Septic Tver: owner feedback, installation and maintenance

If you are the owner of a country house, then for sure you had to decide how to clean and dispose of the sewage coming from the apartment house. To this end, devices such as septic tanks are used that remove 98% of the water from the water. This indicator is sufficient for the water to be discharged into the nearest gutters, without polluting the environment and posing no danger to human health.

The most adapted today for environmental conditions are the treatment facilities that are manufactured by Russian companies. Among them it is necessary to allocate a septic tank "Tver", owner feedback about which you can read below. However, before acquiring it is necessary to get acquainted with the opinion of consumers, and also to ask how installation and maintenance of such devices are carried out.

Feedback on the device and the principle of operation

According to users, the cleaning device of the brand "Tver" has 6 compartments. The first of them serves to receive polluted water. At the bottom of this chamber, heavy particles are deposited. Then follows the bioreactor, where it is difficult to oxidize elements into the lungs.

The first stage of purification involves the passage of an aeration tank with sewage. In this compartment, the liquid mixes with the sludge, and the reaction itself takes place under the influence of oxygen. Substances oxidize the contamination, and then they enter the secondary settling tank, from where the sludge returns to the 3 compartment, while the clarified and purified water goes further. Users especially emphasize that the system assumes the presence of a second aeration tank, where the conversion of effluents occurs due to a layer of limestone that lies on the bottom. The substance removes phosphates from the liquid, binding the small elements and large particles.

The third settler is the last stage of purification, if desired, users can put into it chlorine-containing tablets, which will carry out the last stage of purification. The first impurity chamber is supplied by a pump or gravity flow. Purified water is discharged into a roadside ditch or pond, it can be collected in a sump for re-use. According to the buyers, the septic tank "Tver", owners' feedback about which it will be useful to know the future consumer, should work under the control of a person. You will need to monitor the amount of beneficial bacteria in the compartments.

Feedback on the principle of work

The septic tank described in the article refers to classical treatment facilities that use gravity sedimentation, anaerobic fermentation, and biological purification. Users emphasize that gravity settling is the separation of waste water into small fractions. This stage is based on the weight of substances.

Anaerobic fermentation is carried out through the interaction of special bacteria and impurities. As for biological treatment, it is carried out by supplying oxygen to the compartment. Consumers note that when installing the septic tank, it is important to correctly calculate the overflow system, so that the fluid between the chambers moves without the use of pumps.

Installation

The septic tank "Tver", whose owners' feedback will be useful to each consumer, should be installed according to a specific instruction, it is supplied with the device and describes in detail the installation work. For carrying out the manipulations it will be necessary to prepare dry cement and sand. Among other things, it is important to supply power.

The installation work can be carried out by the customer independently or with the involvement of specialists. Before installation, the excavation is excavated, the dimensions of which should be somewhat larger than the dimensions of the device itself. At the bottom is arranged a sand cushion, which is well tamped and spilled with water. At the next stage, you can install a septic tank "Tver", reviews of owners about which often only positive. It is important to anchor the equipment, giving the device a stable position at any time of the year. As a rule, anchors are supplied in the kit. Next, the aseptic is connected to the outgoing and incoming pipes and the power supply.

It is important for the master to check the operability of the equipment. More than half of the septic tank should be covered with a mixture of cement and sand to prevent damage to the shell during periods of autumn and spring soil movements. The upper part of the septic tank is insulated, for which purpose any material of the mineral wool type should be used. At the final stage, the structure is filled with soil, it can be assumed that the installation of the septic tank is completed. The described septic tank in a private house should be installed strictly horizontally, since even a small misalignment during installation can lead to incorrect operation of the device.

Carrying out of service

These works consist in regular preventive manipulation and cleaning of equipment. At the same time, excess amount of sludge is removed from the chambers, for this purpose it is necessary to use fecal pumps or special equipment. Usually the sludge is used as a fertilizer. Cleaning the filters in the bioreactor is also necessary. They can be easily removed and rinsed with running water. After that, the filters must be installed in place.

It also happens that the beams rot. They serve to support filters. This requires a complete replacement of metal elements. When servicing the septic tank, it is necessary to replenish limestone and bacteria. A septic tank in a private home should be subjected to preventive examinations approximately once every 2.5 years, depending on the intensity of use of the equipment.

Cleaning

Before a complete cleaning, you should ask how such work is carried out. For this, it is necessary to prepare a sewage treatment plant and a fecal pump. It will take a high pressure washer. In the first stage, remove the top cover from the equipment. This will provide access to the three cranes that are located inside the device. The cranes in the working position must be closed, while the middle ones are open. Through it oxygen is supplied to the compartment.

For pumping silt from adjacent compartments, it is necessary to close the middle tap and open alternately the extreme ones. The average operating time of one tap is approximately 15-20 minutes. After the completion of this procedure, or from the adjacent compartments should go to the central, from there, it must be removed using a machine or pump.

Recommendations for cleaning up

The septic tank "Tver", the cleaning instruction of which is presented in the article, should be cleaned from time to time. In the next step, it is necessary to remove the ruffle filters from the bioreactor, which are washed well. Supporting metal elements are replaced, if necessary. Using a high pressure washer, the walls of the device can be washed. The excess fluid is then removed by means of a pump.

