Instructions for installing the siding with your own hands

Why is it so often when siding the exterior walls of the house is chosen exactly siding? And here everything is simple - it is affordable, has many colors, among which you can choose one that you like. In addition, it does not require special care - dust and dirt can be completely removed and a jet of water from the hose. Well, let's figure out how to properly fix this material, and also what is needed for this.

Installation instructions for vinyl siding

To begin with, stock up on quality materials and, most importantly, dried bars for the crate. If the tree is poor quality or poorly dried, then at the time of drying, deformation of the horizontal rows of siding, which are attached directly to the crate, can occur - accordingly, the appearance of the facade of the building will be spoiled.

When fixing the material, use only aluminum or other fasteners with anti-corrosion coating, because fasteners can collapse quite quickly under adverse conditions that are inherent in our climate. All fasteners must be screwed at least 40 cm apart. This is necessary so that when the sizing of the siding changes under the action of temperatures, its deformation does not occur. After all, like any PVC material, it has the property of shrinking and expanding under the influence of various environmental factors.

All instructions for installing the siding are advised to begin its fixing from the center of the panel to the edges and from the top down. This will prevent the curvature of the panel and allow more accurate observance of the thermal gaps. When installing, do not forget that the length of the panels should be shorter than the exact length.

Installation instructions for socle siding

All the necessary tools for this work and the principle of installation are similar. It is worth recalling that any siding is attached to the crate, which can be made of either wood or aluminum. In addition, the walls themselves must be insulated with mineral wool or other material before the lashing is secured. It is mandatory to use a vapor barrier, which prevents moisture from entering the rooms and the release of heat from them. And then you can start working, which must strictly comply with the instructions for installing the siding. Remember that the locks of the panels should be fastened easily, without pressure. This will save the necessary thermal gap between them and prevent curvature during expansion. To finish the windows and doors, you should use special spacers that do not disturb the appearance of the facade and give it extra grace.

And finally

If you strictly follow the instructions for installing the siding, then the work can be done on your own. Especially if you learn all the rules, the most important of which are the following.

1. Never double-trim two walls at the same time. First, complete one, and only then start the next editing.

2. Do not use vinyl and socle siding for floor or roof.

It's that simple. But if you still do not understand the instructions for installing the siding or are not sure that you will cope with the work yourself - contact a specialist. He will do exactly as it should, and you will definitely be satisfied with the result.