Eccentric and belt grinding machines: application features

Each owner, who often carries out repairs, tries to acquire all the necessary tools and equipment. Belt grinding machines are considered one of the most common among electric tools. The design of such a device is not complicated. It consists of rollers, which are located on a special body. They put on an abrasive belt, which has a smooth surface on the inside, and it can slide well.

Belt grinding machines are used for processing large enough areas. The device can remove old finishing coatings, smooth the surface of the product. In addition, the machine performs a finer processing: for this you only need to take the skin with small grains. Such an aggregate most often grinds wood, although its use for ceramics and even metal is not ruled out. The only drawback of the tool is the impossibility of processing complex surfaces, corners.

Belt grinding machines should be selected carefully. To begin with, you need to determine the purpose for which you need a tool, how often you will use it. During the selection, pay attention to the feed speed of the belt: it must be adjusted. It is desirable to choose such an aggregate that will be equipped with a smooth descent. In this case, the engine will last much longer. It's good if the machine is equipped with a dust bag or it will have a hole to which you can connect a vacuum cleaner. Such an element will allow to extend the service life of the tape, as well as ensure a clean work.

Belt grinding machines perform a small number of functions, however without them it is sometimes very difficult to manage. For example, you can not polish a large room by hand. In addition, there are other devices that are capable of performing more delicate work. For example, orbital machines for grinding can achieve an ideal result. The fact is that the canvas is moving along a complex trajectory.

Eccentric grinders work very efficiently. The canvas can move at a speed of several thousand revolutions per minute. As the unit is subjected to strong vibration during operation, it must be equipped with a counterweight. It is good if the unit is designed to connect a vacuum cleaner or a special dust bag. The fact is that during work, very small debris appears, which it is difficult to assemble with a usual broom. Especially when inhaled, it can harm your health.

For home use does not require a machine of high power. During the selection, attention should be paid to the size of the sole. This parameter depends on the required performance of the machine. The eccentric grinder can be equipped with additional functions: smooth start-up, adjustment of the rotational frequency, brake of the sole.

The only drawback of this tool is the impossibility of processing corners. With the help of such an aggregate it is possible to process various materials: plastic, metal, wood.