Step-by-step instructions on how to write "Windows 7" to disk

This article will tell you how to write "Windows 7" to disk. After all, the installation disc is a new image of your operating system. Its value is significant enough, especially if you can not log in, because you forgot the password, or you need a "clean" operating system.

We return everything to the place

The recovery disk "Windows 7" makes it possible to roll back the system to the required recovery point. This procedure is performed using the Windows PE environment. A rollback of the system can also be done using the image of the operating system "Windows 7".

The boot disk with the OS will easily help to cope with certain problems that arise with the system.

Download

The first step is to download the image of the "Windows 7" disk .

To make a system image on a disk, you can use several methods, but the easiest and most convenient is to simply download it. In the network, you can find many different assemblies of the Windows 7 system.

It is desirable that the assembly be official, but since it is rather difficult to find it, it is recommended to use at least similar assemblies of the Windows 7 system image. The easiest way is to download the system image from any torrent, without any unnecessary problems and nerves.

Checking

Now we proceed to the main stage before recording the image of the operating system "Windows 7": you need to check the checksums, or a hash of the image.

This is an important stage that should not be missed, because non-attention to this step can lead to a lack of understanding of many of the problems that have arisen. For example, because the checksums do not match, the Windows 7 operating system can not be installed correctly on your PC, or it can not be installed at all. This is why the checksums for 32-bit and 64-bit systems are presented below.

• 32-bit: ISO: F5F51A544E3752B60D67D87A8AC82864;
• 64-bit: ISO: EA5FE564086214FCCF953354E40CE7C3.

Most likely, when downloading the image of the system Windows 7 will be presented in the ISO format. For verification, use the hash sums shown above, taking into account the bit depth of your PC.

There are several options for high-quality software, which will allow you to easily verify the checksum. For example, you can use MD5 FileChecker.

1. Open the program, select "Review".
2. Download the ISO file, and click "Calculate the checksum". To do this, you need to copy the checksum, which is represented in the assembly you downloaded.
3. Click "Check".

Make sure that the result that the author of the assembly gave, and the result you obtained, coincided.

How to write "Windows 7" to disk: n go to the point

Now you can create an installation disc for Windows 7. So, the image of "Windows 7" you already have, in addition, the checksums have coincided, The next step you can create an installation disc.

We take a new DVD-R or DVD-RW disc, insert it into the drive of a laptop or PC.

For better convenience, it is better to use a rewritable disc. If there was any information on it, it must be erased. But to create an installation disc, it's better to take a completely new one.

If you still erase the information, you need to select this drive in the explorer and right-click "Erase Disk". After that, you need to wait until the data disappears and a message appears that everything is ready.

Now finally figure out how to write "Windows 7" to disk.

We take a new or prepared rewritable disc, select the downloaded image and click the left mouse button on it two times. To record an image, you can use either a program to burn Windows disks , or a third-party program, for example NERO.

We open the means of recording, agree, by clicking the "OK" button.

We work with the program

After you open the program, you need to select a recording device. Select the writing drive. If there are several of them on your PC, select the one in which the disk is inserted. If the drive is one, then just skip this step, doing nothing.

The next step is to put a checkmark on, so that after the image is written to disk, this removable media has been tested.

Now click on "Record".

The program asks you to delete all the information on the disk, you agree and wait.

The disc is recorded, you can now install the Windows 7 operating system on your PC.

Next, we'll figure out how to burn the image of "Windows 7" using the program that Windows 7 itself offers. The program is called USB / DVD DownloadToolWindows 7.

This utility is officially introduced by Windows 7 to make it easier to burn the image to disk and create an installation disc. We go to the official site of Windows 7 and download the utility. After that, run it. Select the "Install" button. We wait until the installation of the program is completed, and click "Finish".

After the shortcut to the program appeared on the desktop, start it. Click the "Download" button and select the downloaded image "Windows 7". Press the "Next" button. There are times when the utility does not accept images, and an error message appears. In addition, if there is not enough space on the disk, a warning message will also appear. In this case, you need to check the hash and try using other programs that will help create the installation disk. It should be noted that in most cases USB / DVD DownloadToolWindows 7 successfully creates an installation disc.

After you have checked the checksum, and it has coincided, we proceed to the last stage of creating the recovery disk "Windows 7". Remember that to record a utility from Windows, it is better to use a new blank DVD-RW or DVD-R disc.

Now you can press the "Start recording" button and wait for the process of creating the installation disk to be executed. The process is successful, the disk is finished recording.

Finish

The operating system is ready for a new installation. It should be noted that a more universal way to create an installation image of Windows 7 is a bootable USB flash drive, especially if your PC does not have any drives. Either way, the choice is yours. In this article, we figured out how to write "Windows 7" to disk. Carefully read this article. At you all necessarily it will turn out. Successful installation!

Finally, let's say a few words about Windows 7. It is developed using NT technology. The system arrived on counters in 2009. Currently, the share of Windows 7 as a means to access the Internet around the world is about 55 percent.