Why do I need a garden ripper?

For any work in the garden requires a variety of adaptations. A properly stocked gardening inventory greatly facilitates the work of the gardener. When cultivating the soil (agrotechnical measures), a horticultural ripper is used - an instrument that is used for a careful and reasonable attitude to the land on the principle of "natural farming".

Ripper - what is it?

Lawn-and-garden ripper is a device that is used for manual loosening of soil with preservation of the top layer. The principle of the tool with this method of processing is to loosen the soil with a wide strip, without turning the earth coma. Sharp teeth easily and without much stress penetrate into the ground to 25 cm, which is quite enough for garden work. Rippers can be manual or mechanical, have a different number of teeth and a width of grip. An important parameter of quality is the weight of the instrument. It should not be too heavy or light. To select a suitable tool, you should compare several suggested models.

Why you need a ripper

Soil loosening is an important process that must necessarily be present in the complex of land works. Garden and garden ripper will help loosen beds and flower beds, without violating the integrity of the soil. With the preservation of the structure of the earth layer, the balance of the microflora of the soil remains the same. The main tasks of this treatment are: enrichment of the soil with oxygen, ensuring easy penetration of roots, leveling the surface, applying fertilizers to the inner layer. Loosening is done with the help of a system of levers, so this garden tool can be used with varying degrees of physical fitness.

The principle of soil cultivation with the help of this tool is quite simple. Set the ripper vertically on the selected area, press the stop, while the forks enter the ground. Step back, pulling the handle toward you. Stepping back again, without lifting from the surface, pull up the ripper and return to its original position. Repeat the above steps.

Ripper "Crotchel"

Garden-truck ripper "Krotchel" is used to perform two tasks - simultaneously digging and loosening the soil. After processing the soil with this tool, you can forget about weeds for a long time, because weed roots are pulled from the beds to the surface, where they can be collected accurately. The ripper has a robust construction - two forks facing each other. Working forks are convenient to insert into the ground, since the foot rest is located above the frame. The material of the construction is a strong tool steel. However, do not forget that "Crotchel" is not intended for loosening the virgin land. Do not use a ripper for the processing of turfy, stony and hard soils.

Ripper "Digger"

The cultivator garden-garden "Digger" digs up the ground with parallel loosening. The basic design of this instrument is extremely simple and similar to "Crotchel" - two forks and a frame with an emphasis for the foot. All elements are securely connected. The height of the handle with the handle can be adjusted to its height. The manual soil ripper is easy to apply in work - the forks are pulled on themselves, without loading the back. Several modifications of this miracle-shovel are produced. Models differ in the width of the digger and the number of teeth.

Garden hoist has excellent reviews from Russian gardeners. The main advantage of working with this tool is less effort to loosen the land, which is especially important for the elderly.