How to String Strings on a Guitar: Tips

Sooner or later, any novice guitarist is confronted with the question of how to string the strings on a guitar, and do it correctly and promptly. Before asking this question, it is necessary to identify the reason why the gap occurred. If you only spoiled one string, and the rest you changed earlier, you can only replace the torn part. If the shift was long enough, it makes sense to change the whole set, as when worn out, the consumables tend to thin out, leading to a more dull and metallic sound. Now that we've decided on the number of strings, we'll look at how to stretch the strings to the guitar, using both metal and nylon components. It's not very difficult.

Let's take the first option - metal strings for a guitar, which you can buy in any specialized store. Prepare all the necessary, including the instrument itself, and proceed to the process. First, it is necessary to stretch the wire through a special hole - the string holder, to pass through a special slot for fixation and tighten up to the stop. Next, you should pass it into the peg, cut with wire cutters along the length, leaving a tail about 20 centimeters, and wind some turns so that they tightly press the free tip. It is not recommended to strongly pull it before wrapping to exclude the possibility of tug-of-war.

When installing strings on an electric guitar, you need to pay attention to the direction of the pins. When the tension is increased, the peg should rotate counter-clockwise, while loosening - clockwise. If the neck has two rows of pins - three on top and three from below, make sure that the direction of rotation of the top and bottom is different.

The second variant of fastening, when the head of the string passes through the guitar stand and is held by the fixing mechanism, is suitable for modern guitars. In this case, the string is fixed in two places - on the stand and the upper threshold, which provides better retention of the guitar when playing with active extraction of sound. Consider how to stretch the strings on a guitar with blocking mechanics.

One end of the wire should be fixed in the stand, using a special L-shaped key, and pass it through a special slot, having previously loosened the locking pin. Then do the preliminary roughing, fixing on the pincers and twisting to the required tension. We install a special screw for adjustment to the intermediate position, after which we fix the string on the upper flange. Now we can more accurately adjust the sound, using the tuning screws. It is clear that all these actions must be repeated for each string being installed.

Let's consider one more nuance, how to string strings on a guitar, using synthetic (nylon) strings. It is very important that the nylon does not slip out of the holes and is firmly fixed to the stand. The ends of the strings, in addition to fixing the tips, must be wound several times on the principle of marine Node. Also, when you wind them on pegs, it is recommended to hold with your hand, applying a little effort, so that the turns turn out even and more durable.

Take care that you always have interchangeable consumables. To buy strings for a guitar is better in advance, selecting sets with the necessary characteristics (softness, composition, etc.) so that in a force majeure situation you can quickly replace them.