AutomobilesCars

In the cold, the door does not close in the car: how to solve the problem, the recommendations of car owners

Cold seasons bring with them a lot of problems to vehicle owners. There are frequent cases when, due to frosts, the car turns into a locked bastion. It is extremely difficult to open or close the door. Even if somehow managed to unlock it, after that it can not be locked. To go on the road with the open is unreasonable and unsafe. To have knowledge, what to do when the door does not close in the car, you need to know about the simplest device of this mechanism.

Locking device

The general structure of the lock is represented by a latch of a turning type and a locking mechanism. These are details that allow them to be seen from the outside. There are several traction bars in the door, it is possible to have a servo to drive the rods and relays of the lock itself. In post-Soviet cars there is no electronics, the whole device has a mechanical mode of action. On the inner contour of the door and on the body of the body are installed rubber seals, which are responsible for the tight fit of it. On the installation line of the door latch on the body there is a fixing part. When trying to lock the auto door closing element comes into engagement with the body lock. Such details cause trouble in the winter cold. Can not work on locking or vice versa.

Why the door in the car does not close in winter

The main problem is the freezing of the lock mechanism, which does not work when trying to close. The hardened seal can also create obstructions to normal locking. It is not necessary to turn all the troubles to the effect of low temperatures. There is an option when the teeth of the latch are triggered, or the place of engagement on the body is developed. In this case, you can slam the door until the morning, but no effect will occur. The probability of freezing the castle itself is great. Then the door in the car with the keychain does not close. Freezing mechanism occurs due to the presence of condensate inside, formed after dishonest washing or a difference in temperatures in the cabin and on the street. The salon is poorly ventilated, the salon filter has become unusable. Consequences of such manifestations will be condensation of moisture. With minus drops of water will grasp and throw a headache to car owners. Havoc with the opening of the vehicle can occur with improper adjustments. Check the condition of the door hinges with a lack of lubricant. There is a possibility of weakening the fasteners of the lock - this will make it difficult to close the machine. When the door is not locked in the car with a key, special attention must be paid to the state of the core of the lock. The problem is that there is some gap between the larva and the body. When moisture gets into this gap, under frost, icing takes place, and locking the door becomes a troublesome task. Another of the problems complicating the closure is the wear of the lock spring. It is necessary to inspect the door carefully at the time of closing, there is a possibility of a spontaneous displacement of the retaining clip. For normal operation, adjustment is required by moving the stopper to the desired value.

Do not close the door in the car VAZ

The essence of problems for owners of cars of domestic production lies in the presence of a certain number of design flaws in the lock device, the principle of the operation of the links and the locking device. At any time of the year you can see how the owners of such vehicles make considerable efforts to close the door. The most rational solution is to tune in to replace the locking mechanism with a more modernized lock with a slightly different principle of operation. Larvae are a disease of early models of domestic cars. Some can be completely lost when traveling on poor-quality road surface. To eliminate this problem, it is necessary to insert rubber sealing rings. This will prevent unwanted particles and moisture from entering.

Is it possible to defrost the lock in winter with water

The first thought that comes to mind when the door freezes and does not close is to go warm up the water kettle and warm up the closing device. Such a process will bring an effect, but the consequences will make one think. The trouble is that the water being poured will remain inside the mechanisms and will certainly freeze back. It will simply create new troubles. It's a good idea to drive into a warm room, wait for the rusting and blow all the elements with warm, compressed air. Due to the constant presence of water, corrosive processes can develop.

How to prepare locks for colds

Before entering cold weather, the locking parts must be serviced. It will be necessary to purchase a thick grease by the type of solidol, and lubricate the elements of the closing mechanism. Such a lubricant does not freeze and will allow to minimize wear and development of parts. There is a need to check the condition of all seals. If defects are detected, replacement is required. Rubber sealing tapes have quite a cheap cost, because it makes sense to provide good care.

How to prolong the life of seals

Do not close the door in the car in the cold - the cause of this trouble is often the condition of sealing rubber. According to numerous advice of motorists, it is necessary to use special silicone grease. The processing with such a material will allow preserving the necessary properties of the seals, without feeling uncomfortable with the closing of the vehicle doors even in severe frosts. This will help extend the life of the sealing tape and not spend additional money on the purchase of new parts.

