Nvidia Inspector: how to use in games?

The American company Nvidia annually produces dozens of new models of video cards that allow creating a variety of systems, both in performance and functionality. Gaming computers have become popular, often self-assembly. In addition to a powerful video card, there is a productive motherboard and processor. But not always the user lacks the system that he collected. Sometimes software interventions are needed, and to improve performance, he asks how to use Nvidia Inspector.

Program

It should be noted immediately that this software is not designed only for the optimization of games. Its main task is to monitor and change the parameters of the graphics accelerator. It is important to know that this application is designed only for the products of an American company and it will not be possible to improve the AMD-card.

Features

Before you understand how to use Nvidia Inspector, we will analyze its features. The program allows you to get a brief information about the characteristics of the accelerator. It monitors the frequency, voltage, temperature and analyzes the operation of the cooling system.

Soft is a tool for overclocking and increasing the level of performance. You can adjust the supply voltage, fan speed, edit the profiles of "firewood".

Preparation

So, to begin to understand the question of how to use the program Nvidia Inspector, you must prepare for the installation. Soft is free, it is easy to find on the Internet and install on your PC. But in order to work with it, it is necessary to understand whether we need overclocking at all.

Of course, almost any modern system can be improved. But sometimes it does not make any sense, and sometimes it can lead to problems. Therefore, if you have not quite balanced "stuffing", a weak processor and a strong graphics card, or vice versa, one of your components can not withstand the load. If the system is not optimized, there may be problems, programs in the background may interfere with the program or incorrectly configured drivers. All this needs to be checked before deciding how to use Nvidia Inspector.

results

Many users immediately want to understand what results they expect after overclocking. In general, if you have devices that are configured for additional overclocking, then there may be a 50% increase in frequencies. On average, this is 15-25%, which translates to "FPS" gives us an additional 20-30 frames.

It is important to understand that, however that may be, there is a certain risk of disabling one of the components of the system. The video card, although it is designed to improve, at least a minimum, with incorrect settings may just stop working. Nevertheless, if you understand overclocking or are configured to perform all the steps step-by-step, the risk of problems is extremely small.

And the last thing you should know, besides how to use Nvidia Inspector 1.9.7.3, that overclocking leads to a reduction in the service of the graphics accelerator. This is due to the increase in temperatures that occur when the frequencies and voltage are raised. All this affects the chip and its lifespan.

Overclocking

Before working with the program in games, you can try to conduct overclocking, which can significantly affect the growth of "FPS". You need to run the software and select Show Overclocking. The system will warn you that overclocking is dangerous and can disable the accelerator.

A new window will open in which the parameters and sliders for adjustment will be visible. The Performance Level section will be listed at the top. It can be changed, but you do not need to do this for overclocking.

Below, in this same window, there will be information on several parameters. To start overclocking, you need to find the frequency metrics and move the slider to 10% of the standard values. After clicking Apply Clocks & Voltage. In general, this increase should not affect the system. But if all the same the PC "was silent", disconnected or the drivers of the video card were removed, then the experiments ended.

Continuation

If everything is good, then we work further with Nvidia Inspector. How to use new parameters in games? Just need to run any game and follow the process. If sublangings, artifacts, automatic collapsing, etc. begin to appear, then all the indicators that we raised should be lowered approximately 10 MHz. If on the contrary, it became much better, we try to increase the performance by 10 MHz. Thus, we find values that are comfortable for the system.

Options

Before you will be a lot of unfamiliar words, as the software is in English. Of course, they can be translated or independently guessed, because as a whole, everything is not as mysterious as it might seem. Voltage Offset adjusts the voltage. This is clear from the title. Adding the voltage to your video card affects the increase in frequencies. Sometimes, in order to speed up a little more, this regulator comes into business. If you do not have to raise the frequency to a certain level, try adding voltage first. But all this must be done very carefully and in the event that the video card has a good potential.

The next parameter is Fan. With its setting, you can set a certain speed for the rotation of the cooler, so that the automatic adjustment does not constantly slow down and allows for efficient overclocking. Although it is desirable that this indicator is always on automatic tuning. So the system will independently determine the required speed and at high loads will increase the speed, and for small ones it will decrease.

For all the settings to take effect, you must click Apply Clocks & Voltage, if you are afraid that something went wrong, then reset all settings with Apply Defaults.

Details

Those who are trying to figure out how to use Nvidia Inspector should understand that overclocking in this case is the most secure, since it works at the driver level. Hardware overclocking is more dangerous and risky. But the disadvantage of software overclocking is that after the system is rebooted all parameters are reset. To avoid this, when you find the most suitable metrics, select Create Startup. So you will have your own preset in the form of a shortcut. Before starting the system, just click on it, and everything falls into place.

Games

To adjust the work of games, you need to learn how to use Nvidia Inspector Profile. First, you need to run Nvidia Inspector as administrator. When the window opens, you need to find Driver Version among all the parameters. There after the name of the video card there is a configuration icon. That's how we get into Profile.

Here you must specify the path to the game that we want to optimize. And this should be an absolute path with the extension client.exe. On the right, at the top, is the Apply Changes button. It allows you to save all the actions performed.

If you need to understand how to use Nvidia Inspector in CS, then choose the path to this game, save the changes and in the list find Threaded optimization. There will be a choice of several modes, you need to click on OGL THREAD CONTROL IGNORE GET ERROR. Now in the table, find the Shim rendering mode Options per application Optimus and from the list select SHIM RENDERING OPTIONS DEFAULT RENDERING MODE.

After all that has been done, we need to go into the Nvidia settings, in the "3D Options" tab there will be a "Management" section. The program for customization falls out of the list. Here we are looking for the game we need, which is already set up in Profile Nvidia Inspector. How to use in games GTA 5, CS: GO, DOTA 2, etc. again there is no sense to explain. The algorithm is the same.

When you have chosen your game in the drop-down list, or added it, you need to return to Profile again. In the table, select the SLI compatibility bits option on the line with the name of our game. In Artialiasing Behavior Flags, select None, in Memory Allocation Policy - Aggressive pre allocation.

conclusions

It should be understood that the above settings are only experimental. They can both approach your system, and leave it in its initial state. Therefore, expect from this process of unprecedented changes in games is not worth it. This option is usually suitable for owners of weak PCs and laptops. When a user fights for each frame per second. As noted by users, this choice allowed to reduce both the amount and time of microfroze, slightly raised the "FPS" indicators.

The same can be said about the adjustment in Nvidia Inspector. Besides the fact that you need to clearly understand what you are changing and how to regulate, you will have to spend a lot of time on how to form the ideal parameters of the system. Otherwise, the system will fail or the drivers will fly away. Therefore, if you have no idea what exactly is changing and what each adjustment parameter means, it's better not to overclock.