Motors of FLY Maverik: models, description, reviews

Motors of FLY Maverik are produced in the USA and for several years already enjoy the well-deserved honor among fans of cross-country motorcycles, pitbikes, enduro and ATVs all over the world. Most owners of this shoe note that for a relatively low price of 150-180 dollars, it is quite possible to get an excellent result. The company's lineup is not so wide, for today only 4 models are represented in it. However, everyone can choose what they like.

If you are planning to purchase the motorbikes FLY Racing Maverik, the feedback of owners and a detailed description of each of the available models will help determine the choice.

Made by bikers

Can someone understand the motorcycle racer better than another motorcycle racer? Speaking about the products of this brand, it is worth noting that the absolute majority of employees of the company "Fly Maverick" knows about motor sport not by hearsay. Personnel policy promotes attraction of fans of speeds and impassability to work on equipment. Not surprisingly, the company's products are in such demand, because it is created by those who love their work with all their heart.

By the way, the developers and creators are the first who test motorbikes FLY Maverik before they enter mass production. The staff of the company checks the equipment, as they say, on themselves.

Owner feedback

Consider some of the features that all motorbikes of FLY Racing Maverik MX possess.

The owners' reviews often mention a not too smooth seam on the edge of the sole. At the same time, most racers say that it can hardly be considered a serious drawback. Speaking objectively, it is not so easy to flash two layers of thick skin perfectly smoothly. Perhaps here reliability is more important than aesthetics.

The second obligatory moment, which should be considered before buying - the lack of a hinge. The cast ankle decoration plays to improve safety in the fall, but it's inconvenient to walk on foot in the Fly. Is this a disadvantage? Hardly. Many manufacturers choose a hingeless design, and some models cost an order of magnitude more than the budgetary series "Fly Maverick", but nevertheless have many admirers. Motobots are designed not for walking, but for driving.

Take into account the fact that it will be necessary to get used to a peculiar toe. If these are your first Maverick Fly bots, at first it may be inconvenient to switch gears. Many owners in the reviews write about the peculiar sensations and very little sensitivity. Work is no longer a foot, but a hip. About a smooth switch, you probably have to forget. Over time, such a sharpness in the management of many begins to seem even convenient.

Features

You can note some more features inherent in the entire series. All Motors of FLY Maverik are equipped with cast inserts that protect feet when falling. Thermal inserts protect from heated exhaust pipes. Inside the sole is a steel rod.

At present, improvements are continuing. Please note that different releases of the same model may differ from each other.

MX Series

The first model, released by the company in 2012, was the FLY Racing Maverik MX. They are designed for fans of enduro. The height of the shoes is 38 cm, the bootleg is protected from penetration of dirt and water inside. Some reviews of this model say that the foot can sweat while walking, but this does not happen when driving. Shoes of the first issues get wet under the rain. Probably, water penetrates through ventilation. The sole of the shoe is rubber.

Inside the sock is built a steel protective plate, the heel is strengthened. Depending on the size, there may be 3 or 4 fasteners on the boot. As they deteriorate or deteriorate, they can be replaced with new ones that are available for purchase through a dealer network. The insole inside the shoe is made taking into account the anatomical features of the foot; If necessary, it can be removed.

Continuation of the series became motobots FLY Racing Maverik MX F4. The reviews confirm that the problem with water permeability has been completely solved, these boots do not even run through medium fords, nor is heavy rain. Problems with sweating feet when walking, too, is much less than in the first models. I touched on the modernization of design. The buyer can choose bots of black, white, black and white, salad black and orange-black colors. The design is designed in such a way that the boots are ideally suited to motorcycle suits and suits of FLY Racing.

Motorcycles Cross FLY Maverik ATV for SUVs

These understated shoes have already been appreciated by many fans of four-wheeled vehicles. Quite frankly, the enduro is uncomfortable in them, so those who are looking for universal footwear for a motorcycle and ATV should give preference to another model.

But fans of ATV, who had time to test this model, note that they received excellent quality for the average money. The sole can be made of cast plastic or rubber, inside reinforced with steel.

Fasteners-fasteksy comfortable, pull and relax them with one hand. As with other models, they are replaceable. The patented mechanism of its own development "Fly Maverick" will not allow to jump out of the slot even a torn belt.

The model has a small height - 28 cm. Boots are produced only in black color and perfectly fit almost any suit for racing.

Shoes for young athletes

Motors FLY Maverik Mini designed for young racers. They are available in sizes 32nd inclusive and have all the advantages of adult brand shoes: steel-reinforced removable soles, ergonomic detachable insoles, comfortable locks, internal ankle protection, heel, toe, and heat-resistant integrated plates covering the legs from the exhaust pipes. This model is chosen by those who have just started to master the technique of enduro.

Relatively big price is fully justified by quality. In addition, many parents and coaches try to instill in young sportsmen the love of a good outfit from childhood.