How to make a zakidushka? Top recommendations

The zakidushka is a homemade fishing tackle. It is very convenient, as it is thrown to a considerable distance from the shore. It is used mainly for catching fish, which lives on the river bottom. How to make a zakidushku, we will tell in this article.

Such fishing tackle is convenient in that it covers a large water area, and its production does not require significant monetary costs. The zakidushka consists of a spout, to which a motovillet is attached, a main line (sometimes a nylon cord is used), a weigher, several leashes with hooks and a bait detector. For the latter, you can use anything, from the usual clothespin to the bell.

How correctly to make a zakidushku? Component parts and manufacture

A hard whip or a strong, narrow board will be suitable for the jib. At the end of the ring is fixed to pass the line, and below (25-30 cm) motoviltse or a small coil. The length of the line should be at least 30-50 m, diameter from 0.3 mm and more. For catch of medium-sized fish, leashes of 0.18-0.25 mm are suitable, for large individuals it is desirable to take from 0.3 mm. Their length is 15-30 cm. Hooks are selected according to the bait used. The weight of the weights is usually from 50 to 200 g. There are 2-3 leashes for fastening the muffin, on each of them there are 1 or 2 hooks.

How to make a zakidushku with a good alarm?

You can use a bell that is attached to a piece of rubber, with a hole for the line. After throwing the muffin, the alarm clicks into the ground in an upright position. The line is slightly tightened by the fisherman and hangs relaxed at the base of the rod. After biting the fish, it stretches, and the attached bell begins to ring. You can use the usual clothespin. After casting the muffin and installing the jib, the fishing line is tightened, after which a clothespin is hung on it. As the fish bite - the alarm will jump up. The bell is more convenient because you can not follow the tackle, focusing on its sound, in the second case you need visual attention.

Fishing techniques

Now, how to make a zakidushku, the reader is clear. Let's go directly to the catch. The casting of the zakidushka is done as follows: the line is laid with rings at the feet, the end with the sinker is picked up (slightly higher than the leashes) and, swinging, is thrown into the river. You can untwist over your head to throw away.

The bait must fly to a distance of 30 m from the shore and more. After the load is at the bottom, the line is stretched a little. If it is not attached to the spool and spit, then its end should be fixed on the shore, so as not to drag the fish into the water. After biting the fish cut, holding hands with a fishing line.

Some features

We explained how to make a zakidushka. Now a little about gear, designed for carp or carp personally. It is slightly different in design from the one described above. How to make a zakidushku for crucian? The main difference lies in the additionally attached trough. It is attached to the load sliding on the line and plays the role of bait.

When collecting for fishing, it will not hurt to have 2 or 3 muffins among your gear. They do not require much time to set up, do not interfere with fishing with fishing rods in parallel and will certainly raise the catch.