The telescopic rod is a good choice for any fisherman

In our time, the telescopic rod is one of the most popular gear. The range of its application includes both traditional fishing with a float, and a summer version of fishing for mormyshku. The telescopic rod can be used for bait and bottom fishing with easy rigging. It is designed for fly-casting, so its strength requires special requirements. Rods telescopic must withstand high dynamic loads. Despite this, the mass of them must be minimal, so that they can be held in their hands for a long time.

The telescopic rod consists of several elbows (tubes) of different diameters entering into each other. They are spread out by means of small rings fixed on the ends of these knees. On these rings there is also a line, the length of which thanks to the coil can be adjusted in large ranges. Thanks to its design, such a rod allows the fisherman to quickly change its size. The advantage of such a fishing tackle in the first place is its length, which sometimes reaches 10 m.

The use of the vacuum technology of making knees and high-modulus carbon fiber during the production of these fishing tackles allows to reduce the weight of the telescopic fishing rod to the very minimum. These features of production also contribute to the increase of rigidity of the rods. On sale there are models with and without pass-through rings. Most of them are equipped with special quick-acting reel holders. Their surface has a special texture, which facilitates the convenient holding of the fishing rod in the hands.

The modern telescopic rod is very simple to handle. Some models are so compact that they can be worn even on the belt. If necessary, you can remove the cap-stopper and disconnect or replace any of the rod's rods. This also allows (if necessary) to extend or shorten the telescopic rod, and also to arrange the rigging as desired.

Despite all their advantages, such rods have drawbacks. The most frequently broken joints of the knees, although their walls and strengthened by special metal rings. The ratio between the length of the knee and its 6: 1 joint is considered to be the most acceptable. It is unacceptable and loose connection of segments during the fishing, as the lever forces that arise in these places are capable of disabling the entire structure. When fishing, all parts of the fishing rod should be pushed to the limit.

Many professional anglers say that carp telescopic rods are not suitable for fishing. To fish this type of fish, very long fishing rods are really required, but they must also be very strong. That is why the vast majority of rod for carp has two parts (a section (bottom) and top). On the joints of carp fishing rods there should be clamping nozzles or bushings.

In order for the telescopic rod to serve for many years, it is necessary to observe the simple rules of its operation: in a timely manner, cleanse the knee joints from contamination; Do not allow turns in the joints; Assembly must be done only starting from the top; Disassembly is made starting from the bottom.