. There is no need for stands and platforms, since the design is separate and independent.

Among the shortcomings is high energy consumption. Also a major drawback, which differs any similar cooler for water with a refrigerator, is the price. It is quite high. Another drawback is very simple access to chilled and hot water. Children can accidentally burn themselves.

Compressor or electronic cooling?

A water cooler with a refrigerator uses a compressor for cooling. But there is also an electronic cooling system. Consider their advantages and disadvantages, as well as the main differences.

Features of compressor cooling

Compressor equipment allows you to adjust the temperature. Also the positive moment of these devices is that the cooling rate of water here is more than in any other systems. With regard to performance, the refrigerator in this device can cool about 2 liters of water per hour. This is a reliable and time-tested solution. The operation of the device is independent of the ambient temperature.

Also, in addition to dispensers for bottled water, there are also devices for filtering and cooling the flowing liquid. This is more relevant in large offices because a large team needs more water.

Advantages and disadvantages of electronic cooling

Electronic cooling works by means of a special thermoelectric semiconductor module. It is made up of several thermocouples. They are between two special plates. When a constant current flows through the electrodes, one plate will heat up and the other will cool. Operation depends on the temperature of the air in the room. These coolers can cool the water only to 10 ° C and not lower.

The main advantage of this solution is the complete absence of any mechanical parts, which significantly increases the reliability. The service life of this equipment is almost eternal. Another plus is the lack of refrigerants in the design, so this group of devices is more safe for people.

Among the minuses there is a slow cooling process. So, the speed of work is only 0.7-0.8 liters per hour of work. If the compressor equipment is more suitable for offices, then the systems with electronic cooling perfectly show themselves as a home solution.

Top or bottom loading

There are two more groups of devices. The first is a floor water cooler with a refrigerator, where the water tank is installed from above. The second group - with the bottom load.

It is not always convenient to install a new 20-liter bottle in a floor cooler with top loading. Often these devices are serviced by workers who supply water, or by men who work in the office. On the bottles there are handles, but they make the installation easier. Therefore, if in the office women mostly work, it is better to buy a cooler with a lower load.

Equipment with bottles from below is much easier to operate and maintain. To replace the packaging requires much less effort. Just remove the lid from the container, install the adapter and push the bottle inside the device. This is even possible for fragile women. Therefore, in an office with a female team should buy a cooler for water with a refrigerator. Moscow offers a wide range of shops where you can buy a suitable device.

Options

The cooler's task is to cool or heat. But there are models that can cool not only water. This floor solution, where there is also a built-in refrigerator. Typically, the capacity of the camera is small - only 20 liters, but it is enough for small things. There is a more capacious water cooler with a refrigerator. Its price is not much higher than usual. For example, the HotForst V205 model provides a refrigerator with a capacity of 60 liters. Often in such refrigerators there are several shelves for products.

In addition to the refrigerating chamber, there is also such an option as an ice generator. For example, the model that prepares ice is IceS A106C. At the bottom of this compact machine there is a special department where the user can take ice. The price of such decisions starts from 20 thousand rubles.

There are also devices with the possibility of ozonization or aerating. Many choose such a cooler for water with a refrigerator. Reviews about these devices are positive, but their maintenance is costly. It is necessary to purchase containers with carbon dioxide.

The cooler is a convenient device for both home and office use.