Anti-gravel films for car protection: advantages, special features, reviews

Mechanical wear is unavoidable for any vehicle. Particularly prone to adverse effects paint and varnish. There may be scratches and chips. Anti-gravel films will effectively prevent this.

Characteristics

High quality products are almost impossible to see on the surface. In doing so, they provide maximum strength. Thanks to the film, it is possible to preserve the natural color of the paintwork. The elements of graphic design applied on the body last longer.

Anti-gravel films have flexibility, which meets the requirements of modern manufacturers. The coating perfectly repeats even the most complex contours. Today, the market can detect modifications that can last more than one year.

From what do these products protect the vehicle? It:

• mechanical damage;
• Cracks and chips;
• chemical substances.

All these factors contribute to the formation of corrosion. Sometimes it is more difficult to cope with it than with the phenomena described above.

Russian roads are unlikely to boast of proper quality. They are full of bumps and pits. Asphalt is cracking. In the end, it is divided into small particles. During the ride, they fly out from under the wheels of the vehicles ahead. The car's surface is damaged.

The problem is solved in several ways. Let's say a motorist can regularly go for painting, but this pleasure is not cheap. Another option involves the repair of roads. It is also difficult to implement because of the large scale of the work.

It remains only the most practical and cheap solution - anti-gravel film. They are available to most car owners.

Compared with alternative ways of protecting the machine, the described product has an acceptable price. In addition to minor damage, it protects the vehicle from:

• Insects;
• Harmful reagents;
• Small collisions and their consequences.

Composition

Anti-gravel films are made of special material. It is based on polyvinyl chloride and polyurethane. Experts recommend using the product for the front of the car. It is also suitable for headlights, fog lights and thresholds. Due to its transparent structure it can be matched for a body of any color.

Selection of quality products

The main criterion of quality is the thickness. The bigger it is, the stronger the film. The propagation was modified, in which this figure is from 100 to 200 microns. Its characteristics provide reliable protection. It is easily applied and serves for a long time, up to 7 years.

If the transparent film is applied to the headlights, it is advisable to change it at least once every few years. It provides them with a new look. Light characteristics also do not suffer.

The trend of the season is the anti-gravel polyurethane film. Its thickness varies between 150-200 microns. This coating is recommended for use if the driver has to travel in difficult conditions. A good film and in the event that you need to cover only the headlights or thresholds.

Please note that this modification is slightly more expensive. Vinyl films, for example, will be cheaper. But you do not need to save on the price. Do not spare money now, and you can avoid costs for varnishing, painting and polishing in the future.

Cheap modifications of anti-gravel film cost 900-1000 rubles. For running meter. In case of a wholesale order, some companies provide impressive discounts. As a result, you can buy materials at a price of up to 400-500 rubles per meter.

"Golden middle" can be called products worth 2-3 thousand per meter. More expensive types of films will cost from 4 thousand rubles. and higher.

Benefits

What can give an anti-glare protective film?

1. You do not have to think about regular restoration of paintwork.
2. The products serve for a very long time without changing their color. The body is protected at the same time.
3. A transparent film is applied very easily. The motorist can do this even with his own hands. The material is able to stretch. Due to this, it easily takes the form of any object.
4. To notice its presence is difficult, since it practically does not differ from the color of the body. She does not distort it.
5. Simple dismantling is another advantage. The film is much easier to remove than applied.

Installation of anti-gravel film and its nuances

If you ever applied a film, say, toning, then in this case you will not have problems.

The algorithm is simple:

1. Clean the surface of dirt and grease.
2. Take a film, cut out of it a fragment, suitable in size. Sometimes manufacturers produce billets for these or other parts, which is very convenient.
3. Treat the body with a soap solution. Put the film on top. Next you need to remove air bubbles.
4. Take the rubber squeegee and begin to smooth the surface. Note that it should be kept at an angle of 45 to 60 degrees. It is necessary to fix it firmly. If there is no soap solution under the film, scratches will appear on the paintwork.

Experts do not recommend self-adhesive expensive film if the motorist is not confident in their abilities. There is always the risk of spoiling the product for which a lot of money was given. In such cases it is better to turn to professionals.

You can send the car to the sink instead of washing yourself. During the procedure, a special shampoo is used. If the vehicle was in operation, it is necessary to remove contamination: bird droppings, bituminous stains, kidneys from trees and so on.

If you find scratches, you need to polish them. Traces of the used remedy should not remain.

Look closely at all possible gaps between the body elements. These are hard-to-reach places where a lot of dirt accumulates.

Which means are better for pre-processing a car?

Judging by the reviews, the following compositions are most popular:

• Cleaner glues 08984;
• Abrasive clay 38070;
• The cleaner of glass PN08888.

Requirements for premises

Please note that special requirements are imposed on the room where the anti-gravel film is installed. Reviews of motorists with experience indicate that the material does not tolerate drafts. Do not allow direct sunlight. All this contributes to the accumulation of dust, which subsequently falls under the product.

Under the conditions described, a rapid evaporation of the liquid for installation is also observed.

The temperature, considered optimal, varies between 13-32 degrees. In the heat, the mounting fluid consumption increases. Application on a dry surface is completely excluded.

The room should be light. It is better to install additional sources if the inside is too dark.

clothing

It would seem that it is not so important. Nevertheless, experts recommend avoiding tissues with easily detachable threads. About woolen products, too, is better to forget. They adhere to the adhesive layer of the film. Do not wear items of wardrobe with metal zippers or buttons.

Before work, certainly remove ornaments: watches, rings and so on. What is it for? They can touch the surface of the body and scratch it. Also, the anti-gravel film on the car suffers . The price for it is sometimes high, so you can not ignore this advice.

Other important nuances

Hand processing is not in the last place. Be sure to wash them both before the procedure and after it. If this is not done, the surface of the film may become dirty. Remove contamination in the future will be problematic.

In some cases, the film is installed with a bend. This means that you must first clean the internal surfaces of the parts. Use a soft napkin for them.

Determine from the very beginning, from which objects you will start the installation. People with experience advise first of all to stick a film on the hood. After that, you can go to the wings and mirrors.

Before you begin to separate the film from the adhesive layer, soak your hands in soapy water. They should not be dry, otherwise pollution will appear on the surface. You will notice them in the future when undesirable traces are visible on the hood.

This approach helps to get rid of static electricity. This, in turn, guarantees protection from dust adherence.

You can immediately unwind the film from the roll, applying it to this or that object. There is another way. Place the roll on the hood of the car and separate the material from the liner completely.