Vertical heating batteries: description and reviews

Developing interiors, modern designers are thinking over every little thing. However, traditional heating appliances that look cumbersome and painted with white paint can not decorate the room. Manufacturers offer decorative lining for sale, as well as panels with perforations, but their downside is that the heat output of the devices is reduced.

Not so long ago the market of heating equipment has a functional novelty, which has an attractive design. It's about vertical radiators.

Description of cast-iron vertical batteries

Vertical heating batteries are still called high, and they can not be installed in a traditional way, because the window opening simply does not fit such a device. There are different devices for the material of manufacture. Among others on sale it is possible to meet cast-iron radiators which have set of pluss, namely:

• High heat transfer coefficient;
• No restrictions on the acidity of the coolant;
• Ability to undergo high pressure in the system;
• High resistance to corrosion;
• average cost.

However, these devices have a large weight and inertia in the thermal plane. For their installation, sufficiently strong fasteners and appropriate strapping are required. This equipment is not possible to install thermostats.

Description of aluminum vertical radiators

If you are interested in vertical wall heating batteries, then you can pay attention to their aluminum version, which is a low-temperature device. This indicates that the level of heat return to the room is provided by the impressive area of the device itself. In this case, it is possible to maintain a stable temperature in the range of +22 ° C, but the temperature of the coolant should vary from 60 to 70 ° C.

The advantages are low inertia, low weight, the use of steel nipples when connecting sections. The latter factor allows you to replace damaged parts quite simply.

Disadvantages of aluminum appliances

However, such devices also have disadvantages, they consist in high cost, limitation on the pH of the coolant, which should be equal to or greater than 7, and also in the necessity of using an automatic valve for discharge. It is impossible not to distinguish one more feature, which consists in limiting the working pressure in the system. This parameter should not exceed 10 atmospheres.

Description of steel vertical batteries

Vertical heating batteries are also steel. Models can be tubular or wall-mounted, and steel in the base has a thickness reaching a mark of 1.5 mm. The parts are welded together laser or standard, and the grooves on the surface of the products are the connecting channels, which are known as collectors.

The external surface of these structures is covered with enamel and heat-resistant varnishes. If you want to get a higher heat output, you should prefer panel radiators, because they are supplemented with an automatic thermostat and are able to undergo pressure up to 10 atmospheres. Steel vertical heating batteries have another significant disadvantage, which is expressed in susceptibility to water hammering. Therefore, we should not allow the probability of lack of water in the system for more than 2 weeks. Such batteries are most often used for central heating systems.

Reviews of tubular vertical radiators

Such batteries are the most progressive today, which is why they are so good for implementing design ideas. According to buyers, on sale it is possible to find similar devices of any shape, however they will have less impressive heat emission.

Consumers emphasize that such heating appliances have leaky zones that are located in the welding places. You can use the devices for individual heating systems. And the owners of private houses note that they are trying to choose appliances, the interior of which is covered with polymer paint, as this reduces the risk of corrosion.

Description of bimetallic vertical batteries

You can choose bimetallic vertical heating batteries , based on aluminum and steel, which allows you to take advantage of the devices with the greatest efficiency. Steel is used to make a core that will contact the coolant.

But aluminum is used to form joints and an outer shell. Such devices can become part of the central heating system. And if you look at the technical passport, you can make sure that the bimetallic radiators are able to undergo pressure up to 40 atmospheres. Such vertical heating batteries have a few additional advantages, such as:

• High resistance to corrosion;
• Inertness to the level of acidity of water in the system;
• Light weight.

Reviews of vertical radiators in terms of the type of connection

When choosing vertical batteries, you should pay attention to their classification. Devices are subdivided into: smooth, ribbed, sectional, tubular and linear. However, it is important to consider also the type of connection, which can be lower, lateral and diagonal. According to buyers, the first type of radiators is the most expensive, but often found. With the lower type of connection, it will be easy to install a vertical radiator, but the pipes are mounted inside the wall, they can also be laid in a decorative box.

Home masters note that the side connection can not be called effective, because the coolant in this case can remain inside the radiator even in the warm period, which negatively affects the quality of the device. Choosing vertical heating batteries, photos of which are presented in the article, you can pay attention to those that assume a diagonal connection. According to consumers, it is the most efficient, the input will be located at the top, and the output - from the bottom. The dimensions of the instruments do not have limited standards, and the height can reach 6 m and a width of up to 3 m. If you want to improve the efficiency of the heating system, then, as the buyers say, it is best to choose two- or three-layer structures.

Positive feedback on vertical heaters

Vertical heating batteries are gaining popularity quite rapidly, this is due to a variety of factors. Among them, consumers distinguish:

• A huge selection of design and color solutions;
• Relative compactness;
• Wide assortment of fasteners;
• Easy installation;
• A large heat transfer area.

You can buy such devices not only in the store, but also from private manufacturers, who manufacture instruments for individual orders in the form of mirror panels, tubular eights and other intricate elements. Buyers note that this fact is the most significant criterion in choosing high radiators.

If you want to design the premises of your apartment, which has a rather limited area, but you want to resort to modern design solutions, then vertical heating appliances will be your best choice, because they will not occupy a place at the bottom of the room, and for panoramic glazing and will be the only correct way out . If desired, vertical heating batteries in Tver can be purchased for 8700 rubles. In this case we are talking about a tubular radiator. But such an affordable price is not the only advantage. Plus, consumers also consider the choice of different wall materials for installing batteries. Mount the radiator can be on the brick, cement, concrete, etc. The installation will be fairly easy, and additional skills, tools and knowledge will not be required, which will save you money.

Cost

Before starting repairs, you can purchase vertical heating batteries in Russia. The price for them has a fairly impressive run-up. For example, for the device from the manufacturer Vertical have to pay 11,300 rubles., While the radiator Tinos V will cost 44,300 rubles. Indi's products are similar in price to the above model. For the batteries in the latter case will have to pay 39 900 rubles.

Chinese vertical heating batteries, as practice shows, are somewhat cheaper. For one of these models, based on duralumin, you will have to pay 16,000 rubles. The connection will be lateral. But for the model Paros V from the manufacturer PURMO, suppliers ask 22 500 rubles.

Negative feedback

If you select vertical heating batteries, 150 mm is a parameter that can mean the interaxial distance. However, this characteristic does not affect the operational characteristics too much. It is more important to know that when working in such devices, most of the air goes under the ceiling, so consumers recommend to install them closer to the floor, which can not always be called a positive advantage.

Customers like design ideas embodied in vertical heating appliances, but they negatively affect the cost of the product itself and components. The price is much higher compared to similar skirting boards or horizontal devices. But for models from the serial collection or custom-made options, the cost will be even higher. To purchase designer radiators, you will have to pay an amount that is 8 times the price of an ordinary horizontal battery. Buyers do not really like the diagonal connection with external pipes, which does not look so attractive, so experts recommend hiding pipes inside the wall, but this will cause additional costs.

Conclusion

If you decide to choose vertical radiators to equip the heating system of your house or apartment, you should consider their main feature, which is an impressive weight compared to other types. That is why high radiators are installed on the supporting wall, and are located near the riser. Do not choose as a wall for installing partitions, which are made of GKL, chipboard and MDF, because they simply can not withstand the weight of the structure.