House of CIP panels: pros and cons, owner feedback, photo

The house of the SIP panels, the pros and cons of which will be discussed below, is a building that consists of a material created by the type of a sandwich.

Multilayered board

The slabs consist of three layers, as an external one, a fairly strong sheet is used. It is represented by an oriented chipboard, wooden boards, fiberboard or magnesite plates. The thickness of the sheets varies from 9 to 12 millimeters. Most often in SIP-panels for the construction of houses using OSP-3, the thickness of which is 12 millimeters.

general description

The house of CIP panels, the pros and cons of which should be considered before the beginning of construction, consists of a material collected from three layers. In the role of the central part is used a heater, namely polyurethane foam, mineral wool or expanded polystyrene. The thickness of the material can vary depending on the needs of the customer and varies from 50 to 250 millimeters. The most commonly used is polystyrene PSB-25 or PSB-S-25, whose density is 25 kg per cubic meter. The outer layers are connected to the core in the production process under the influence of high pressure. As a result, it is possible to obtain a strong composite material.

Positive characteristics

The house from the SIP panels, the pros and cons of which are presented in the article, has excellent thermal insulation qualities. This was achieved at the lowest cost if compared with other popular materials used in the construction of walls. This implies an equally important advantage, which is that such buildings are considered to be the largest in terms of floor space, which is true for the same type of development. While the rooms are cozy and very light. This is what most consumers like most of all. This effect was achieved due to the insignificant thickness of the walls. Because of the low heat capacity of the walls, such structures do not have to be heated for a long time. This is great news for those who prefer to spend the weekend outside the city. In such cases, you can not be afraid to turn off the heating during absence. Everything is relative. Thus, it will be much more difficult to warm up and heat a wooden or brick house. While the house made of self-supporting panels has a low thermal conductivity, it allows you to keep the heat in severe frosts.

Feedback on noise insulation and speed of construction

Modern owners of private houses within the city and apartments in multi-storey buildings note that they have to perform manipulations to combat extraneous and external noise. The described buildings have excellent noise-absorbing characteristics, as the owners of such housing note. This quality was achieved, despite the considerable thickness of the walls. Reviews of houses from SIP panels indicate that such buildings have ease, which is especially noticeable when compared with wooden, concrete and brick buildings. If you independently carry out the erection, you can save on the formation of the foundation, making it easy, shallow. There will not be an additional load on the base. As private developers emphasize, this feature is very attractive for them.

It is impossible not to note, as modern consumers claim, that SIP panels are very economical. Among other things, it's easy enough to work with them. In operation, this material also shows itself very well. If you decide to buy a house from the CIP panels, it is important to read the responses of the living. They can find information that construction and installation work does not involve large expenditures.

Possibility to save money

You do not have to rent special equipment, which allows you to save money. If you decide to do this work on your own, then you will have to stock up with just 3 or 5 people. It is not necessary to have special skills and abilities. The construction will take only 2 weeks. This makes buildings of this type very attractive for professional and private craftsmen.

Ecological and aesthetic appearance

If you want to build a house from CIP panels, the responses of those who live by you should be of interest. They show that the material is characterized by an ideal evenness. In the process of exploitation, it does not lose its merits and attractiveness. This indicates that there is no need to level the walls after the work. Thus, the finishing work is done at a minimum, whereas it is possible to start such manipulations immediately after the house is finished assembling. You can not be afraid of shrinkage processes, and in the course of construction you will manage an elementary set of materials and tools that almost every owner will have. Single-storey houses from SIP panels are assembled according to a technology that can not be called too dirty. At the same time, a minimum amount of harm to the landscape and ecology is applied. Among other things, you can start construction work at any time of the year.

Minuses

The house made of self-supporting panels is a combustible structure. Among the additional disadvantages of the material can be identified its attractiveness for rodents. This list is able to scare away and confuse the customer and the developer. However, as you know, any material contains many errors. You can recall even some materials that have more impressive side effects. Thus, if the walls are non-combustible, this does not at all indicate that ignition can not occur, since no building is insured against fire. This is due to the fact that the causes are not the material that underlies the construction, but many factors, including faulty wiring. If you decide to choose a house from the CIP panels, the pros and cons, feedback about this construction should be studied in advance. This will make it possible to find out that the wiring is arranged according to the rules that are applied in the construction of wooden houses. Thus, it must be open, which is not always liked by future owners. The problem with rodents, I must admit, is somewhat exaggerated with regard to CIP panels. This is due to the fact that animals are interested in a heater, which can not be said for the canvases that are used in the construction of walls.

Negative feedback

If in the near future you are going to buy a house from the CIP panels, the owners' feedback will be useful to know. They can be not only positive. Consumers note that they do not like the need for ventilation. This is due to the fact that the buildings are excessively sealed, and without the supply and exhaust ventilation system, it is quite uncomfortable to be present in the premises. Many say that after settling, despite the assurances of the builder in the absence of such need, it becomes necessary to install additional layers of soundproofing. You can feel and some vibration, which is noted when closing and opening windows, as well as doors. However, this seemingly negative feature may seem very subjective. If you read reviews about houses from CIP panels, then for sure pay attention to the feature that is the lack of the ability to make stitches in the material. When laying electrical wiring will need to use metal corrugations. If necessary, you can still work on the decoration of engineering and communication systems, but such manipulations will provide additional financial costs.

Durability

If you decide to build a house from CIP panels, the feedback of the owners will help you make the right decision. Many modern consumers pay attention to the insignificant durability of Canadian homes. Builders promise 50 years of operation. This factor directly depends on the quality of the materials used. If there is a desire to extend the life of the building, it will be necessary to carry out exterior decoration of the facade. At the same time, it is necessary to expect a significant increase in the cost of construction. But such costs pay off after a while.

So, we looked at the advantages and disadvantages of such a building as the house from the SIP panels. Pros and cons, photos presented in this material will help you make the right choice.