Mask "Chameleon" for welding: is it worth buying?

The mask "Chameleon" for welding is a product of high technologies, introduced into mass production. These devices are now available to all workers, while labor productivity can increase by 30 percent or more. Careful owners try to supply personnel with just such devices, since they completely cover the welder's face from splashes and light radiation from the electric arc. In addition, the employee can rely on full protection from infrared and ultraviolet radiation.

Mask properties

The mask "Chameleon" for welding allows you to work in comfortable conditions, which increases the quality of products. The principle of its operation is quite simple. After switching on the arc, the light filter of the structure almost instantaneously (in 1/30 000 fraction of a second) darkens, protecting the welder from intense radiation, while the worker can see everything around quite clearly. This speed is achieved due to the fact that the filter is a set of layers of liquid special crystals that change their order in a certain way due to the arrangement between the polarized films.

The mask "Chameleon" for welding has various adjustment devices, including the manual setting of blackout levels. It weighs about 430 grams, most models have a size adjustment, which makes it possible to use the same equipment for personnel in different shifts. After the welding is turned off, the filter gradually, but quickly, becomes transparent, which makes it possible not to remove the mask when there is no special need for it. The equipment is reliably fitted to the head, which completely frees the hands.

From plus 70 to minus 40

The mask "Chameleon" for welding, issued by a bona fide manufacturer, has certificates of the PCT and CE. Here you need to be careful - Chinese counterfeits do not have the necessary properties. "Chameleons" of different brands can be used for work of any complexity, at temperatures from plus 70 to minus 40 degrees Celsius. Before you start working on the mask settings are set, which allow you to select parameters for a particular type of operation (manual, semi-automatic welding , etc.).

Mask for welding "Chameleon", the price for which can reach up to one and a half to two thousand rubles, is usually equipped with solar and lithium batteries, which allows using alternative and standard energy sources. Expensive samples are able to distinguish sunlight from welding, and also automatically turn off after 10-15 minutes after the end of the welding process. The electronics of this equipment allow the welder to "see the world" after the filter is clarified after 0.2-0.3 seconds.

Pros and cons of "Chameleons"

Mask for welding "Chameleon", reviews on which there are different, it is considered more comfortable in comparison with the mask with permanent dimming. However, professionals point to a number of shortcomings, including unwanted storage in the dark ( solar panels do not work ), the complexity of the system (electronics), the likelihood of errors in setting (may affect eyesight). Also experienced welders indicate that in conventional masks the protection of light filters performs more resistant to high temperatures and cheaper glass, while in Chameleon this role is played by expensive and less reliable plastic.