Bosch MFW 45020 electric grinder: reviews, descriptions, specifications, owner manual

The segment of household appliances for the kitchen has always been and remains one of the main sites for the introduction of advanced technologies. Microwave ovens, refrigerators, dishwashers, mixers and many other devices are consistently in high demand among housewives, motivating manufacturers to improve their products. In this respect, the Bosch MFW 45020 mincer deserves special attention . Feedback about this model indicates that the developers managed to give it a good performance, and also to increase the basic quality of the device.

The German manufacturer used high-quality components, supporting the structure with a reliable body. Nevertheless, any technique that is operated under difficult conditions, can last a long time only if the manufacturer's instructions are followed. Taking into account these recommendations, and also being guided by the opinions of the direct owners of this model, it can be concluded that it is worthwhile to purchase it and to increase the efficiency in the process of use.

General information about grinder

The model is a kind of household electric meat grinder of medium power. When it was created, the manufacturer not only took into account the trend of technological fashion, but introduced the best practices of traditional trends in the production of kitchen appliances. As a result, the Bosch electric grinder has got a familiar look and familiar controls. In terms of performance, a significant breakthrough was also not made, although this parameter should not be considered as the most significant one.

Users are increasingly focusing on the quality of work, rather than on power capacity. That is, an average housewife, rather, requires a reliable aggregate of average power, rather than a high-performance machine, which regularly brings up during operation. So, the model MFW 45020 belongs to the first category. Of course, in the process of long-term operation and the owners of this device have to look for spare parts for meat mincers to replace the out of order. But the regularity of such operations in the case of Bosch is not as high as when working with most competitors.

Specifications

In the market you can find many models with higher performance, but in this case the stability of the device allows you to cope with almost all the domestic operations that are assigned to the meat grinders. So, the Bosch kitchen grinder in the MFW 45020 series has the following characteristics:

• Dimensions - 400 mm in length, 285 mm in width and 283 in height.
• The power of the device is 500W.
• The power, provided that the shaft is blocked, is 1 600 W.
• Performance - per minute allows you to cook 2.7 kg of stuffing.
• Number of nozzles - 3 pieces, among which a syringe for sausages.
• The reverse function is available.
• Housing material - plastic base.
• Warranty - 12 months.

As can be seen, at a high speed of operation the model makes it possible to process about three kilograms of products. This potential is close to professional meat grinders, although in households, many ordinary users are increasingly putting such high demands on productivity. But it is important not to forget that for domestic models, intensive operating modes increase the risk of breakage. In turn, the safety clutch of the Bosch grinder provides reliable protection against the combustion of the device, enhancing both its maintainability and the service life.

Model Construction

The meat grinder is made in a classical style and does not look particularly exotic. Is that the absence of a cord can cause suspicion. For him in the niche of the case there is a special compartment - one of ergonomic raisins "Bosch". The dimensions of the device can be estimated as standard, but rather close to the models "compact". Although at the height of the designers could not save. But also it is quite good, as the high meat grinder Bosch MFW 45020, reviews about which nevertheless mark the economy of space, is conveniently located on the cutting tables and placed in the lockers in the kitchen.

The material for the case is plastic. This is also a standard solution, which makes it easy to clean the surface of the device and facilitate its weight. Continuing the theme of ergonomic advantages, it is possible to note the presence of a capacious tray for meat and a convenient pusher. It provides for grooves for finger grasping, which increases the comfort of operation of the meat grinder. The body also has rubber feet to prevent slipping, and a handle for carrying the unit. Assembly and disassembly of the device, as a rule, do not cause problems. So, if you need to clean the auger for the meat grinder, then the user will need only a few simple manipulations. After that, just press the special lever to fix the device.

Internal organization

All the main advantages of this technique are enclosed in a meat grinder. Its body is made of aluminum high-strength alloy, but users more appreciate it for the absence of sharp edges and burrs - metal processing is impeccable. A feature of the neck of this camera is its displacement relative to the center. Unfortunately, the design features in this model - a rare phenomenon, but this deviation from the standards is worth a lot. In the process of work, the shift of the neck facilitates the rapid entry of pieces of meat into the screw for the meat grinder, which increases the processing speed. There is one more small difference from the classical units, although it has long been used by advanced producers of kitchen grinders. Throughout the device's camera, you can notice the presence of special protrusions - they also help to efficiently grind food during their movement in the compartment.

Many will be surprised and familiarity with the pusher, which performs a dual function. In addition to its basic task, it also acts as a container for attachments. It would seem nothing special, but such trifles will be very pleasant in the process of work. But there is a lack of a pusher and a disadvantage - water at its washing sometimes gets inside, because of what it is necessary to put rubber gaskets between its cover and the case.

