Water heaters: a review of models from leading manufacturers. Is it possible to make a water fan heater yourself?

Today on sale it is possible to find climatic installations and heating systems in the big assortment, they allow to regulate conditions of an internal environment of premises and to support a comfortable microclimate. Most of them are effective only on a small area, at home. They are characterized by a high level of energy or fuel consumption. Especially for such cases, industrial heating systems have been developed, among them water heaters can be distinguished.

Such heating systems are characterized by low efficiency in terms of the time it takes to warm up the premises. The optimal option for working rooms and residential buildings are water heaters, which combine the basic principles of an air-water heating system.

Overview of the characteristics of the fan heater Polaris PCDH 1715

For this model will have to pay 1100 rubles. The device is based on a ceramic heating element, during operation the user can operate the unit in such a way that it operates in one of three intensity regimes. The rated power is 1500 watts. Dimensions of the device are small: 16 x 16 x 18 centimeters, which corresponds to the width, depth and height.

Characteristics of the fan heater Electrolux EFH / S-1115

If you are interested in water heaters, then you can pay attention to this model, which costs only 1000 rubles. The device is operated by a spiral heating element, and the rated power is 1500 watts. The dimensions are slightly larger than the device described above and are 17.5 x 13.5 x 25.1 centimeters. Water heaters of this type are purchased by consumers quite often, with their help it is possible to heat a room, the area of which is 16 square meters. The room can be heated for a short time, using the necessary power modes.

As a single minus, a sufficiently high level of noise can be produced during operation, but it is acceptable. However, this is the sin of almost all fan heaters, which is especially true for industrial models. This water heat fan for the first 2 minutes can give off extraneous odors, which then evaporate. An additional advantage is that the device does not dry the air.

The main features of the heat engine brand "Teplomash" KEV-40T3,5W3

If you need a more powerful device, you can buy water heaters "Teplomash". The above model, for example, costs 18500 rubles. This fan heater is intended for heating of administrative, industrial, office and warehouse premises. Installation is universal, that is, you can mount the device both horizontally and vertically, which expands the field of use. Water heaters "Teplomash" are mounted with the help of a bracket, which makes it possible to adjust the angles of rotation and tilt of the unit. With the help of adjustable shutters, the airflow can be directed to the required area. Water heaters of this type are industrial devices, they are powered by 220 volts. The air consumption per hour can vary from 800 to 1600 cubic meters.

The isothermal jet has an effective length of 12 meters. Before buying such a device, it should be taken into account that it requires a free space, the length, width and height of the fan heater are 480 x 318 x 408 millimeters. It is possible that external assistance will be required for installation work, since the mass of the device is significant and is equivalent to 18.5 kilograms.

Some features of Volcano fan heaters

If you liked the Volcano water heaters, then you should be aware of its main advantages. Among them, there is no need to use outdoor air. These devices use the air that is available in the room. With the help of a blind and a special fan, warm air is distributed in 4 directions.

These devices are able to accurately maintain the user-defined temperature. This feature is provided by a temperature sensor that checks the room temperature every 60 seconds.

Preparation of materials before the manufacture of the fan heater with their own hands

Fan heaters with a water source of heat can be manufactured by you yourself, if you do not want to purchase the device in the store. To perform the work you will need a sheet of galvanized steel, a tube for the heat exchanger, two end cranes, channel fans and 4 springs for fastening. Experts advise to purchase an additional Maevsky crane, which is useful for removing air congestion.

Required Tools

Fan heaters with a water source of heat can not be manufactured without an appropriate tool, namely electric jigsaw, drills, threading cutting dies , and metal scissors, rulers and pencils. If you manufacture the device by connecting to a central heating system, it is recommended to use a 0.5-inch clutch.

Assembling

In order to assemble a thermal water fan heater, you will first need to make a markup, and then using a metal scissors or a bulgarian to cut a strip of metal, which will give an improvised frame. The width of the strip should be equal to the width of the device body. The length of this workpiece is equivalent to four sides of the device. On the strip you should note the fold lines, and then you can start the process. Opposite sides are connected with rivets or rims, for this purpose it is necessary to form a border in width in 2 centimeters. From the remnants of the material, a front panel should be made, in which air outlets are made. The element is fixed on the front side of the frame.

Methods of work

When the water fan heaters are made by one's own hands, it will be necessary to fill the copper tube with sand, close one end and bend the heat exchanger. After that, the element can be freed from sand and blown. On the side of the body an opening is made to exit the ends of the heat exchanger. The thread for the coupling must be made on it. From above, it is necessary to install the Maevsky crane. Now it is possible to assemble the device: the finished housing is supplied with a heat exchanger at the same time, its ends need to be supplemented with nuts on both sides.

For the heat exchanger, a fan should be mounted, for this purpose holes are drilled in the corners of the housing to install the springs. The fan should be in the center of the device. The device is installed on the wall in such a way that there is a gap of 10 centimeters or more between the surface and the heater. To the central heating pipes, you should attach the cranes, and connect the fan to the fan through the coupling.