Sliding door systems

All good cabinets-coupe, but the main thing is their dignity - a system of sliding doors. The doors of the closet are the main structural element. To produce high-quality doors, the "Ronicon" system is often used. Sliding doors are necessarily framed. The frames are usually made of either steel or aluminum. Sometimes from other materials, but only under the order. To the door from the inside from below and from above, rollers (for a steel frame) are fastened, due to this it moves along original guides, they are called tracks. Vertical parts are absorbed by special protective edges, so-called schlegel.

The type of frames used allows us to distinguish two types of sliding door systems - steel and aluminum.

System of steel

Very simple in the assembly, while relatively inexpensive, there is the possibility of adjustment. Differences from others are made both by geometry and by the color capabilities of the profiles used. The colors of the steel system are selected depending on the colors of the chipboard used - this is about 19 colors. The advantage is that the profiles made by the Italian technologies are repeatedly covered with plastic of the most different colors. The lengths of the special profiles are matched, so that they would be most suitable for the production of the doors of the closet. Production of the profile is carried out with the expectation of minimizing the residues, when manufacturing door mechanisms.

Aluminum systems

They are more reliable than other door movement systems. This depends primarily on the fact that the frame made of aluminum gives a high degree of rigidity to the doors, and they do not have a backlash on the guide profiles. Support wheels in the aluminum system are hidden inside of it, which does not allow to see them. Due to this, it is possible to use similar systems to separate space. If a transparent or translucent material is used for finishing the door, then an aluminum system must be used unambiguously, which will make the movement mechanism invisible. Colors used in aluminum systems can be the most diverse, but steady demand for champagne, for wood (walnut, cherry, oak), for gold.

Materials that are used to fill the sliding doors, panel (made of chipboard), made of plastic, mirror doors, made of a mirror, silver color, or tinted under a graphite or bronze, glass doors 4mm thick and higher. Glass can be tinted, or it is possible to use colored glass. Combined doors can consist of several parts, each of which is made of different materials. And finally, they can be executed in a mosaic style - the curved mosaic panels are pasted, often from mirrors.