HomelinessBuilding

Cold shower - just add water

The time spent on the countryside is always active, because it is there that we rest from the city bustle, doing garden, garden or just sunbathing in the sun. And only a garden shower makes it possible to relieve the slight fatigue of country cottages.

You can, of course, rinse and bucket, but this is not a way out. You can install a cold shower at the dacha in two ways. The first is to get it ready. To date, the market provides a large selection. And the second option is to build a cold shower with your own hands. Below we dwell on these two options.

When choosing a ready design, you should pay attention to the pedal shower, as it is considered one of the most practical and relatively cheap options. A cold shower in this version has a small weight, which is why it is very convenient to transport. The only drawback of this model is that you have to press the pedal in order to wash yourself. But the cost of it will please you very much.

A good option will be the purchase of a shower cubicle, the manufacturers of which are more than enough. But whatever the manufacturer, the composition of the kit is always the same - the details of the design of the cabin itself and the tank (tank) for water. The installation of the shower enclosure is very simple, for this it is only necessary to thoroughly study the installation instructions that are attached to it. They exist both with forced heating (from electricity), and without it (a cold shower). In comparison with the pedal shower, the price of the cabin is much greater, and if you purchase it with electric heating, the cost will increase several times.

Shower cottage, as mentioned above, you can build your own hands. To do this you will need a little time and some building material.

The first step is to determine the location of the shower, as well as the type of material from which it will be built. For its erection, wood, slate is used. Of course, you can make a more reliable construction with the use of concrete, brick, etc. Choosing a place, you need to take into account the basic requirements for it. This lack of draft, a certain distance from the country house, in addition, the shower should be on the sunny side.

The next question to be solved when building a cold shower is a drain. It can be independent, that is, through the holes in the floor structure water will be absorbed into the ground. But, as a rule, a separate ditch is made, which is closed by a sink pit. Then choose the tank. It should be black in color and have a capacity of 200 liters.

When building a cabin, you need to remember that it should be quite spacious. First of all, we construct a framework of a structure, after which we sew it with any available material. The tank is installed on wooden bars. You can use a more durable material, such as an iron corner, etc.

As you can see, there are many options for installing a shower in the country. It all depends on your desire and your financial capabilities.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.atomiyme.com. Theme powered by WordPress.