Correct glue for plywood - the key to successful repair

If you decide to repair, then you need to approach this process with all possible care. It would seem that the difficult in laying parquet, because just something you want to put one plate after another, a layer of plywood behind the layer? However, in fact it turns out that if you incorrectly choose glue for plywood, then you will soon start refurbishment. So let's see what kind of glue there is.

Aqueous or water-dispersive

This compound is very popular, because its couples are absolutely harmless and do not damage human health. In addition, this glue for parquet and plywood does not have a sharp odor, so no one will definitely get a headache from him. Nevertheless, he also has significant shortcomings. For example, it is not suitable for such sensitive wood species as apple, pear, cherry and beech, because its use leads to deformation and wetting of parquet plates, and then to rotting wood. And here for a parquet from an oak this glue for plywood, most likely, will approach ideally! However, remember that using a composition of this type, the use of dowels-nails is mandatory. And carefully read the instructions before using glue for water-based plywood, since it usually indicates the maximum and minimum calculated thickness of the parquet, as well as the species of wood for which it is intended. The main drawback of this method of laying parquet is the long drying of the glue.

Based on solvent

If you need to complete the repair faster, then it's best for you to stop on this type of compound, because its complete drying comes in 5 days. In addition, if you need glue for plywood, for example, from beech, then a product based on solvents is your salvation. And the disadvantages of such glue are a sharp smell and the need to use a special primer. And be sure to observe all fire safety measures when laying parquet, because the composition is extremely flammable! In addition, it is best to choose organic solvents, because they are much safer for human health.

Reactive or two-component

As the name suggests, this glue for plywood is suitable for every occasion of life. It is suitable for parquet from any kind of wood, the binding is three times more durable, and you can start grinding in two days. However, they also have their own shortcomings, which hinder their wide application. The most important is that they contain components harmful to the human body and the environment.

However, they are dangerous only until the glue hardens, so be sure to use protective equipment when working with them. Nevertheless, in their harmlessness, not all believe, so they are usually used only when the use of another glue is ineffective. Although, perhaps today, if you understand this, it is possible to choose a two-component version, which, despite its inorganic composition, is harmless to human health, while observing all the necessary precautions.