Automobiles, Cars
VAZ-2110: replacement of the clutch cable
Coupling in the car plays a very important role. This unit detaches the engine and the box for a while. After the gear is engaged, these gears re-engage. On domestic cars VAZ this function is performed by the clutch cable. 2110 is no exception. Over time, this element fails. And today we will look at how the VAZ-2110 clutch cable is being replaced with the removal of the windscreen wiper and without removing it.
Device
On modern cars, the clutch fork is powered by a hydraulic drive. The main and working cylinder of the clutch is engaged. On the VAZ-2110 this plug moves mechanically, with the help of a cable (the same as an accelerator).
- Cable sheath.
- Mounting brackets.
- Lower end of the cable sheath.
- Adjusting nut.
- Protective cable case.
- The upper tip of the shell.
- Thrust plate.
- Sealant.
The entire mechanism is controlled by the clutch pedal. It is suspended on a separate bracket. Pressing it, the driver moves the clutch fork. That in turn detaches the box from the flywheel of the engine with a basket and a friction disk. After turning on the desired gear under the action of the return spring, the pedal moves upward. The friction disk engages with the flywheel. The transmission of torque is made to the box, and then to the driving wheels. The drive has a fairly simple device, so the owners often do not face the problem of replacing the cable. However, if it is interrupted, you will notice it immediately. The transmissions will not turn on normally.
Why is this happening?
In general, a cable is a very reliable element, and it is difficult to break it. As a rule, such a breakdown occurs due to a heavy load on the part (or the car traveled more than 300 thousand kilometers).
Instruments
To perform this operation, we need a minimum set of tools. Among them, it is necessary to prepare the keys "for 8", "for 17" and "for 19". We also need a Phillips screwdriver. Replacement clutch cable VAZ-2110 own hands can be made in two ways:
- With the removal of the wiper and frill.
- Without removal.
Let's consider both options in more detail.
Method number 1
This method takes a little longer. However, dismantling of such elements as windshield wiper and jabot (this is a decorative panel that is located under the "shackles" of wipers) will greatly facilitate the process of changing the cable. So, where does the work begin? First, it is necessary to remove the windscreen wiper with a wrench and then the plastic cover underneath it.
Method number 2
Now let's consider how the VAZ-2110 car is replaced with a clutch cable without removing the windscreen wiper and the decorative lining. First, we pick up the key "for 19" and unscrew the fastener of the cable. Remove the tip from the clutch release fork.
Adjustment
Regardless of how the VAZ-2110 car was replaced with a clutch cable, the element must be adjusted after the work was done. The whole point of the operation is to set the pedal free play.
Conclusion
So, we found out how the VAZ-2110 car replaces the clutch cable with the wiper removed and without removing it. As you can see, this procedure can be performed independently. And if such a breakdown happened on the way, you can always get to the repair site on your own. You can buy a clutch cable at any car store. The price of this element is about 360 rubles.
Similar articles
Trending Now