How to make a grinder yourself? Mini Grinder with own hands

One of the most primitive and known methods of crumbling tobacco is treating it with scissors or a knife. However, in recent years, such a device as the grinder has become very popular. This tool was originally designed as a means for grinding tobacco. It's much easier to use than scissors, and you can process the material faster. Some consider the grinder an excessive accessory, but it still does not affect its popularity in the world.

Why is it needed?

As we know, when grinding tobacco, the area of its contact with fire increases significantly, which guarantees a longer and more efficient burning. In other words, the smaller the particles of the material, the greater the efficiency of smoking. For these purposes, the grinder was invented. That is, the more thoroughly the tobacco is crushed, the longer it will burn. The economy here is obvious. That is why this tool is so popular with adherents of modern culture of smoking.

About construction

The grinder itself consists of two parts, which in their form resemble a small box. Each of these boxes has its own blades or pins. Inside it is filled with tobacco - and the top part of the device is closed with a special lid. Then the grinding process takes place. Rotate the boxes in different directions. As a result, the material is crushed more thoroughly. This happens until the blades finally process the tobacco to the desired state, that is, to the smallest particles.

How to make a grinder yourself?

In general, the procedure for manufacturing this device with your own hands does not take much time and effort, which is probably connected with its primitive design. Therefore, to make a grinder with your own hands at home can be absolutely everyone. At the moment there are several ways of making homemade parts. Each of them uses its own material:

• Metal.
• Tree.

We will consider each of these methods separately.

Making a metal grinder

Let's start with steel devices. Before you start, you will need to prepare a metal workpiece and find a lathe, on which it will later be processed. If you have the opportunity to carve this device, it's very good. But since such equipment is not available to most citizens, we will consider the option of processing on a lathe.

Among the many tools we will need a plastic or steel box in the shape of a washer, metal scissors and pliers. We also need a grater for vegetables. The latter is processed as follows. Two mugs are cut from the grater. Their diameter should not be less than the width of the prepared box. At the edges of each of the cut-out circles, small incisions should be made and, with the help of pliers, bend them so that the sides are formed. Thus it is necessary to watch that sharp ends of a detail left outside. Each detail is placed in its own part of the box, and there are, as we mentioned earlier, only two. In principle, this is the solution to the problem of how to make the grinder by hand, completed. After manufacturing the device, you can immediately test it for performance. But why are metal grinders less popular than wooden analogs? Their main drawback is that they are not very convenient to rotate. Therefore, below we give one more instruction for the manufacture of the device, only with the use of wood.

How to make a wooden mini-grinder with your own hands?

Just note that for work we will need to use several metal tools, since it is simply impossible to completely manufacture this product from wood.

So, we need to make a wooden grinder. To do this, you will need to prepare a wooden workpiece, a knife, nails, a hammer, a file and a chisel. The last detail along with the knife is used in the production of boxes, i.e. parts of the grinder. When manufacturing these boxes, you should determine in advance exactly where to drive small nails. By the way, their hats must be cut off. This can be done with the help of regular pliers. Place the nails in such a way that they do not interfere with each other during rotation.

The principle of manufacturing a wooden grinder does not differ significantly from a metal product. However, it should be noted here that you do not need to cut a box of wood. Small nails are stuffed with a hammer on wooden washers. And if everything is carefully calculated, you can get this souvenir article.

Grinder from improvised materials

Another very interesting method, however, in its complexity it is the heaviest among all the others. Here we need a jar of soap bubbles or film, several cylindrical pieces of wood, a hammer, a drill, a saw and nails. Having gained patience and having prepared the necessary set of tools, you can proceed to work.

First of all, you need to cut the jar into two parts. As for the cylindrical pieces of wood, they can be cut off from the shank of a shovel or rake. It is enough to have two pieces with a diameter equal to the thickness of the jar. In this case, the part of the tree that will enter the part of the can with the lid should be a bit narrower than all the others. Also, you need to do here a couple of through holes, through which tobacco will wake up. Next in both pieces of wood you need to score small nails. Again, they must first cut off their hats. From the largest nail it is necessary to make the central axis. This is necessary for a more convenient grinder rotation. All - the product is ready for use. In order to fall asleep or take out tobacco from such a device, it is enough to open the upper lid of the can. It is possible to make such a simple grinder with your own hands in a few minutes, but you can use it until the blades are blunt.

We make a grinder from grinders for spices

This is perhaps the fastest and most primitive way of manufacturing a shredder for tobacco. All we need to prepare is a small mill for pepper or spices. There is no need to make a grinding mechanism in the mill itself, since it is already there. The grinder belt is also not installed by its own hands. Immediately after the purchase of such a device, you can drop tobacco into it and crush it to small particles. In fact, the only thing that distinguishes such a "craft" from a true mill is a kind of processed material. If in the first case, pepper or spices are used, then tobacco is poured into the second. The main disadvantage of this product is the lack of capacity for the material. That is, tobacco grinds immediately when it is shredded. Therefore, in order not to scatter it to the floor, it is necessary to lay a sheet of paper on the table in advance.

Sharpness of the tool blades

It should be noted that the sharpness of the blades, which are used in all of the above-mentioned hand-made articles (whether you were making a band-saw grinder with your own hands or some other tool), can differ significantly in one direction or another. However, in any case, such blades will be more often dull than on factory analogues.