Why does not the computer see the iPhone and what should I do?

Communicator iPhone - the legendary device and object of desire for millions of people from around the world. However, even with this phone there are difficulties. Let's try to figure out why the computer does not see the iPhone and what to do about it. The phone from Apple is popular in our country. Despite the fact that this device is much more expensive than its competitors, it enjoys an incredible demand - it's prestigious and elegant.

Why the computer does not see the iPhone: reasons

So, you connect to the iPhone computer, but in response silence. First of all, Experts advise to investigate the cable in search of possible cuts or cracks. This is especially true for people who live with pets. In the event that such an inspection did not work, try inserting the cable into another USB port - perhaps the problem is in it.

Look also at the phone connector - there is a possibility that the contacts are oxidized. To bring them to a normal state, it is enough to use the eraser, having carried them directly to the contacts.

If the computer does not see the iphone because of the cable, and it needs to be replaced, we advise you to purchase the original part - even if it is made in China, it costs a little more than a copy, it will work much longer. Falsities are characterized by glitches, and they quickly break down.

The computer does not see the iphone: the case in the communicator

If you managed to find out that neither the USB port nor the cable is not to blame for the problem, most likely the problem occurred in the phone itself. In practice, often The lower loop in the power connector is useless . This part breaks, as a rule, when the smartphone is prone to falls. Probably, one day the phone fell on the back of the case, and this affected the operability of the loop.

If, for example, the computer does not see the iphone 5 for the above-described reason, the work to replace the specified part will cost about 1000 rubles, possibly even higher. In this case, the price does not significantly depend on the modification of the communicator. Note also that sometimes the owners of the iPhone themselves change the loop.

However, without the necessary skill to take such actions is highly discouraged, since it is likely that you will not get the smartphone back if you do not have professional knowledge in this area. Thus, in passing, something else can go wrong.

Destructive power of water

Very often the problem occurs when moisture enters the smartphone. You can object: "The computer does not see iPhone 3g, but I did not bathe with it." Doing this is not necessary. It is enough only to hold the communicator in a room in which high humidity prevails. This can cause serious problems, because the moisture still falls into the internal space of the phone.

If you find out in these lines your case, it is necessary to turn off the device and Contact the service center. But especially ingenious users disassemble the communicator on their own, after which they dry it. However, it is possible to resort to such measures only if you are absolutely sure of your own abilities.

The current is to blame for everything

From time to time, the computer does not see the iPhone 4s (maybe another modification) due to a malfunction in the power supply chip. To my great regret, the detail is expensive, and its replacement can cost about 3000 rubles, and sometimes more.

In addition, we must not forget that the firmware can also show character. Especially frequent failure in the case of unofficial firmware. It is necessary to return the phone to its "clean", factory condition.

Possible Solutions

When it comes to USB-cable, when it is replaced with a working one and tested, it pleases that you can get such a useful thing in a variety of electronic shops.
If the problem is intrinsic, and you have experience in repairing the iPhone, you can replace the nonworking part yourself. In the absence of necessary knowledge, contact the professionals from the authorized service centers.

ITunes does not notice the iPhone, or Software Problems

First, reinstall the iTunes application by downloading the latest version on the official website. If that did not work, let's move on to configuring the operating system.

If the computer is deployed with the "Windows XP" platform, you must follow these steps: close "iTunes" by disconnecting the device. Go to the "Start" menu, click "Run", and enter in the appeared window "services.msc". A similar result can be achieved by going to the "Control Panel", the "Administration" section, the "Services" item.

Next, we find the item "Apple Mobile Device", in a special window click on "Stop". After stopping click on "Run" in the same window. As soon as The restart of the service is completed, iTunes will be fully prepared for working with the communicator.

If you have Windows 7 or Windows Vista installed on your computer, go to the device manager, right-click on the "Apple iPhone" and select the "Update driver" function, which appears in the pop-up menu that appears . Next, we search for the driver on the computer by means of the corresponding item.

After that, we are interested in choosing a driver from the list already installed. We address to "installation from a disk". In the dialog that appears, click the "Browse" button. Go to the C drive, the Program Files folder, then Common Files, then Apple, the required Mobile Device Support, and finally the Drivers directory. Run the file "usbaapl".

Click "OK" in the installation window from the disk. Click "Next" and finish the driver installation. Open the "iTunes" program to verify that the device is recognized correctly.

If the problem occurs in the "Mac OS X" environment, disconnect the communicator from the computer, closing it first in "iTunes". Open the file manager called "Finder" and move several items to the Recycle Bin: a folder with the application "iTunes", a shortcut of this program from the special launchpad, files "AppleMobileDevice.kext" and "AppleMobileDeviceSupport.pkg".

Restart the computer, delete the contents of the Recycle Bin, reboot the computer again. Download the latest version of the iTunes application for the Mac platform. Connect the device and use iTunes. So we have analyzed the main cases in which the computer does not see the iphone, as well as ways to solve this problem. Just a few simple steps can help you get rid of problems, but if this does not happen, as soon as possible, carry the device for in-depth testing to the service center.