How to sneak pants at the waist. How to give jeans flares a new life

Variable fashion dictates its own rules regarding the style of clothing - this is a long-known fact. And all women obey her orders only in order to always look attractive. This is the purpose of the constant renovation of the wardrobe. And almost every fashionista in the closet will have jeans or trousers, the style of which is somewhat outdated. The knee from the knee or from the thigh has long replaced models with straight or narrowed legs. And, it would seem, quite a new thing quickly from the favorites of the wardrobe instantly goes to the background. However, the change in fashion trends does not mean that obsolete trousers should be thrown out. Of course, they can continue to be worn, but to walk with the times, they can give a new life. How to do it? How to sew pants flared and make them fashionable "pipes"?

It also happens that the fabric stretches during socks, or after a regular diet can throw a few pounds, and that's the favorite thing is not so perfectly sits on the figure. How to cover pants in this case? It is about how to give a second life to your favorite pants, and we will go further.

How to change trousers

To give a new life to your favorite jeans, the style of which has long since sunk into oblivion, you should turn the pants inside out and draw a line from the waist down to the bottom, along which the new line will pass. The same should be done with the stepped seam of trousers. To do this, you can use a long ruler or take other jeans of a fashionable style and simply circle them around the contour. Next, sweep new stitches and try on trousers to make sure they are good in size. After that, all excess fabric is cut off, and edges are sewn. It should be noted that usually the length of the jeans flared more than straight trousers, and therefore they will need to be re-sewed.

How to reduce pants at the waist

It often happens that the owners of a thin waist and wide hips are faced with the problem of choosing trousers. Often with such features of the figure, the thing in the hips sits perfectly, but on the sides and on the back it is great. How to solve this problem and how to sew trousers in the belt? There are several ways that experienced masters use in expensive ateliers.

1 way: on the side seam

Many believe that this option is suitable only for those models that do not have side pockets in the seams of the product or any decorative rivets. However, this is not at all the case. First, we'll figure out how to sew trousers of classic cut from simple fabric without additional elements.

To begin with, it is necessary to turn the waistband a little for a distance of about 10 cm from the side seam in one and the other side. After putting on pants inside out and measuring the amount of excess fabric that should be removed, and under what slope do the bevel seam. It is best to use either the tailor's needles or a design. It should be noted that when laying a new line, the transition from the already existing side seam should be as smooth as possible so that no corners and unevenness appear on the fabric from the front side. Then, with the help of a special device or simple manicure scissors, you should open the old line and smooth the area with an iron. After adjusting the belt of trousers in size, cut off excess fabric, sweep it in place and sew on the sewing machine.

How to cover trousers, if there is a mass of decorative elements on the front and back panels? In this case, you need to measure how many extra centimeters you need to remove in your belt. You can open the side seam and move one of the panels, covering all centimeters on the area of trousers that is free from the decorative elements. Only it should be understood that in this case the lateral seam will move either forward or backward, depending on which side there are more ornaments.

2 way: additional taps

This option is suitable for those who have trousers strongly spanked in the belt on the back. Often, minor suturing of the product only on the sides does not solve this problem. In this case, a few additional darts on the back of the trousers will help. In order to make them, you should turn the belt around the back and cut it along the middle seam. After trying on the product, putting on the pants inside out and using the tailor's pins, snap symmetrical taps on both sides of the middle seam. Thus, in the belt can be removed up to 6 cm. After it remains to fit the upper bar to a new size and sew it into place. Even an inexperienced seamstress can cope with such work, since it is the easiest to cover trousers in this way. Here you do not have to break off the vertical factory seams and make decorative stitches again.

3 way: on the back seam

Many masters reduce pants in the belt only on the back seam. This allows you to keep all the decorative elements on the sides of the product. How to sew women's pants on the back of the seam? First, you should completely rebuff the belt in the back area and dissolve the back line approximately to the middle. Next, you should put on and fasten your pants, and then sweep a new seam. After laying a new line on the sewing machine and adjusting the belt.