Building materials for cottages: concrete M100 and mortar M100

In modern construction, a huge number of different materials are used. Some of them appeared recently, for example, foam blocks and porous bricks, and some were known for more than a thousand years and were used in the construction of many buildings, for example, the same concrete, mortar or ordinary building mix.

Planning the arrangement of a private house, sometimes you do not even know what will suit better and what Stop your choice. In this article we will tell you in detail about the features of such popular materials as M100 concrete and M100 mortar, about how they differ from others and where they can be used.

By the way, do you know what the M100 parameter means? This designation is a fairly common brand. In addition to concrete and mortar, one can also find brick M100 and even M100 fuel oil, which is used as fuel for various installations and vehicles.

In building materials, the M100 grade means a degree of strength that allows a load of 100 kilograms per square centimeter. Of course, if you want, you can use the brand M300 or even the M500, but what's the point of overpaying? If the building is not higher than 2-3 floors, the M100 brand will be enough.

Concrete M100

This brand is popular and widely used for various construction works. It has the simplest composition, which of course, has a beneficial effect on its price. However, it should be remembered that its strength indicators are also low and this material can be used only where the load does not exceed the limit levels for a given brand.

Concrete M100 is most often used in preparatory work to create a foundation base. It is also used in the construction of roads in the role of the underlying basis, especially if such a road does not plan too much traffic. It is excellent for installing curbs, gutters, blinds, treads, sidewalks, pedestrian paths, that is, for concreting any non-structural structures.

Concrete M100 is often called skinny. The name is explained by the fact that it contains the minimum permissible amount of cement, which is responsible for the connection of all the elements of the aggregate. The mixture is made using lime or gravel crushed stone or granite filler. The ratio of rubble, sand and cement for this brand of concrete is 7: 4.6: 1.

Solution M100

This is a cement-sand building mix, which is intended for plaster bases. For its production, the best grades of cement M300 and M400 are used, and clay with lime acts as additives. With this solution, different surfaces are lined. It is good to use to remove defects and irregularities. This mixture is also widely used for sealing intertitic joints and for laying ceramic, gypsum and other types of tiles. Sometimes it is used for cement floor screed .

What is better to use, mortar or concrete?

If the brand of these building materials is the same, then their strength will be the same. However, if you take into account such a parameter as wear resistance, then from this point of view the concrete will be better, since the solution in this indicator is inferior to it approximately three times. However, there is no large aggregate in the solution, gravel, and therefore in some cases it will nevertheless be better. As you can see, everything depends on the specifics of the work, and therefore the choice depends on the specific situation.