Good manual circular saw. How to choose a circular saw: tips and tricks

Previously, only a saw circular saw was seen on sawmills . What kind of model of such equipment to choose, today many private masters are thinking about. If you also decided to acquire such a device, it is important to consider the main characteristics, among which, for example, the power source.

Appointment

Most saws are powered by mains electricity, but commercially available battery analogs can be found. It is also important to decide what brand under which saw is produced, the most popular today can be called Makita, Bosch, DWT, Hitachi, but they will cost more than the Sturm, Sparky and Zenit models. If you also needed a hand-held circular saw, which one to choose, you must decide before you go shopping. This equipment is designed for convenient and rapid cutting of almost any soft material, namely wood, soft metal and plastic. As for the tree, it is possible to cut all the products from it, and to move the cutting element is permissible both along and across the fibers. All models of circulars provide the ability to cut at an angle of 45 degrees.

Tips on how to choose a saw: professional or household

A review of circular saws with reviews will allow you to understand which way to choose the choice. When buying the device described, you need to determine what this tool is for. If it is necessary to carry out construction work in a large volume, which involves the sawing of a parquet board and chipboard, then you should pay attention to professional models. If you do work on the au pair in rare cases, and most of the time the equipment lies in the pantry without any work, then it is advisable to buy a household circular.

Quite often, a manual circular saw is used for accurate and fast cutting. What you can choose from the products in the store, you can understand by reading the article. Thus, the difference between a professional and a household tool lies in the resource and performance of the engine. When manufacturing this or that kind of equipment, materials and parts of different quality are used. At a lower power, discs with less impressive diameters are used, which is why the device is able to cut the material to a shallower depth. A manual circular saw, the choice and reviews of which are presented in this article, can be household. In this case, the engine will have to allow you to relax from time to time, the equipment will need to be turned off for cooling.

An example of the use of household and professional tools

If you need a manual circular saw, which one to choose, you can solve it by reading the recommendations below. If you use a professional model, then for 1.5 hours of continuous work, you can saw such a number of blanks from the chipboard, which will be enough to build 4 cabinets. If you use the usual household model, then the same work will take 2 times more time. The quality will stay on top, but the cost of a professional tool will be 2 times higher.

Professional model selection: Makita 5103R

Quite often, during construction work, a manual circular saw is required. Advice on choosing it is recommended to read before making a purchase. The above model is a powerful saw that can be used for cutting large wood blanks and other materials. The model is designed for active operation, is characterized by high wear resistance and is characterized by a large set of functions that ensure safety during operation. How to choose a manual circular saw? Parameters are the decisive criterion. Below they will be discussed in more detail.

Technical characteristics of the model

One of the most important parameters is the power, which in this case is 2100 watts. The depth of the cut is 100 millimeters, and the rotation speed is equivalent to 3800 revolutions per minute. The size of the circle used is 270x30 millimeters, the weight of the device is 9.4 kilograms. For more comfortable operation, there is a soft start function that ensures the accuracy of the cutting. Safety is guaranteed by instantaneous engine shutdown due to the electronic brake.

The equipment is equipped with a solid and reliable cast aluminum support base. The operator will not face the problem of a jamming of the disc, since there is a wedging knife in the device. Safety in the operation of such tools is paramount, in this case it is provided by protecting against accidental starting, which became possible with a fuse switch.

Choosing a household saw: Einhell RT-CS 190/1

As the basic features the ergonomic handle acts, due to which even the beginner can cope with the instrument. Including also therefore the saw is most conveniently used at the decision of household tasks. The wizard will be able to easily replace the saw blade thanks to the key and the fixation of the spindle. You do not have to buy the key, as it is included in the package. Work with the equipment can be at home, as it is distinguished by low noise and vibration.

This reliable and inexpensive circular saw has a dust extraction device with a special adapter that connects to the vacuum cleaner. With this functionality, you can keep your workplace clean. The gears of the reducer are made of a material of increased hardness and strength, which is characterized by wear resistance and a long service life.

