Backlight for cabinets in the kitchen

How to build a home interior lighting? It's no secret that it's the light composition that helps to give the room an indescribable atmosphere and mood. It is also with the help of lighting that you can divide the room into zones, each of which has its own purpose. A successful lighting solution for each individual apartment space is selected in accordance with the function performed by the room, and in accordance with the personal wishes of the person who will later live in this apartment. Perhaps some changes in the light interior of the person will do, without resorting to major repair of the zone. Lighting under the cabinets in the kitchen, mirrors with special lighting in the bathroom, LED strips in the furnishings of the bedroom and living room are some possible options that a person can easily do, giving the interior a certain mood and atmosphere.

Backlight functions in the interior

The highlighting of certain zones in the kitchen can carry an exclusively decorative purpose, but it is much more useful to plan the layout of additional lighting in advance in order to ensure its functionality. The easiest way is to make the lighting in the kitchen under the cupboards with your own hands. It is performed using an LED strip, and its main function is lighting the countertop. Also, the LED strip is used to illuminate the area under the drawers and inside the drawers - for more convenient use of space, and to impart a certain character to the kitchen area if the lighting is mounted near the floor level. Lighting under the cabinets in the kitchen - one of the most common solutions for the design of this room, also no less effective are the LED lighting of the eaves in the kitchen, the highlighting of certain niches, the imitation of a bar counter in the kitchen area.

What is LED strip?

LED strip - a fairly new and very affordable replacement for complex installation of lighting systems. It is a flexible tape on which semiconductor elements are permanently fixed - LEDs.
The use of LED tape is safe: it does not contain fragile and dangerous elements, it is simple enough for installation and further use and provides the necessary norm for lighting and lighting. That is why with its help the lighting for the kitchen under the cabinets is carried out. LED strip exists in various varieties: one-color or multi-color, modification, protected from moisture and dust, varieties with different sizes of LEDs and their number, as well as varieties that require different electrical voltages and operate directly from the network.

When choosing the LEDs for lighting the cabinet in the kitchen, you should also pay attention to such characteristics as the color of the base of the tape, the heat-resistant and moisture-proof qualities of the adhesive tape. Usually, the LED strip gives sufficient illumination in order to remove the shadow from the hinged cabinets.

Nuances of work with LED strip

What is important to remember when working with an LED ribbon and installing it, when it is provided with lighting for cabinets in the kitchen? First of all, the tape can be cut and solder only in special marked areas. On a single-row tape these sections are located every three diodes, on a two-row strip - every six. To connect sections of such a lighting device, special connectors may be required, and special power supplies may be required to install certain types of tapes. They are necessary, since it is the low-voltage direct current suitable for LED strips when the kitchen lighting is installed. Under the cabinets with an outlet, a power supply unit is hidden, which will later be connected to the network. The power supply is selected according to the following calculations:

Power supply power = Belt length * Power 1 meter tape + 20% in the form of power reserve.

When connecting the lighting fixture to the power supply, remember the polarity. If it is necessary to install several large segments of the LED strip, it is important to prepare a separate power supply for each individual or to feed a section from it separately. By connecting these segments successively to each other, one can encounter a situation where the subsequent segment will give too dim light and quickly fail.

Multicolored LED Stripes

When using multi-color LED tapes, you can also use a controller with a control panel that will allow you to customize the lighting program, change colors, add various effects, for example flicker.

Kitchen lighting for cabinets: photos

There are many options for designing the kitchen workspace with the help of such lighting devices. With your hands, you can install a multi-color system, the lighting in which can vary depending on the program installed on the controller or manually. Also, the LED string can be hidden under the cabinets, performing a decorative function. Lighting for the kitchen under the cabinets LED corner can be installed with a special corner aluminum profile, which is purchased in construction stores and supermarkets.

How to install LED strip in the kitchen: necessary preparations

The installation requires LED stripes (the warm white light is the most pleasant and relaxing), the power supply for LEDs, the connecting wire and the power cord with a plug. Even before the purchase of such a lighting device, it is important to make appropriate measurements of the space on which the tape will be fixed, and the distance to the countertop. This will allow you to choose the correct length and power of the device. The place where the lighting is installed under the cabinets in the kitchen, it is desirable to rub with alcohol and wait a short time for its evaporation - this simple procedure will remove the contamination and securely adhere the tape in the future. If the contamination is too strong, the structure can be strengthened by means of connecting clamps or they can be mounted on a special aluminum profile.

How to install LED strip in the kitchen: fixing

Lighting for the kitchen under the cabinets - LED tape - is attached to double-sided scotch, while you need to monitor the reliability of attaching it to the tape and to the surface of the wall or cabinet. After installing the lighting, you must connect it to the power supply. The LED strip, with regard to polarity, is connected to the power supply, and then it is connected to the network. It is important to remember that after the work done there should be no exposed wires, and during the connection to the unit it must not be under tension. After the final installation, the structure can be connected to the network. If all actions were performed correctly and the polarity is not confused, the tape will start to glow.