Skeletonization of leaves: we create unique masterpieces by our own hands

Skeletonization of leaves with their own hands has become increasingly popular. After all, such leaves are widely distributed in scrapbooking and card-making, they are used in decorating gifts and bouquets and much more.

And individual, largest and delicate copies, many are placed in frames and used for decorating rooms. They can emphasize and complement the beauty and sophistication of any interior.

But how can you skeletonize the leaves with your own hands? Everything is simple enough. You just have to be patient and be careful.

What do we need to skeletonize?

• Calcined soda (used to be used for washing before).
• Water (the most common, in large quantities).
• Toothbrush (preferably not too stiff).
• Casserole (if possible not enameled, small).
• Directly the leaves (try to pick up even and strong enough if there are yellow ones - fine, they are stronger than green ones, they should be leathery and dense, for example, poplar, magnolia or viburnum leaves).

Skeletonizing of leaves: master class

The actions are performed in the following order:

1. It is necessary to prepare a saturated solution of soda in water. We take in the following proportion: one tablespoon of soda per half liter of liquid.
2. Leaves the leaves into the prepared solution and boil from forty minutes to one and a half hours. If someone is too lazy to wait so long, he can use a pressure cooker. Then time will be reduced to half an hour.
3. Leaves carefully washed with running water and still boiled in clean water for about an hour. The cooking time depends only on the quality of your source material. This is the most important stage in the process, such as the skeletonization of leaves with soda. They can not be digested, but it's bad too. Turn off the fire when the leaves are completely brownish-black.
4. We take the leaves from the pan one by one and carefully, without hurrying, we clean the flesh from each of them. If something does not work out, cook a little more.
5. If you accidentally tore one or several leaves during the work, do not throw them, finish them, rinse them and then simply lay the leaves on the table so that the gap is hidden. After a while, the hole disappears.
6. Well wash our leaves and get delicate skeletons. Skeletonization of the leaves with their own hands is practically over. It remains only to dry them and paint.
7. To make the leaves dry and at the same time remain even, they are recommended to iron and put them under the press. As an ordinary book.
8. When our skeletons are dry, you can start painting. If you need to whiten them, you can do it with the usual whiteness.

Conclusion

Profitably emphasizes the beauty and lightness of our leaves the paint of golden and silver colors. It is more convenient to use aerosol. She does not make them heavy.

Do everything neatly, the paint is difficult to wash off. For aerosol coating, it is not necessary to use the rule: one sheet is one color, fantasize!

Here's how the leaves are skeletonized with their own hands. Good luck in your work!