Replacement of a passing lamp in a domestic car

Most often the lamp in the headlights requires replacement in the event of a burnout. The reasons for this can be a whole lot, and the most common of all is the accumulation of moisture in the condensate. Water droplets fall under the headlamp and settle directly on the light source, as a result of which it burns out and becomes unusable. Replacement of the dipped beam lamp is one of the simplest procedures any motorist can perform, however this does not preclude the fact that one should use the instruction and advice of experienced car mechanics.

The incidents associated with the burnout of lamps in headlights are most often encountered in the owners of domestic cars. They require such procedures as the replacement of a passing lamp, Kalina, Priora and other cars of the VAZ concern. And in order to change the main LED in such a car, you must first disassemble the headlamp with a standard set of tools. A new lamp, which is screwed into the machine, must fully correspond to its predecessor in terms of both parameters and intensity of illumination.

Replacement of a passing beam lamp in the car begins with the fact that you need to open the hood and unscrew the stopper that keeps the spotlight in its place. After this, all the bolts and nuts that hold the lamp are unscrewed, and the latch is pushed back. This element must be easy to depress, and afterwards the lamp can be easily removed from the grooves. Taking out a burnt out lamp, it is important to remember its location well, since this is how you will have to screw in a new one afterwards. If it is fixed under the headlight in the wrong way, then sooner it can lead to a short circuit.

It is worth knowing to every car enthusiast that you can not touch the glass of the light bulb, so you can screw it by holding the cartridge. Also, you should check how firmly the new lamp is fixed in its place. In fact, the replacement of the dipped-beam lamp is over at this stage, it remains only to screw in its place the bolts and screws that hold both the cartridge and the headlight. Also, make sure that the latch snaps into place, and screw back the headlight plug. When the entire structure is assembled, it is important to check the operation of the new lamp. The light should come out evenly and immediately after the headlights are activated. Various kinds of voltage drops, independent switching-off of a lamp testifies to incorrectly conducted works.

You can buy suitable dipped-beam lamps in any specialized store, or by using the corresponding online store. As mentioned above, the lamp holder must fully comply with the car brand, as well as the year of production, otherwise the work of this part, which is so important for night driving, will be a permanent malfunction.

Some experts argue that the replacement of the dipped-beam lamp should be carried out in car-care centers. Masters who have a lot of experience working with machines will easily and very quickly carry out this simple procedure, and the result will be high-quality and durable.