Is there a sparing way to defrost the lock

The modern market is full of offers of various antifreeze means of both domestic and foreign production. Various lubricants and special sprays are available. When the door of the car has frozen, it does not close, then with the help of these tools it is possible to cope with icing and freezing of parts of the locking system. The keyhole is treated by spraying. After a while, everything will be all right. This procedure will save you from the occurrence of such troubles in the future. The cost of such solutions ranges from 200-400 rubles.

What additional ways to warm the doors

If the door does not close in the car, and the lock succumbed to low temperatures, then, in the absence of other means, you can warm the mechanism with the help of warm air. It is necessary to arm yourself with a conventional hair dryer and blow the hot air from the problem areas. But such a procedure should not be expected to have a lasting effect. In the future, treatment with a view to permanent protection from colds will be required. When the door lock is not closed in the car, there is a way to heat the key with a lighter or by burning combustible materials. A method of using pure alcohol for thawing is possible. The effectiveness of such actions is present. But one should not expect such manipulations of a guaranteed result. This method is intended for extreme measures. It is worth to have any means in reserve. You can also cover the doors, get behind the wheel, start the engine and thoroughly warm it. After these actions, it is necessary to turn on the stove to the maximum with all the blows, and wait for the shut-off system to warm up and begin to function. It will help in a critical situation isopropyl alcohol, which is part of the antifreeze, but this can negatively affect the condition and further exploitation of the lock parts. There is a method of using kerosene, which is commonly used to facilitate loosening of threaded connections. This also works well for defrosting locks, but it damages the locking elements, washing off the grease. In the case of inspection of the sealant, remove debris and ice particles from the slots, wipe dry. When the handle of the door is frozen along with the keyhole, there is an option to apply a special plastic scraper, which allows to remove ice in hard-to-reach places. If thoughtless actions can easily break the larva of the castle, and this will entail unnecessary costs.

How to avoid trouble at frosts

All such problems occur because of the long stay of the car in the open air. The best way is to put the vehicle on a long parking lot in the garage, then you do not have to think about why the door in the car does not close. When traveling to work, you should place your car in heated parking lots. Otherwise, you will have to resort to chemical protection.

The work of the central castle in winter

The installation of the alarm and the presence of a remote control to close the car at the touch of a button adds convenience. Do not waste time locking with the keys. But with the arrival of sub-zero temperatures there can also be problematic situations, but there will be cases when the keys in the car, the doors are closed. The central locking system depends on the power source, and at minus the battery may lose its charge. In winter, there may be a case when, when trying to lock a vehicle, the desired action will not occur. The reason may be the failure of the electric actuators. Then it will be necessary to resort to a key or to press a mechanical bolt and close the door, having thought about the next opening. In winter time, it is necessary to pay attention to the state of the battery, the functioning of the central locking system depends on it. Now it's clear what to do when the door in the car does not close.

Composition against anti-freezing agents

The main constituents of such solutions are silicone and alcohol of different types. In other cases, other chemical constituents having cold-resistant properties are used. Silicone base also has an anti-corrosive effect. Also, some drivers advise the use of special automotive cosmetics, which contributes to the rapid thawing of doors.

How does car washing affect winter locks?

When visiting washing stations it is desirable to have confidence in the quality of drying. During washing, water can enter keyholes and other readily accessible openings. After washing, it is important that the machine is dried, otherwise the remaining water will turn into ice. In this case, there will be a situation where the door does not close in the car. It is necessary to wash the car at stations that have positive reviews and recommendations of car owners.

Are there SRTs engaged in defrosting doors

In particularly difficult situations, you can always resort to the help of professionals who do everything in the shortest possible time and without the appearance of difficulties. There are many workshops dealing with the problems of non-closing doors on vehicles. Specialists have vast experience in solving these problems and have a set of necessary tools to help provide qualified assistance. It is possible to provide services with departure to the parking lot. The trouble is to spend money when ordering services.

So, we found out why the door in the car does not close, what to do in this situation and how to solve the problem.

Similar articles

 

 

 

 

Trending Now

 

 

 

 

Newest

Copyright © 2018 en.atomiyme.com. Theme powered by WordPress.