Instructions for working with a meat grinder

You can start work only if the meat grinder is installed on a flat surface. Further, the power cord is pulled out and straightened out - it is necessary to leave only the length required for free connection of the device. The prepared nozzle is put on the drive and rotated upwards for the final fixation. After the loading tray has been inserted and the Bosch grinder hose is securely fixed, you can connect the mains plug. Also at this point, depending on the volume of the planned processing, the corresponding dishes should be prepared for collecting minced meat. In the course of work, only the pusher should be used.

Despite the high power of the device, it is possible to get stuck in the screw. As a rule, there is a blocking of the motor, after which it is necessary to eliminate it by switching on the reverse direction of the unit operation. When the work is completed, you should wait for the engine to stop completely and start disassembling. Then the following parts are extracted: a pusher, a tray, a screw auger for a Bosch mincer, a nozzle and other elements.

Cleaning the meat grinder

This procedure must be carried out with all working elements of the device after each measure for the grinding of products. To do this, wait until the appliance is shut down and remove the plug from the mains. Then wipe all external surfaces of the device with a damp cloth. For the effectiveness of the procedure, you should initially purchase detergents, taking into account the materials from which the Bosch MFW 45020 mincer is made. The reviews note that the body plastic is washed easily, although it can be scratched by abrasives. With regard to metal elements, the situation is more complicated. At this stage, manufacturers can not yet produce cutting elements coated with corrosion. Therefore, this protection should be provided manually during each cleaning. For example, an edible oil with an anti-rust effect is suitable. It is recommended that after initial cleaning, apply to the auger, the metal surfaces of the chamber, the nozzles and other elements that may be susceptible to rust.

Spare parts and repair

If we consider the most common problems in the operation of this meat grinder, then jams and arbitrary shutdown of the device will come to the fore. Actually, in both cases it is necessary to act according to one scheme. First, the device turns off, then the cable is removed from the network. Next, you need to disassemble the device in order to remove the product particles that could have caused the problem. Professional repair of the Bosch grinder may be required if one of the working elements has been deformed. By the way, most often there are breakages of bushes, screws and knives. And this applies to all meat grinders, and the German model is no exception.

As for knives, it is present in the kit in the singular. Again, this part breaks less often than in other devices due to high quality. The knife is cast, and this significantly reduces the likelihood of its deformation. Screw, in turn, is made of two alloys - aluminum and steel. The transition sleeve for the Bosch mincer is also made of metal. This solution increases the reliability of the model in comparison with other devices in the design of which plastic parts are still used.

Positive feedback on the meat grinder

Using the example of this mincer, the developers of "Bosch" once again confirmed their deserved status as a reliable producer. Users praise the model from different sides - from performance to ergonomics. Among the obvious advantages is the use of high-quality materials with the Bosch MFW 45020 mincer. The reviews positively characterize not only the work of metal parts in the chamber, but also the plastic housing. The company did not completely abandon the plastic, using its advantages as an easy and practical material.

However, the greatest number of laudatory opinions the owners say about ergonomics. The presence of molds, compartments and niches for storage of auxiliary and additional accessories of the meat grinder increases the convenience of its operation. At the same time, the creators thought not only about comfort, but also about security. Although there is also criticism about the effectiveness of handling "problematic" products, such a situation smoothes the safety clutch of the Bosch mincer, thanks to which it is possible to save the device itself, and save time for fixing the problem.

Negative feedback on the meat grinder

If we compare the model with analogs or even competitors of the same class, the shortcomings marked by the owners will be insignificant. Start their review with functionality. Indeed, the manufacturer went on the path of conservatism, which allowed the release of a quality model, but with modest capabilities. For example, many housewives note that the Bosch electric grinder is not capable of providing the grater function and shredding at a modern level. Also, with all the advantages of assembly and assembly, many are upset by a small number of attachments, although flawlessly executed.

Ambiguous opinions about the noise of the device. The fact that the vibration effect is minimized by means of rubber feet is obvious, but noise insulation is still not the strong side of the device. Well, in addition, it is worth noting the high cost. Similar functionality and performance have long become mandatory in the characteristics of models for 3-5 thousand rubles. What is better than the Bosch MFW 45020 mincer, whose average price is 6-7 thousand rubles? Of course, there is a serious bonus in the form of German quality, but in that case, you can pay a few more thousands and get in all senses a first-class meat grinder.

Conclusion

The main thing that MFW 45020 characterizes is the ergonomics, acceptable performance and high service life of the parts. For the most part, connoisseurs of kitchen appliances are guided precisely by these indicators. A complex but comfortable design will ensure ease in the process of work, the power potential will allow to cope even with frozen minced meat, and the durability of parts will delay the time when it will be necessary to look for new spare parts for meat grinders from Bosch. Of course, those who track high-tech and advanced innovations in this segment, this model is unlikely to be interested. It is rather a practical and reliable technique. As for the cost, then, again, you have to pay for the quality, tested for years. After all, if you expand the functionality of a competitor similar in level, then the price tag will not be 6-7, but all 10 thousand rubles.