Quickly and simply we mount skirting boards on the floor

As a rule, after major repair work, builders mount skirting boards on the floor. This element performs at once two functions - aesthetic and practical. In the first case, it gives your repair, that is, the entire room, a complete and neat appearance, and in the second - covers the place of the joint of the floor covering and the wall. It is also worth noting that often plinths on the floor are mounted even if the repair is perfect, and such joints do not need to be concealed. This is done in order to easier to lay the wiring, because in modern finishing rails such a connector is provided.

The base from which each individual plinth is made

First we will consider what materials are used most often in order to make such an interior element. Nowadays, you can find skirting boards made of plastic, MDF and natural wood. The first category, as a rule, includes structures through which it is easiest to skip the wiring. They are strong enough, do not age, do not deform, and also can serve you for a long time. As a rule, plastic skirting boards on the floor are ideally combined with linoleum, in some cases with laminate, as well as with carpet and plain floor tiles. Finishing from MDF looks more natural and expensive. Most often it is combined with laminate, but in some cases it looks harmonious with both a parquet board and linoleum. Such skirting boards are easy to assemble, they are light and are quite cheap.

Incomparable classics of the genre

The most durable and demanded plinths on the floor are wooden. Their cost, of course, is much higher than for all the above-mentioned analogs, but the service life, aesthetic characteristics and environmental friendliness are all at the highest level. Such plinths are perfectly combined with a natural wooden floor covering, they also harmoniously look with carpet and laminate. Choosing a similar finishing element, you provide yourself with quality and reliability for many years. The main thing is just to take care of it properly, do not forget to cover it with varnish and make sure that direct sun rays and excessive moisture do not harm it.

How to install skirting boards on the floor

In order to understand every step of this editing work, we will divide everything into three stages and examine each of them in detail. The first thing that needs to be done is to install this building element along straight horizontal walls. The main thing is that the skirting board should lie flat against the wall, without any distortions and displacements. When you have leveled everything, we attach it with screws, twisting them all the way. If you mount a plastic skirting board, the joints of the laths are closed using decorative attachments. Wooden structures, as a rule, are chosen precisely for the size of the walls. The second stage is the positioning of internal corners. Plastic skirting boards are assembled as a designer, so in this case, the main thing is that the two slats at the same height converge, and you connect them with a corner. Wooden structures are simply puttyed and varnished. Well, the third step is similar actions, only now on the outer corners.

Note to the builder

If the walls are level, the flooring is strictly perpendicular to it, and there are no defects, then it is easy to understand how to fix the skirting boards to the floor so that they look harmonious and beautiful. Moreover, such work turns into pleasure in the event that it is carried out under conditions of an ideal repair. All you have to do is choose the appropriate step, with which the main fasteners will be made with screws. It is important that the plinth does not fray and does not lag behind the wall in places where it is not attached, otherwise all its functions will be reduced to none.