KamAZ-53605: technical specifications, photo

The KAMAZ-53605 dump truck, the characteristics of which will be discussed below, is a technique, the wheel formula of which is 4x2. Initially, this model was intended for service in some city institutions. The main distinguishing feature of the technology - installed side and rear fences, as well as an unusual frame.

Quite often KamAZ is produced as a chassis, which is then used in the creation of finished models. The car consumes little fuel, and still has a low enough mass, as for a freight carrier. Thanks to the wheelbase, it easily turns and maneuvers better.

KamAZ-53605: specifications

The truck is built in such a way that even an experienced driver may well be mistaken and do not specify the exact model of the dumper. This is due to the fact that the design is borrowed from the model 6520. Also this machine is like a children's toy because of the fences that are located behind and on the side. The platform was taken from a truck 55111. It looks cumbersome, but in the car KamAz-53605 looks laconically and miniature. The tailgate is equipped with an automatic opening function.

The frame also has a non-standard system. During unloading and loading, it suffers greatly, and the world around it constantly affects it. In this model, the frame is particularly stressed, even more than other chassis. The platform subframe is attached to the frame. At the rear, the installation has ideal features. A little further went bolts, and at the very beginning a spring is used.

Accurate characteristic

KamAZ-53605 weighs just over 8 thousand kg. At the same time, the load on the wheelbase diverges unevenly. For example, on the front leaves about 3 000, and the rest - on the back. The dump truck is capable of lifting 7.5 thousand kg of cargo. If we take all the weight of equipment, then it approaches the level of 16.5 thousand kg. The total mass of the machine is also distributed unevenly. The rear is 10 000 kg, and the front - 6 000. It is possible to attach a trailer, whose weight is about 14 thousand kg.

According to environmental requirements, the engine installed on the dump truck corresponds to the level of "Euro-2". The diesel unit has the function of cooling the air, due to which the power mechanism does not overheat. Cylinders are only eight, and they are located in the letter V. The fuel tank holds 350 liters. There is a five-stage mechanical transmission type. The wheels are a disk version. The car's platform is 6.5 m ³ . The maximum speed is not more than 80 km / h. The driver's cab is designed for 3 people and is located above the engine. There is no bed.

Engines

The truck KamAZ-53605 is equipped with modern powerful engines. In earlier copies, one could find such power units:

• Diesel engine . There is a turbocharging and cooling of incoming air. All the requirements of Euro-3 were satisfied. The volume of the engine is 10 liters, and the power is 260 horsepower. The cylinders are in the Latin letter V.
• Diesel unit. Its characteristics are completely analogous to those described above. The difference between them is only in power traction: the power is 240 horsepower.

Now the most powerful and most reliable engines are being produced, which are used in KamAZ. Their volume is about 12 liters, capacity - 280 liters. C., 8-cylindrical system.

Cost

In order to buy a chassis for the KamAZ-53605, it will take about 2.5 million rubles. It is possible to buy a used model, which will be cheaper. Among themselves, these options have different price categories, this is due to the standard settings and the state of the car itself.

Buy a crane "Ivanovets", the base of which is borrowed from KamAZ-53605, you can for 2 million rubles. Its average mileage is up to 10 thousand km. A little cheaper will cost RARZ on the platform of the described truck - 1.5 million rubles. You can rent equipment for 1500 rubles per hour.