How is tile laid on the floor with your own hands?

Conducting construction or repair work has recently increased significantly. This is related not only to raising prices for some materials, but also to the cost of the works. Especially it touched such a kind, as laying tiles. Since with costly material, performers also want to get paid, which is almost equal to its cost. This leads to the fact that many people have a question about how to lay the tiles on the floor with their own hands. However, it is worth noting that this issue is very extensive and has a lot of features. In this case, there is such a place in the apartment, when working in which you want to use the maximum number of different materials and processes. It is expected to operate in an aggressive environment and under heavy loads. That is why, in order to better master this profession, it is necessary to understand how the tiling is laid on the floor in the bathroom.

Tool selection

There is a huge number of different tools for carrying out this work. However, if this process is one-time, then you should not buy an expensive professional tool for it. All that is needed:

- special spatula with a comb;

- small spatula;

- glass cutter;

- Pliers;

- a hammer;

- rubber spatula;

- level;

- Roulette.

In this case, it is worth considering that laying the tiles on the floor with their own hands will be done for the first time, and therefore, the tool must be of high quality, the measuring instruments are accurate.

Material selection

As a solution, it is best to use a special glue-cement. For the bathroom you need a material that would have a protection against moisture. It is also worth to buy a special mixture called "waterproofing". In the premises of this type, its application is mandatory. Then choose a tile. Do not trust screaming signs and advertising. What manufacturer should the ceramic tile be from? Italy or the Czech Republic - it does not matter, because the tiles produced by these countries are practically no different. However, each bundle of material must be checked for consistency with the color scheme, fit and size ratio. Tiles should fit in one dimension, have the same color and fit tightly to each other. Depending on the color of the tile, a trowel, crosses and a primer are selected.

Surface preparation

For the starting point take absolutely flat sex. First it must be treated with a primer, in accordance with its instructions. Then it is covered with a layer of waterproofing and let it freeze. Since the laying of tiles on the floor with their own hands is done for the first time, it is recommended to apply a thin, thin layer of cement glue on top, which, after drying, is treated with a primer.

Stacking

After the floor has been prepared, a thick layer of cement glue is applied on it, which is then leveled with a spatula with a comb. So on the surface grooves are formed from the solution. On them, and laying the tiles on the floor with their own hands. In this case, it is necessary to use plastic crosses, which regulate the distance between the tiles, and with the help of level control the evenness of the installation itself. If you want to put a small piece, it is made with a glass cutter and pliers. However, it is better to hide such parts in hard-to-reach places.

Stitches

After the entire laying of the tiles on the floor with their own hands is made, it is allowed to completely freeze. The next day, the gaps between the tiles are wiped with a mixture called "seam". It is applied with a rubber spatula, and the debris is erased with a sponge. Once it has hardened, the tiles are stacked.