How at home to bend the profile pipe? Instructions for creating a curved pipe

Surely many builders sometimes had to think about how to bend a pipe in a certain place, for example, in a bathroom or a toilet. Previously, this process was very difficult and required the master considerable forces. After all, it's not so easy to make the profile pipe stand at the right angle. Today there are no problems with this. To facilitate the installation process help professional tools that are sold in building stores in large quantities. But still, how to bend the profile pipe at home? This article is devoted to this article.

Application of pipe benders

The process of bending pipes is difficult to imagine without special tools. Trubogib profile - this is a rescue for many builders. The range of works under which this indispensable device is used is very large. It is often used for installation works in the field of communication, ventilation, air conditioning and water supply. Very often profile benders are used when working with plumbing. Everyone knows that it is not easy to bend a profile pipe with one's own hands. To achieve the bending of the pipe without creasing, damage and flattening to the specified dimensions, it is possible using a special tool.

Advantages of using a profile pipe bender

One of the important indicators of the efficiency of construction work is the time for execution. The use of a pipe bender makes it possible to save a lot of valuable time, plus the correct use of the tool brings the work closer to a faster completion. The hours that are spent on bending the pipes are shortened, since the use of a bent pipe replaces a number of other manipulations. In the process of work, you can safely abandon the use of other tools - fittings, bends and welding. This construction tool saves space, minimizing the area for technical communications. In addition, the number of advantages can be attributed to improving the quality of construction by reducing the docking elements.

Types and models of pipe benders

In addition to profile benders, there are other types of such units. Most often, the instruments are distinguished depending on the material with which they will have to work. There are benders for aluminum, copper, steel and plastic pipes.

There is one more classification of tools - it divides them according to the type of drive into mechanical and hydraulic ones.

The former are used for bending pipes of small size, usually we are talking about steel or titanium ones. There are universal models that are suitable for the often found pipe diameters. There are also those that are made to a special size. It happens that the place where the profile pipe is bent is necessary, is located at an unattainable angle. In such cases, manual assemblies are used, which can reach an angle of even 180 degrees.

Hydraulic models are more powerful, respectively, more simple to use. They have a light weight, strong and durable body. In addition, this tool works with a pump that helps to bend pipes faster.

Hydraulic pipe benders are of two types: manual and stationary. Models differ from each other in their weight and diameter of the pipe with which they can work.

We make profile benders

How at home to bend the profile pipe? For this purpose, you can always buy a ready electric, mechanical or hydraulic pipe bender. But to make a design is more advantageous. In addition, the homemade tool can be adjusted to the desired diameter of the pipes.

The easiest way to make a home is a roller bender with a manual drive. The main part of the design here are roller mechanisms. They are placed in the form of an equilateral triangle. The winch with chain drive is connected to the base of the mechanism. The uppermost roller is attached to the screw clamp and the press. It must be done so that the parts can move rotationally.

The process of bending a pipe

How to bend the profile pipe at home, any master who independently made such a tool will say.

Algorithm of actions:

• The workpiece (pipe) to be machined is placed on rollers at the base of the mechanism and the tube is pressed tightly;
• After turning the handle of the winch, it is necessary to stretch the workpiece between the two rollers;
• Increasing the pressure, you should tighten the clamping screw several times;
• Then you need to skip the workpiece through the rollers again.

Detailed instructions for the manufacture of profile bends

To make such a tool, you need to understand the basic concepts and terms. Not every master knows that the basis of adaptation includes the so-called "cheeks." These are symmetrical sides of a sheet of steel, made in the form of a trapezoid. To ensure that the "cheeks" are securely attached, two grooves are made at the bottom of the base by an electric jigsaw. With the help of welding, a special corner is attached to the bottom of the steel sheet, which will be the continuation of the trapezoid. In each "cheek" holes are made for fastening other parts.

The working unit will work as follows: the power screw rotates, pressing on the profile pipe, the roller handle rotates the screw and moves, thereby achieving a fold along the entire stroke. The hull and self-made power screw can also be made independently.

How at home to bend the profile pipe? The answer to the question will be the study of the above instructions and an algorithm for creating a special unit - a pipe bender. With the help of this tool, you can not only bend the profile pipe, but also make souls, wireframes and other interesting things.