How to make a fence of a wooden fence with your own hands? A photo

Wood has long been one of the most popular materials in the field of construction. It is used to build log houses, make interior objects and frames for windows. This list is far from complete. The material is environmentally safe, with its help you can create an atmosphere of coziness and comfort inside the premises.

Why choose a fence

Wood can also lie in the basis of the fence of the fence, which acts as one of the most common types of fencing, which is especially true in the question of suburban construction. With the help of this fence, you can designate the boundaries of the site, not obscuring the territory. Building a fence of a wooden fence with your own hands, you can give it any shape and height. The distance between the elements can also be selected individually, thanks to this the design acquires an original and attractive appearance, complementing the exterior of the countryside.

The popularity of this fencing is explained by certain parameters, among them:

• Universality;
• Simplicity of installation;
• Convenience of care;
• reliability.

Additional advantages

Making a fence of a wooden fence with your own hands, you can enter a design in any landscape. It perfectly combines with other materials and organically looks even with products made of brick, stone, metal and concrete. Establish such a fence is simple enough, such work is possible under any master of the house and the villa. The professionals will not have to resort to help.

It is quite easy to take care of such a fence. Its surface can be painted, and if necessary - replaced by some elements that were damaged during the season. Making a fence of a wooden fence with your own hands, you can create a fairly high construction, which will be a reliable protection of possessions. As one of the main advantages of the fence is the possibility of planting plants at its base.

Preparation of materials

In order to build a fence, you should prepare some materials, among them:

• Supporting poles;
• fence;
• Veins.

Posts can be made from thick beams or metal pipes. As for the fence, it has the appearance of separate rails, the width of which is rather small. You can make shtaketiny from planed or edging boards. The cross strips for the fence will be located horizontally, their length should be equal to the limit from 2 to 2.5 m.

The basis of the veins will be bars, the cross section of which is 40 mm. If you decide to make a fence of a wooden fence with your own hands, then the material can be purchased ready-made or carried out independently. The first approach saves time. The fence can be installed on the day of purchase. However, the minus can serve as a raw low-quality wood, which is the basis of the fence.

If you have the time, then you can make a fence yourself, having spent a few days on it. You can guarantee the result. To begin with, determine the length of the fence, the pitch between the supports, the height of the structure and the size of the fence. If you decide to purchase lumber, then preference should be given to dried products. When the material is prepared on its own, the masters are usually filed and processed with the top of the skin. Support pillars of wood from below are processed by hot steam. This will eliminate decay and significantly extend the life of the wood.

Fencing installation

The fence of the fence wooden with your own hands, a photo of which you can consider in the article, is made on the basis of pillars. But first, the territory in the direction of the fence should be freed from the branches of trees, bushes and weeds, which can interfere with the construction. Laces are stretched on the site and places for installing poles are marked. The distance between them should be 3 m or less. If the spans are made too long, the cross members may sag under the weight of the rod.

Supports are usually installed in the ground, but if you want to make the construction more durable, you should use the technology of pouring mortar from cement and sand. Making a fence of a wooden fence with its own hands provides for the installation of supports on a gravel cushion, which will exclude the extrusion of poles when the soil freezes. Posts should be fixed vertically, covering with layers of soil and concrete.

On the line of the fence, the posts should be as flat as possible. Between them, sometimes the veins are set. The installation of the fence is usually carried out by one of two methods, the first involves fixing the crossbars between the supports, as well as installing the fence. The second technology assumes the assembly of spans separately, after they are attached to the supports by blocks. Usually the pitch between the pins is equal to the width of the boards. Cross bars are fixed on wooden poles with the help of screws, nails or bolts. The gates are attached to the metal poles by corners to secure the timber.

Recommendations for the installation of poles

Always read the instructions before starting work. The fence of the wooden fence is assembled by itself only after the installation of the poles. In place of pegs, which are driven into the ground at the stage of marking, it is necessary to excavate pits. Their depth should be 50 cm or more. When installing supports, one should not trust the eye, it is better to apply a plumb or level. The bottom of the pit should be concreted. In order for the post not to squint, it is recommended to make temporary spacers that will hold the product until the mixture has solidified.

Tips for assembling a structure

If you are thinking about the question of how to make a fence of a wooden fence with your own hands, it is important to get acquainted with the technology of assembly of structures. To proceed to this process is necessary only after the pillars are securely held in a concrete mixture. For this, after pouring, you need to wait about 2 days. Further work will resemble the assembly of the designer.

Fasteners are installed to posts. The gauges are fixed to the fastenings by self-tapping screws. At this stage it is necessary to note the places where the fence on the lodges should be located. Use for this purpose a marker or a pencil. This will allow you to monitor the observance of the distance between the elements of the fence. For screwing the rails it is better to use a screwdriver.

Fence finishing

Before starting work, experts recommend reading the ideas. The fence made of a wooden fence can look very original. In many ways, its appearance is determined by decorative finishing. In addition, the application of a protective layer allows to extend the life of the structure. If we are talking about freshly-clad boards, then we do not need to use film-forming agents, since they lay down badly, but do not last long. It is necessary to clean the surface of the wood with medium-grained sandpaper. The application of varnish will protect the material from moisture. You can use its transparent variety or stain.

For reference

The installation of the fence from the wooden fence with its own hands can provide for the use of supports from different materials, among them:

• wood;
• metal;
• concrete;
• brick;
• a rock.

In any case, the same distance should be observed between the elements, ready-made sections between the supports. For additional rigidity, the pillars can be supplemented with bases in the form of stops, which will go to the side. After pouring concrete and its hardening, the resulting cavity can be covered with soil.

Conclusion

Quite often, recently, a metal fence is used to make the fence. It has a polymer coating, so it does not need to be painted. But if you want to make the exterior more natural, then it is better to use wood, it is covered in the final stage with stain and special antiseptic means. So it will be possible to preserve the natural color of the material and exclude the impact of negative factors on it.