The device of a roof from metal: building technology

Metal tile - a building material for the roof, which is a profiled sheet, which are made of galvanized steel. Special layers perform a decorative function and protect against corrosion. The dimensions of the metal tile sheets depend on the manufacturer and the requirements of the customer. The greater the height and thickness of the selected material, the greater the rigidity of the roof. In addition, it will simplify the process of transportation and installation, during which you should pay much more attention to thin sheets. The device of a roof from metal-tile is an excellent variant, after all the guarantee for the given building material - about fifteen years. If the rules of installation and operation are observed, this period may exceed fifty years. The device of a roof from metal can be made by the person without experience. For this it is enough to consult a specialist or follow a training brochure.

This building material produces a color palette of forty colors. Also, an important feature of metal roofing can be called a high level of strength and resistance to temperature fluctuations. From its surface, no harmful substances are released during the heating process, so it is absolutely safe for human health. Any roofing material in general is quite noisy, but the technology of roofing from metal roofs can significantly reduce the noise level due to the presence of an additional layer of sound insulation.

Specialists use computer programs designed to economically cut the material, thereby reducing the amount of waste.

It is possible to distribute the roofing device from metal tiles for several stages. After installing the waterproofing material, a crate must be installed. In the process of its installation, it is necessary to provide for fastenings for communication networks. Further, the end plate is installed, the boards of which are joined to the rafters with the help of galvanized nails. Continues the installation of the roof of the metal tile installation of the cornice bar. Each of them is attached to each other at a distance of 30 cm. Metal sheets begin to be installed from the end, if it is a gable roof. In the hipped version they are mounted on both sides from the highest point of the ramp. You can start the installation from both the right and the left. The lock of a wave of sheets of a metal tile is covered by the sheet going further. Its edges are mounted on the cornice and protrude for it at 40 cm. They should make an even line. Under the first fold, running across, at the top of the wave overlap is attached using a single screw. After several sheets are connected to each other, the bottom edge must be aligned along the cornice. Then you can install metal sheets of tile to the crate. For this, screws with a sealing washer must be screwed perpendicularly to the roofing sheets in the deflection of the wave.

The device of a roof from a metal tile will provide reliability and durability of a roof of any building.