Once the equipment has been cleaned, it can be installed in place. Master carries out filling of limestone and bacteria. At the final stage, the middle tap should be opened and the lid closed. To complete the cleaning, the device should be used about once every 6 years.

Positive reviews

The septic tank "Tver", the manufacturer of which is located in Russia, has many advantages. Among the positive features are:

• The possibility of complete sewage treatment ;
• Use of high-strength materials;
• Reliability of the elements of the treatment plant;
• Energy saving during operation.

According to the buyers, during the septic operation there is no need to use filtering devices. In addition, you can count on a half-century trouble-free operation of the device. The manufacturer guarantees the operability of the unit for 50 years. This is true if the equipment is properly serviced by the consumer. An additional advantage is the fact that the design is designed for multiple multiple wastewater discharges.

Main disadvantages

The septic tank "Tver", the disadvantages of which will be presented below, still remains popular among consumers. But before buying such equipment, it is necessary to pay attention to the fact that it is quite expensive, and also requires the need for anchoring. The latter is due to the insignificant weight of the equipment. Considering the negative aspects, it is impossible not to mention the energy dependence of the complex, which does not always suit the residents, whose houses are not supplied with electricity.

Reviews about some modifications of the sepic "Tver"

The septic tank "Tver", the price with the turnkey installation of which is mentioned in the article, can be submitted for sale in a variety of 0.75P. According to buyers, the performance of this device is 0, 75 m ³ per day. The body is made of polypropylene, and the maximum volley discharge reaches a volume of 250 liters.

Consumers emphasize that this equipment can be used as an additional cleaning device for a bath or a guest house. If the amount of sewage from your house is somewhat larger, then you can consider the model 1P, which in a day is capable of taking 1 m ^{3 of} sewage. The maximum volley discharge is 330 liters, this model, according to users, it is preferable to consider as a variant of the station for a family of three people.

Septic Tver, the price with a turn-key installation of which should interest the consumer, is also offered varieties of 1.5P. According to users, the performance in this case is 1.5 m ³ per day. You can count on the maximum possible salvo discharge in the volume of 500 liters. If there is a need to serve two houses at once, then you can prefer model 2P, which can clear 2 m ^{3 of} water per day. The salvo single discharge is 650 liters.

Dimensions and cost of the septic tank "Tver"

The septic tank "Tver", the size of which can vary, has a different value. For example, if you select a model whose length, width and height are 1.4x1.1x1.72 m, then you will have to pay 59 000 rubles for it. The productivity per day will be 0.35 m ³ . If the dimensions change to 1.65x1.1x1.67 m, the price will be 69 000 rubles. The productivity in this case increases to 0.5 m ³ . The septic tank "Tver", whose price is 76,900 rubles, has the following dimensions: 2х1.1х1.67 m. The output remains the same as in the above-described case. If the house is quite large and the number of people living in it can change in the larger direction, then you should choose a model whose dimensions are equal to 2.25x0.86x1.72 m. At the same time, the productivity will be 0.75 m ³ per day.

The cost of installing the septic tank "Tver"

Maintenance of the septic tank "Tver" will need to be carried out periodically. This should be taken into account even before the purchase of such equipment, as well as the cost of installation work. The price for these services will vary depending on the season, so it is necessary to think about carrying out such work in advance so that when summer comes, it will not be in a country house without a cleaning system.

If you purchased a septic tank "Tver 0,35P", then you can install it using the technology of supervision installation, for these data the consumer will have to pay 9300 rubles. Installation of the septic tank "Tver" can be conducted in the sand, at the same time the price will be 21 500 rubles, as well as installation in the loam. If the installation works will be carried out in clay, the cost increases to 24 100 rubles. But installation in quicksand is the most expensive, the price for this work is 30 550 rubles.

Buying a septic tank "Tver 0,75P", you will pay for installation supervision exactly the same as in the above-described case, but installation works in sand and loam will cost more - at 22,800 rubles. If the installation will be carried out in clay, then the work of specialists will cost 25,400 rubles. When installing in quicksand, the cost of manipulation will be 31,900 rubles.

What septic tank to choose

If you are installing an autonomous sewer in a private home, how to choose such a system is important to know even before shopping. In order to make the right choice, it is necessary to consider the main advantages and disadvantages of existing models of sewage treatment plants on the market. For example, the "Tank" septic tank has a low cost, it copes well with sewage cleaning, provides autonomous operation and is easy to maintain. At its work there will be no operational power inputs.

On sale you can find another septic tank - "Unilos", which is highly efficient, but depends on electricity. This system consumers do not choose so often because the price of equipment "bites".

A modern dacha owner needs an autonomous sewage system in a private house. How to choose a similar system, you can solve by reading this article. From it you will learn that "Triton" has a low cost and is easy to operate. This device has compact dimensions, which facilitates not only installation, but also delivery. The result of cleaning can be called full, and its degree is not inferior to the effect of using more expensive systems.

Conclusion

If you will consider the scheme of the septic tank, which was discussed above, you will be able to become more familiar with the principle of operation of this device. This information will allow you to understand how to better clean the device, as well as what technique to use and in what order to operate.

This wastewater treatment plant is unique in that it can be used for families with a total population of 15 people. In this case, you can count on the maximum possible volley discharge in the volume of 800 liters. At the same time, installation of the equipment can be carried out independently. The septic circuit allows us to understand that this system consists of 6 compartments, each of which is designed to perform its function.