Pumps garden surface with ejector: reviews

If you are the owner of a country house, then for sure you faced the question of the need to use a surface pump. Let's look at what it is.

Need to use

The use of such equipment by specialists is considered effective and reasonable solution. With the presence of such a device, it can be ensured that the water supply will be provided in the required quantity to any point of the territory. In order to choose the best option for a private home, you need to familiarize yourself with the principle of operation and design features of the equipment.

What you need to know about the surface pump

Garden surface pumps can have different power, but with average performance the device will be able to pump 3 cubic meters per hour. If it is a question of powerful aggregates, then they are able to pass about 8 cubic meters of water per hour. Power of such units comes from the electric network 220 volts, the work can be provided in automatic or manual mode. If necessary, you can choose a device that is electronically controlled.

If you are interested in garden surface pumps that work without human intervention, then it is best to prefer equipment equipped with a hydropneumatic, or more precisely, an expansion tank.

Design features

As part of such a device contains a pump with an electric motor, a hose that is necessary for connection to the pump, a water filter, and a non-return valve. In addition to the listed components, it is possible to distinguish a manometer, an electric power cable, a pressure switch and a hydropneumatic tank, the capacity of which can be from 18 to 100 liters.

Such equipment is easy to install and fully operational. It is important to purchase units that are equipped with protection mechanisms against human factors, which also plays a big role.

Types of pumps

Garden surface pumps can have a built-in or remote ejector. This choice should be made depending on the location of the device axis relative to the surface of the water surface. The power of the plant can vary from 0.8 to 3 kilowatts.

Reviews about models with built-in ejector

If you are interested in garden surface pumps, then you can pay attention to models that have a built-in ejector. According to users, if the depth on which the water surface is located is not more than 8 meters, then it is necessary to stop your choice on such a model. Pumps with similar design features have the ability to pump liquid with air, mineral salts and foreign elements. The diameter of the latter should not exceed 2 millimeters. Consumers emphasize that this equipment is characterized by a low threshold of sensitivity.

Among other things, such installations have an impressive head, which can exceed the indicator of 40 meters. A surface garden pump flows liquid through a plastic rigid tube, which during the manufacturing process can be replaced by a reinforced hose. The diameter of the latter is determined by the manufacturer. The end of the hose, which is immersed in water, has a non-return valve. The design of the tube has a filter that eliminates the presence of large particle sizes in the water.

Consumers emphasize that the first start-up of the device should be carried out according to the rules prescribed in the instruction. A part of the hose must be filled with water before the check valve and the internal plane of the device are placed, which is poured through a special hole provided with a stopper. Those consumers who choose a surface garden pump with an integrated ejector are most often preferred by the following models: Grundfos Hydrojet, Wilo-Jet HWJ, and CAM.

Feedback on the pump with a remote ejector

A surface garden pump, reviewed in this article, may have a remote ejector. According to users, for the water surface, which is located just below 9 meters, this model is suitable. As the connecting elements are two pipes. Buyers rarely prefer these options, as the installation requires careful preparation, as well as careful attitude to the device. If water has a high content of all kinds of impurities, this can cause a mesh filter to break, which will cause blockage and the output of the unit.

Experienced summer residents, however, give one significant advantage, which is expressed in the possibility of installing the device far from the well. It can be an extra extension or a boiler room.

Reviews of the material in the body

Garden surface pumps with an ejector can have different levels of noise, durability, cost and stability of operation. These indicators will depend on the material that forms the basis of the hull. When it comes to steel, it looks beautiful, and also retains the properties of the liquid in its original, unchanged form. However, you will come across a problem with a high level of noise, which is not always to the liking of consumers. Buyers also note the rather high cost of such equipment. Cast iron housing will please a moderate level of noise. The only disadvantage is the possibility of rust.

Experts advise you to pay special attention to the presence of a protective layer when selecting. Surface garden pump Quattro elementi giardino 800, recommended to read about it in advance, has a plastic casing. As a plus, you should allocate a low level of noise, no rust, and low cost. Each model has its own positive and negative features. As for the plastic housings, among their shortcomings can be distinguished less than the impressive service life in comparison with the cases made of stainless steel.

The need to use electronic control

The surface water pump Al ko jet 3000 classic has an electronic control function. Before purchasing such equipment, you must decide whether there is any sense in using equipment with similar functionality. In order to answer this question, it is recommended to consider the positive features of such devices. Among the functions controlled by the electronic unit, it is possible to isolate the prevention of frequent inclusions, as well as dry running, when the water level drops and the equipment automatically stops working. Among other things, the electronic unit is responsible for reacting the pump to the operation of water intake points. The equipment can be switched off and switched on in automatic mode.

Some models after restarting the dry run protection are restarted and go into the waiting mode for fluid intake. The intervals between restart can be different. This period can last from 15 to 30 minutes. The garden surface pump xp05l is electronically controlled. As a useful opportunity is a gradual change in the speed of the electric motor. This functionality is made possible by an electronic speed converter. Thanks to this, the water supply system will not suffer from hydraulic shocks, and you will be able to save electricity.

As a unique minus of such models, as consumers mark, their impressive cost acts. Therefore, this equipment can not be called available for all dacha owners.

Negative feedback on surface pumps

If you decide to choose the described type of equipment, you should know about its negative features. Among them, as noted by summer residents, you can identify a high sensitivity to the presence of all kinds of impurities and water pollution. When using the ejector, the system's performance and reliability are significantly reduced. You can not call the advantage and the maximum depth with which you will have the opportunity to raise water. This factor forces buyers to choose their choice in the direction of equipment of a different type.

If you are planning to purchase a surface pump, you will most likely need to equip a separate room for it. This is due to the high noise level.