The manufacturer took care that the work was facilitated, it became possible also thanks to a practical cable clamp. Among other things, it eliminates the damage and curling of the cable. The disk size is 190x30 millimeters, the number of teeth is 24. At an angle of 90 degrees, the operator will be able to delve into the material by 66 millimeters, as for 45 degrees, the depth of the cut will be equivalent to 48 millimeters.

Recommendations for choosing a model depending on the engine power

Quite often in the process of repair or construction work, a circular manual saw is needed. What to choose, you decide after reading this article. The consumer must also take into account the fact that the tool can have an engine of different power. With higher parameters of the motor, the equipment will be able to cut material and high-density products in a short time. The operator will not experience any difficulties when cutting. A powerful engine is not afraid of even knots in the wood. But low-power circulars have a weighty advantage, which is expressed in light weight. Due to this, the tool can be moved from place to place. Thus, the models, whose power is 2000 watts and less, will weigh about 7 kilograms. If the saw is characterized by a power of 1200 watts, the weight will be reduced to 4 kilograms. Do you need a circular manual saw for household tasks? Which one to choose? Price - an important factor when buying. For private use, models from 1000 to 1200 watts are excellent. If the instrument is not used professionally, the capacity reserve will remain unclaimed. From this parameter will depend on the cost of the product, the difference in price can reach 100 or more percent.

Choice of model by price: Skil 5740 LA

This equipment, whose power is 700 watts, is characterized by 4300 rpm. The cost of the tool is 3,700 rubles, the landing diameter is 16 millimeters, the depth of the cut is 40 millimeters. If you need to perform a rectilinear neat cut in the tree of any breed, then you can use this model. Despite its modest characteristics, this equipment has other impressive advantages, including ergonomic design, comfortable handle, compactness and light weight - 2.4 kilograms. To prevent accidental start-up in the instrument, the power button lock is used. Increased stability is guaranteed by a metal wide support of a large size. To store the key there is a special compartment.

Reviews about the model Dewalt DW366

If you needed a circular manual saw, which one to choose, the reviews will be understood. Among the popular models can be identified the above, pay for which will have 9200 rubles. The price is due to high power, which is 1800 watts, and also impressive depth of cut - 60 millimeters. The landing diameter is equivalent to 16 millimeters, the maximum speed reaches 5000 per minute. This saw is a professional device and is designed for sawing wood to a depth of 60 millimeters.

The tool is characterized by a high level of security and easy management. The first feature is provided by a casing, which protects the user from chips and dust. Use this equipment is not only for professional purposes, but also in the suburban area, as well as a construction site or in a carpentry workshop.

According to users, this good manual circular saw is universal, as it can be used for sawing a tree of different density. Users especially like safety, it is expressed in reducing the risk of injury. The operator can change the range from 0 to 50 degrees during operation. Users emphasize that when using the equipment they get an excellent overview of the cutting line, since the design is ergonomic.

Overview of the characteristics of the saw with the battery

If you prefer autonomy, then it's best to choose a battery model, but it's worth it to be ready for less performance. Among other things, the speed of rotation will also be much lower than in electric circulars. Such models perfectly cope with wood of small thickness and low density. As practice shows, the battery charge may be enough for 30-50 minutes of operation, after which the battery will need to be charged. This can cause some inconvenience, since charging sometimes lasts up to 4 hours.

Overview of the features of a rechargeable saw Aeg BKS 18-0

Pay for the model will have 10 000 rubles. The equipment can be used in the conditions of de-energized buildings, which often refers to construction sites. The rotation speed is 5000 rpm, and the diameter of the circle used is 165 millimeters. The weight of the instrument is small and is equivalent to 3.2 kilograms. Among the features can be identified the adjustment of the angle of cut and the depth of cutting. The master will be able to quickly replace the disk. The instrument is equipped with a magnesium support sole, a charge level indicator, and a built-in backlight. The operator will be able to connect the vacuum cleaner to keep the workplace clean. During the operation it will be possible to use one or both hands at once.