Assembly of the cabinet-compartment: instruction and diagram. How to properly assemble a wardrobe?

The cabinet-cupboard takes a step of the leader in the domestic market among furniture of various configurations. Thanks to him free space is spent sparingly, it fits perfectly even in a small room. Despite the fact that the wardrobes are compact in size, they are quite roomy. In addition, they are multifunctional and have a long service life when properly assembled.

Process of preparation

In order to be easier to navigate in the matter of how to collect furniture, complete with the elements always includes an instruction. The layout of the cabinet-compartment includes information about the stages of work, the name and the number of parts and elements. When buying a cabinet, it is also necessary to check the quality of each component part: laths, fasteners. You need to make sure that there are no different types of defects on the furniture - blisters, cracks, chips. When transporting the furniture set, it is recommended to observe precautions, for example, poorly fixed furniture can fall and break.

Tools for assembling a wardrobe

To ensure that the furniture has served its owner as long as possible, it must be properly completed. Any assemblage of a case-compartment (the instruction and the scheme will help us in it) will not do without use of some tools. Here are the main ones:

1. Building level and measuring tape.
2. Drill or perforator.
3. Screwdriver.
4. Hacksaw.
5. A hammer.
6. Pencil.
7. Self-tapping screws and dowels.

Select the installation location. Layout

First of all, you need to decide on where the purchased furniture will be located. Before you will be assembling the cabinet (corner compartment), it is important to take into account all the nuances and details of placement. When planning the installation of furniture in the corner of the room, keep in mind that it is from the angle that the total length is measured. To determine this value, the size of the mezzanine is removed. Next, draw a vertical line, which will be the display of the boundaries of the future cabinet. In order for the line to be even, you need to make a few labels, and then connect them.

For a long service life of furniture requires a high-quality assembly of the doors of the wardrobe. Instructions for this work are needed. Next, you need to decide where the bar separating the items for things with horizontal shelves and the place where the clothes hangers will be placed will be located. To determine these areas, you need to measure the perimeter of the future ceiling of the cabinet and measure the necessary distance from the edge of the structure. On two vertically arranged lines, the height of the shelves, the size of the edge of the structure and the vertical stand are marked.

Mounting of fastenings for a case-compartment

Modern furniture manufacturers suggest that an action plan is needed for such a difficult business as assembling a wardrobe. The instruction is enclosed with each piece of furniture. Only after all step-by-step steps are understood with understanding, it is possible to start installing the fasteners for the sliding door wardrobe.

To the pre-drawn lines, attach fasteners and mark the place for future holes, where later it will be necessary to hammer the dowels.

Fastening of the elements of the cabinet

Since the cabinet is assembled independently, without the involvement of professionals, it is necessary that before the eyes there is always a scheme of assembling the cabinet-compartment in order to avoid possible errors.

The vertical rack is fixed with screws to the fasteners. Before setting up the mezzanine, draw a line with a pencil in the place where it will be located. On this feature holes are drilled, self-tapping screws and dowels are clogged in them, then a fastening is mounted on them. Any assembly of the cabinet-compartment, the instruction of which describes in great detail the whole process that is happening, implies the installation of mezzanines. It is fixed and fixed with screws. Then you can proceed to install the side panel. For this, it is necessary to measure the distance from the floor to the ceiling as accurately as possible. The sidewall is fitted to the size of the main structure and securely fastened. On it and a vertical rack marks are made, in the marked places 2 fastenings are mounted. After that, the shelves are fixed and fixed with screws.

Since it is not always possible to properly assemble a wardrobe, it is necessary to approach this process with all seriousness and responsibility. Where there will be a wardrobe or a place where there will be hangers, you need to hang a pipe. She will be clinging to her hangers with clothes. The pipe is cut to a certain size and installed on the fasteners, which were made in advance. The next step is the markup. The fixing points on the wall surface are marked with a pencil. Each hole is drilled with a hole in which the plug is clogged. Then the panels are fixed with screws in the marked places.

Assembling the doors of the wardrobe

When the basic design of the cabinet is fixed, you can proceed to such an immediate process as assembling the doors of a sliding cabinet, the installation instruction of which is step-by-step painted. It is necessary to adjust the length of the guides to the appropriate size. The slats are fixed to the false panels on the floor and ceiling with the help of screws. Each cabinet model has the principle of a sliding door system, but furniture from different manufacturers has its own individual characteristics. It is desirable to choose a system that does not require the installation of special equipment. You can order doors in the furniture factory, then you will not need to cut the material further and adjust the sheets to fit. How to assemble the doors of the closet yourself? Algorithm of actions:

1. Secure the rails to the finished door. Their rollers are undesirable to tighten very tightly and tightly, since they must move freely.
2. Alternately insert the door into the lower and upper guides.
3. To ensure that the doors open noiselessly, after adjusting them for the angle and height of the slope on the sides of the sliding cloth, you can paste the pile.

Next, check the operation of the door. It should be easy to close and open, there should be no strangers and creaky sounds, the fittings must be securely fixed.

Kinds of sliding-door wardrobes

Before you choose a wardrobe, you need to decide on his model. Some prefer the built-in view, others - full-size. The first model is a design that is built into a free space. The only drawback of this type is the impossibility of moving. The second type is a custom-made chiffoner. And the assembling of the cabinet-compartment (the instruction must necessarily be applied) is carried out either by the buyers themselves or by specialists.

In conclusion, it can be concluded that if there is a niche in the room, then this place can not be better suited for arranging a built-in closet. After all, save space, it will save your money.