Novokubansky brick: features, technical characteristics, cost

Consumers are already well aware that it is only necessary to purchase building materials from those manufacturers who have proven themselves from the best side. The number of such enterprises includes the plant in Novokubani OAO "NZKSM", which produces wall materials from ceramics. Among them, the priority product is a building brick.

About the manufacturer

The plant was opened in 1987 and from the very first day it began to produce high quality products. The secret of this was the use of the latest equipment. Over the past time, the equipment itself and the manufacturing technologies have changed significantly: the process is automated, and the work is optimized. This approach influenced not only the capacity of the enterprise, but also the quality of its products, which, in demand, far outstripped analogues from other manufacturers.

The best evidence of high quality, which distinguishes the Novokubansk brick, - reviews of those who have already purchased this kind of material. They indicate that the use of the material gives a rich, presentable appearance to any structure, and for several years the appearance of the brickwork does not undergo any external changes, despite the high humidity and unfavorable weather conditions.

Production features

Technology, which produces brick, was borrowed from the company Unimorando from Italy. The process itself consists in the fact that pure, without additives, the clay undergoes the formation process on the automatic line. After this, the resulting semifinished product is dried and subjected to firing in a tunnel furnace. And each furnace has 19 firing zones, the temperature in which reaches 1000-1100 ° C.

The specialists of the company carefully consider the choice of raw materials: clay is taken from the tested quarries and is pre-cleaned and processed. This ensures the receipt of environmentally friendly and safe products. The whole process is completely continuous, which provides an improvement in the physical and technical characteristics of finished products.

Product range

The plant produces a variety of wall ceramic products to cover all the needs of any construction site and embody a variety of architectural ideas. In particular, the product line includes Novokubansky brick, both decorative and traditional forms:

1. Single and thickened concave. Dimensions, respectively, 25 x 12 x 6.5 cm, weight 2.2 kg and 25 x 12 x 8.8 cm weight 3.0 kg.
2. Smooth with a weight of 4.5 kg and a size of 25 x 12 x 13.8 cm.
3. Decorative and finishing. Has two rounded corners. Single (25 x 12 x 6.5 cm, weight 2.2 kg) and thickened (25 x 12 x 8.8 cm weight 3.0 kg) are produced.
4. Hollow single. 25 x 12 x 6.5 cm, weight 2.8 kg.
5. Decorative-finishing hollow products of single and thickened type. They have one convex side. Dimensions are standard for each type,
6. Products that have four cut off corners. Used for "Lipetsk" masonry. Type - single and thick.
7. Products that have only two corners cut off. Weight of single - 2,2, and thickened - 3,0 kg.
8. Single and thickened brick products for laying fences with a weight of 2.0 and 2.8 kg.
9. Corrugated, hollow, facial brick. Dimensions - standard, weight 2.5 (single) and 3.5 (thickened) kg.

Specifications

The quality facing brick must meet the following requirements:

1. Strength - from 25 MPa.
2. Frost resistance - more than 50 cycles.
3. Moisture absorption is low (less than 6%).
4. The density index is 1600 kg / m³.
5. The color solution is saturated red.

The thermal conductivity of the material is about 0.6 watt / mS. This is a fairly low figure, since the Novokubansk brick has a void inside. Thanks to this winter, heat does not escape from the house, but in summer the heat does not penetrate inside.

Especially noteworthy is the aesthetics of Novokubanskaya products: practicality and a neat appearance of the facing material ensure the exquisiteness of the appearance of each building, regardless of style. Builders, using combinations of different types of masonry, can create real masterpieces from this material.

According to the listed indicators, it is determined how resistant the Novokubansk brick is to climatic conditions, since this determines the duration of operation, the preservation of the reliability of the structure and the attractiveness of its appearance.

Calculation of cost

Every builder who has heard about the quality of Novokubansky plant's products is necessarily interested in the most important question: how much is a brick? The price of products depends on several parameters:

1. Type of brick, which can be single or thickened.
2. Complexities of form.
3. Stamps.

For example, a single smooth brick for facing in the size of 25 x 12 x 6.5 cm will cost 9.5, and one and a half - 13.5 rubles apiece. For a red porous hollow ordinary stone of grade 175 it will be necessary to pay 33.76 rubles for one product.

Also, the price is influenced by the location of the purchase of the building material - everyone knows how much the brick costs from the producer: the price of the products is always slightly lower than in the construction market.