Is it possible to remove rust from the body of the car? Than to remove rust from the body of the car: a remedy. How to remove rust from the body of the car with your own hands?

The external characteristics of the car, though not affecting its speed, but require the attention of the car owner. Scratches, dents, corrosion - all this significantly spoils the look of the car. If you can deal with some mechanical damage only in the STO, then you can try to eliminate the rust yourself.

Why does rust appear?

Corrosion is a damage that motorists have to face often enough. The problem is that the process is almost impossible to stop. If the rust has already appeared, the damage spot will only grow. If you do not take all the necessary measures in a timely manner, repair work will be much more expensive. At the initial stage, you can easily remove the rust from the body of the car in your own garage.

Moisture is the worst enemy of metal. Most often with the problem of corrosion have to face car owners who keep their vehicles under the open sky. Prolonged parking in the rain or snow can provoke the beginning of the process of decay of metal. Is it possible to remove rust from the body of the car? Yes, timely elimination of corrosion is simply necessary.

Stages of work

How best to remove rust from the body of the car? Where should we start? Work should be carried out in stages. The first thing to do is to thoroughly wash the vehicle. The body should be freed from dust and dirt. The next step is drying the car. Next, you need to carefully inspect the body for damage. This stage should devote more time. Places in which the process of corrosion has only begun may be practically not noticeable. Particular attention should be paid to the area with dimming in the form of small points.

Body preparation is an important element of the work. On the correctness of its performance, the quality of rust removal depends. The very work to remove corrosion depends on what means was chosen. Below, several ways will be described, with the help of which it will be possible to effectively remove rust from the car body.

After removing the damaged material, the area that has been damaged by corrosion should be further treated with a protective agent. For this purpose, you can use the filler. With the help of special plaster will not only remove the rust from the body of the car, but also create an even relief. The final stage is painting.

Car wash

As already mentioned, body cleaning is one of the most important stages. Remove the rust from the body of the car with your own hands will be more effective if all the damage is clearly visible. Thorough cleaning should be carried out both outside and inside the body. Special attention should be paid to the motor and luggage departments. Here, car owners often have to deal with corrosion.

It is undesirable to use detergents that are not designed to work with metal. On sale there are special auto shampoos that will not only perfectly clean the car, but also will not affect the condition of the surface. Car detergents perfectly remove grease, dirt, salt, chemical elements from the metal body. In addition, with their help you can restore the original shine to painting. If everything is done correctly, the corrosion elements will become more visible.

Before removing the rust from the body of the car, it is necessary to dry it. The natural process (drying in the open air) can take up to an hour. Much faster start to the main work will succeed, if you use a fan heater.

How to remove rust from the body of a car by mechanical means?

This option is more suitable for minor damage - the so-called "bugs". Many motorists noticed how small brown dots appear on the bodywork, which indicate the beginning of the corrosion process. The defect can be rectified mechanically. For this, a rough brush or sandpaper is used. Mechanical treatment can be carried out dry or wet. Thanks to the use of alcohol or kerosene, it is possible to more efficiently remove minor damage.

Much faster will be able to cope with the task of those car owners who have in their arsenal have a grinding machine. In advance, it is necessary to prepare small disks, which will remove the rust of 5-7 mm thickness. The equipment allows to obtain an ideal smooth surface without any traces of corrosion.

A perfect result can also be achieved by using a sandblasting machine. Cleaning is done by treating the car with air flow with particles of sand. Especially effective with such equipment it is possible to cope with "bugs". Sand affects the metal that is susceptible to corrosion. In this case, healthy areas remain intact.

When working with equipment for mechanical cleaning of the body, it is worthwhile to think about your own safety in advance. This is especially important if a sandblaster is used. It is worth using gloves and goggles to prevent small particles from entering your eyes.

Chemical cleaning

This method involves the use of various reagents - corrosion converters. What means to remove rust from the body of the car? There are several options. "The rust neutralizer VSN-1" is popular. After treating the damaged area with this liquid, corrosion turns into gray matter. Then it can be easily removed with a cloth.

Many transducers include orthophosphoric acid. The agent can be used in its pure form. But it is necessary to act with extreme caution. When using this tool, it is advisable to use rubber gloves.

Prevent further rust formation with zinc spray. In car shops on sale it is possible to meet means "Tsinkor-Auto" which creates on a surface of a body a special protective film. To pay attention to this spray is worth it for those who keep their vehicle under the open sky.

Additional body treatment

Than to remove rust from a body of the car? The tool will help to find a manager in a specialized store. The specialist will also tell you with what material it will be possible to return the body to its former form. After removal of corrosion on the damaged area, a degreasing compound must be applied.

Additionally, you can use a tool that will help protect the metal from damage in the future. With the help of a primer, the body can be protected from the harmful effects of environmental factors (moisture, heat, insects).

Putty and painting

A small layer of putty will level the area from which the rust has been removed. Work is necessary in gloves. The surface is leveled with a moisture resistant skin. You can use several layers of putty to achieve the desired result. After each application of the material, the damaged area should be leveled using sandpaper.

After the putty dries, you can start painting. The color should be selected carefully. It is not superfluous to apply for a consultation with a specialist. Even the difference for one shade will catch your eye in the daylight.

Summarize

Removing rust from the bodywork is quite an easy task. All you need to do is try to fix the defect immediately after it is discovered. The cost of materials will be insignificant compared to the cost of repair work to replace the rotten body area.